User Manual
Table Of Contents
- Before Use
- Getting Started
- Using Your VAIO Computer
- Using the Keyboard
- Using the Touch Pad
- Using Special-function Buttons
- Using the Quick Web Access Function
- Using the Built-in Camera
- Using the Optical Disc Drive
- Using "Memory Stick"
- Using Other Modules / Memory Cards
- Using the Internet
- Using the Network (LAN)
- Using the Wireless LAN
- Using the Wireless WAN
- Using the International Roaming Service
- Using the BLUETOOTH Function
- Using Fingerprint Authentication
- Using the TPM
- Using Peripheral Devices
- Customizing Your VAIO Computer
- Upgrading Your VAIO Computer
- Precautions
- Troubleshooting
- Trademarks
- Notice
185
nN
Troubleshooting >
Optical Discs
Optical Discs
Why does my computer freeze when I try to read a disc?
The disc that your computer is trying to read may be dirty or damaged. Follow these steps:
1 Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.
!
Turning off your computer with the Ctrl+Alt+Delete keys may cause loss of unsaved data.
2 Remove the disc from the optical disc drive.
3 Check the disc for dirt or damage. If you need to clean the disc, see Discs (page 147) for instructions.
What should I do if the drive tray does not open?
❑ Make sure your computer is in Normal mode.
❑ Press the drive eject button.
❑ The optical disc drive on your computer may have been disabled in the BIOS setup screen. Follow the steps in Disabling
Built-in Devices (page 133) to enable the drive.
❑ If the drive eject button does not work, click Start and Computer, right-click the optical disc drive icon, and select Eject.
❑ If none of the above options work, insert a thin, straight object (such as a paper clip) into the manual eject hole on the
optical disc drive.
❑ Try restarting your computer.