Operation Manual

26
GB
Eco
Power Saving
Selects the power saving mode to reduce the power consumption of the TV.
“Standard”: Default settings.
“Reduce”: Reduces the power consumption of the TV.
“Picture Off”: Switches off the picture. You can listen to the sound with the picture
off.
Idle TV Standby
Selects the time (“1h”, “2h” or “3h”) to set the TV into standby mode automatically,
if you do not operate the TV for the specified period of time.
PC Power
Management
When this is set to “On,” turns to standby mode if no PC signal is received. Only
available in PC input.
Reset
Resets all the “Eco” settings to the factory settings.
Features
Screen Format
Screen Format
(only in PC mode)
Changes the screen format. For details about the screen format, see page 15.
z
• “Auto” is available for PAL and SECAM signals only.
“Normal”: Displays the picture in its original size.
“Full”: Enlarges the picture to fill the display area.
RGB Centre
Adjusts the horizontal picture position so that the picture is in the middle of the
screen.
z
• This option is only available if an RGB source has been connected to the Scarts connectors
/ / AV1 or / / AV2 on the rear of the TV.
PC Adjustment
Customizes the TV screen as a PC monitor.
z
• This option is only available if a PC signal is received.
“Phase”: Adjusts the screen when a part of a displayed text or image is not clear.
“Pitch”: Enlarges or shrinkes the screen size horizontally.
“Horizontal Shift”: Moves the screen to the left or to the right.
“Vertical Shift”: Moves the screen up or down.
“Reset”: Resets to the factory settings.
Sleep Timer
Sets a period of time after which the TV automatically switches itself into standby
mode.
When the “Sleep Timer” is activated, the (Sleep Timer) indicator on the TV front
panel lights up in orange.
z
• When you turn off the TV and turn it on again, “Sleep Timer” is reset to “Off”.
• A notification message appears on the screen one minute before the TV switches to standby
mode.