Operation Manual

34
GB
D:\SONY TV\SY150141_QW EU IM\4584774111_GB\060ADD.fm masterpage: Left
KDL-48WD65x / 40WD65x / 40RD45x / 32WD60x / 32RD43x
4-584-774-11(1)
 There are floors or walls between the wireless
router (access point) and TV.
If the problem persists even after checking the
above, try making a wired LAN connection.
Poor picture on Internet Video
 Quality depends on the original video provided by
the internet contents provider and your
connection bandwidth.
Certain internet contents displays a loss of
detail, especially during fast-motion or dark
scenes
 Video quality and picture size depend on
broadband speed and delivery by content
providers.
Good picture quality but no sound on the
internet contents
 Quality depends on the original content provided
by the internet contents provider and your
connection bandwidth.
 Due to the nature of Internet video, not all videos
will contain sound.
Your TV cannot connect to the server
 Check the LAN cable or connection to your server
and your TV.
 Check if your network is properly configured on
your TV.
A message appears stating that the TV cannot
connect to your network
 Check the current network settings. Press HOME,
then select [Settings]
t [System Settings] t
[Set-up]
t [Network] t [Network Set-up] t
[View Network setting and status]. If all of your
network settings are “-”, your server may not be
connected properly. Check your network
connections and/or server’s instruction manual
for connection information.
 Reconfigure your network settings.
 If the LAN cable is connected to an active server
and the TV has acquired an IP address, check your
DLNA Certified™ media server’s connections and
configurations.
Note
 Your IP address configuration can be viewed by
selecting the [View Network setting and status]
option.
DLNA Certified™ media server is inaccessible
although it is listed under [Media] in the
Home Menu
 Check your LAN cable/connection or your server
connections. The TV may have lost connection
with the server.
 Perform [Server Diagnostics] to check if your
media server is properly communicating with the
TV. Press HOME, then select [Settings]
t [System
Settings]
t [Set-up] t [Network] t [Home
Network Setup]
t [Server Diagnostics].
When using the renderer function, music files
cannot be played back
 Some applications display a photo file pre-
installed in the PC simultaneously with music
playback when using the renderer function.
Depending on the pre-installed photo file, music
playback may not be possible, but may become
possible by changing the photo file.
You could not connect Internet
 Check that the LAN cable or AC power cord of the
router/modem* has been connected properly.
* Your router/modem must be set in advance to
connect to the Internet. Contact your Internet
service provider for router/modem settings.
You do not have YouTube ID
 If you do not have a YouTube ID and password,
register them through the address below.
http://www.google.com/device
(You can also register a YouTube ID and password
from your PC.)
After registering your ID, you can use it
immediately.
The TV turns off automatically (the TV enters
standby mode)
 Check if the [Sleep Timer] is activated (page 24).
 Check if the [Duration] is activated by [On Timer]
(page 24) or [Photo Frame Settings] (page 24).
 Check if the [Idle TV Standby] is activated
(page 26).
Some input sources cannot be selected
 Select [AV Preset] and select [Always] of the input
source (page 25).
The remote control does not function
 Replace the batteries.
HDMI equipment does not appear on [BRAVIA
Sync Device List]
 Check that your equipment is compatible with
BRAVIA Sync Control.
Cannot select [Off] in [BRAVIA Sync Control]
 If you have connected any audio system that is
compatible with BRAVIA Sync Control, you cannot
select [Off] in this menu. To change the audio
output to the TV speaker, select [TV Speakers] in
the [Speakers] menu (page 25).
General