Operation Manual

11
Basic Operations
To
Stop playback
Pause
Select a track
Find a point in a
track
Select a CD
Play only the CD
you have
selected
Play all CDs
Remove or
change the CDs
Adjust the
volume
* AMS: Automatic Music Sensor.
Tips
•Pressing · while the power is off automatically
turns the power on and starts CD playback if there
is a CD on the tray (One Touch Play).
•You can switch from another source to the CD
player and start playing a CD just by pressing ·
or one of the DIRECT PLAY buttons (Automatic
Source Selection).
•If there is no CD in the player, “NO DISC”
appears in the display.
•You can change the CD in the loading position
during playback.
Do this
Press p.
Press P. Press again to resume
playback.
During playback or pause,
turn the jog dial clockwise (to
go forward) or anticlockwise
(to go backward) and release it
when you reach the desired
track.
Or press AMS* + (to go
forward) or AMS* = (to go
backward) on the remote.
Press and hold ) or 0
during playback, and release
at the desired point.
Press one of the DIRECT
PLAY buttons (or DISC SKIP).
Press 1/ALL DISCS repeatedly
until “1 DISC” appears.
Press 1/ALL DISCS repeatedly
until “ALL DISCS” appears.
Press 6 OPEN.
Turn VOLUME (or press
VOLUME +/– on the remote).