Operation Manual

32
GB
You can add wireless speakers
manufactured by Sony (not supplied) as
the surround speakers of the system.
For details about applicable speakers,
refer to the following URL.
http://sony.net/nasite/
The wireless surround function will be
available with the system version
M34.R.2000 or later and the wireless
speaker version 2.00 or later. If you cannot
set the wireless surround function, version
of the system or wireless speaker may not
be the latest version. To check the system
version information, see [System
Information] (page 44). For details about
the updating method of the system, see
[Software Update] (page 41).
For details about the updating method of
the wireless speaker, refer to the operating
instructions of the wireless speaker.
To perform the setting on the
system
1 Install the applicable speakers,
and turn them on.
2 Press HOME.
The home menu appears on the TV
screen.
3 Select [Setup] from the home
menu.
The setup display appears on the TV
screen.
4 Select [Wireless Surround
Settings].
5 Perform the setting by following
the on-screen instructions.
To perform the setting on
SongPal
1 Install the applicable speakers,
and turn them on.
2 Select the system on SongPal,
then perform the setting by
following the instructions on
SongPal.
The SongPal settings are effective with the
SongPal version 4.0 or later. For details
about SongPal downloading, see “Using
SongPal” (page 30).
Adding Rear Speakers
(Wireless Surround)
Note
Note