User's Manual
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using Peripheral Devices
- Connecting a Docking Station
- Connecting External Speakers
- Connecting an External Display
- Selecting Display Modes
- Using the Multiple Monitors Function
- Connecting an External Microphone
- Connecting a Universal Serial Bus (USB) Device
- Connecting a Printer
- Connecting an i.LINK Device
- Connecting to a Network (LAN)
- Customizing Your VAIO Computer
- Setting the Password
- Using Fingerprint Authentication
- Using Trusted Platform Module (TPM)
- Setting Up Your Computer with VAIO Control Center
- Setting Up Your Computer with VAIO Central
- Using the VAIO Status Monitor
- Using the Power Saving Modes
- Managing Power with VAIO Power Management
- Changing the Performance Setting
- Protecting Data from Unauthorized Use
- Configuring Your Modem
- Protecting the Hard Disk
- Upgrading Your VAIO Computer
- Precautions
- Troubleshooting
- Support Options
130
nN
Customizing Your VAIO Computer
5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
To change or remove the power-on password
1 Turn on the computer.
2 Press the F2 key when the VAIO logo appears.
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo
appears.
3 Enter the current password and press the Enter key.
4 Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the
Enter key.
5 On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter
key.
When confirmation to save the changes is prompted, press the Enter key.
6 Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
At the confirmation prompt, press the Enter key.
Except IRX-3960_END
IRX-3960_BGN
Except China_BGN
Except Euro_BGN