Operation Manual

Basic Operations
15
Recording from the
radio
ª AUTO REVERSE ·
3 Press § and insert a blank tape into
deck B.
4 Press r REC.
Deck B stands by for recording.
5 Press DIRECTION MODE
repeatedly to select A to record on
one side. Select ß (or RELAY) to
record on both sides.
6 Press P PAUSE on deck B.
Recording starts.
To stop recording
Press π on deck B.
Tips
•If you want to record from the reverse side, press
ª so that ª (for reverse side) lights up.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, use 0 – and ) +
to tune in the desired station manually.
•When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
“DOLBY NR ON” appears after pressing r REC.
•If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Note
Dolby NR and DIRECTION MODE (ß or RELAY)
is off when the mains AC power supply is switched
off.
With the side
you want to
record facing
forward
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO2) tapes. The
recording level is automatically adjusted.
1 Press TUNER BAND to select the
band you want.
2 Turn the jog dial to tune in a preset
station.
Turn counter-
clockwise for
lower preset
numbers.
Turn clockwise
for higher
preset numbers.
Frequency
Preset number
ß
RELAY
RELAY
DAILY 1 2 REC SLEEP
DAILY 1 2 REC SLEEP
DOLBY NR
DOLBY NR
PROGRAM
PROGRAM
REPEAT1
REPEAT1
SHUFFLE
SHUFFLE
ALL DISCS1
TUNED
TUNED
MONO
MONO
STEREO
STEREO
SYNC
SYNC
STEP
STEP
MHz
kHz
kHz
REC
REC
t
VOLUME
SUR
1
1
2
DOLBY NR
3
4
5
6
DSP
CD
1/u
1/u
(power)