Operation Manual

NAS-Z200DiR/Z200iR.GB.4-151-738-12(1)

Getting started

Setting the clock

The time must be correctly set on the clock for

the correct operation of some features. Do the

procedure below to set the clock.

Note

The unit is factory set to start playing demonstration

automatically if no operation is performed for about 60

seconds. To disable the automatic demonstration, set the

clock.

Select [Settings] from the Home

menu.

Settings menu appears.

Select [Common Setting] – [Clock

Setting].

When the clock has not been set, “0:00”

appears. When the clock has been set, current

time appears. A 24-hour clock is used for the

time display.

Select [Change] .

Press / to set the hour and press

ENTER.

Press / to set the minute and

press ENTER.

Select [OK].

To cancel the procedure

Select [Cancel] in step 6, or press HOME.

To go back to the previous display

Press BACK.