User's Manual
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using Peripheral Devices
- Connecting a Docking Station
- Connecting External Speakers
- Connecting an External Display
- Selecting Display Modes
- Using the Multiple Monitors Function
- Connecting an External Microphone
- Connecting a Universal Serial Bus (USB) Device
- Connecting a Printer
- Connecting an i.LINK Device
- Connecting to a Network (LAN)
- Customizing Your VAIO Computer
- Setting the Password
- Using Fingerprint Authentication
- Using Trusted Platform Module (TPM)
- Setting Up Your Computer with VAIO Control Center
- Setting Up Your Computer with VAIO Central
- Using the VAIO Status Monitor
- Using the Power Saving Modes
- Managing Power with VAIO Power Management
- Changing the Performance Setting
- Protecting Data from Unauthorized Use
- Configuring Your Modem
- Protecting the Hard Disk
- Upgrading Your VAIO Computer
- Precautions
- Troubleshooting
- Support Options
104
nN
Using Peripheral Devices
To connect a projector
IRX-3960_BGN
!
The monitor (VGA) port on the computer is not accessible when the computer is attached to the docking station.
IRX-3960_END
1 Connect the power cord (1) of your projector into an AC outlet.
Except IRX-3960_BGN
2 Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the port replicator.
Except IRX-3960_END
IRX-3960_BGN
3 Plug an RGB signal cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the docking station.
IRX-3960_END
4 Plug an audio cable (4) (not supplied) into the headphones jack (5) i on the computer.
5 Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).