User's Manual
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using Peripheral Devices
- Connecting a Docking Station
- Connecting External Speakers
- Connecting an External Display
- Selecting Display Modes
- Using the Multiple Monitors Function
- Connecting an External Microphone
- Connecting a Universal Serial Bus (USB) Device
- Connecting a Printer
- Connecting an i.LINK Device
- Connecting to a Network (LAN)
- Customizing Your VAIO Computer
- Setting the Password
- Using Fingerprint Authentication
- Using Trusted Platform Module (TPM)
- Setting Up Your Computer with VAIO Control Center
- Setting Up Your Computer with VAIO Central
- Using the VAIO Status Monitor
- Using the Power Saving Modes
- Managing Power with VAIO Power Management
- Changing the Performance Setting
- Protecting Data from Unauthorized Use
- Configuring Your Modem
- Protecting the Hard Disk
- Upgrading Your VAIO Computer
- Precautions
- Troubleshooting
- Support Options
33
nN
Getting Started
3 Click to select the Enable Battery Care Function check box.
4 Select the desired maximum charge level.
5 Click OK.
IRX-3960_END
Removing the Battery Pack
!
You may lose data if you remove the battery pack while your computer is on and not connected to the AC adapter or if you remove the battery pack
while the computer is in Sleep mode.
IRX-3960_BGN
To remove the battery pack
1 Turn off the computer and close the LCD screen lid.
2 Slide the battery LOCK switch (1) inward and slide and hold the battery RELEASE latch (2) on the bottom of the
computer.