Sound Bar Operating Instructions GB CT The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. http://www.sony-asia.
WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance.
Table of Contents What’s in the Box ..........................5 What You Can Do with the System .....................................6 Guide to Parts and Controls ..........8 About the Home Menu ................ 13 Setup Startup Guide Basic Setup (separate document) Connecting a 4K TV and 4K Devices .................................. 15 Connecting a TV or Portable Audio Device via the ANALOG IN Jack .........................................17 Connecting to a Wired Network ............................
Deactivating Buttons on the Main Unit ........................................ 45 Changing the Brightness of the Front Panel Display and BLUETOOTH Indicator (DIMMER) .............................. 46 Saving Power in Standby Mode ..................................... 46 Sending the Remote Signal to the TV via the Main Unit ..............47 Using the Control for HDMI Function .................................47 Using the “BRAVIA” Sync Function ................................ 49 Using the Setup Display ......
What’s in the Box • HDMI cable (supports the specification equal to Premium High Speed HDMI cable with Ethernet) (1) • Bar Speaker (1) • WALL MOUNT TEMPLATE (1) • Grille frame (1) • Subwoofer (1) • Startup Guide • Remote control (1) • Operating Instructions • R03 (size AAA) battery (2) 5GB
What You Can Do with the System “Listening to the TV” (page 24) “Listening to the Connected AV Device” (page 24) Blu-ray Disc™ player, cable box, or satellite box, etc. Connecting the TV and other devices (refer to “Startup Guide” (separate document) or see “Connecting a TV or Portable Audio Device via the ANALOG IN Jack” (page 17).
“Connecting to a Wired Network” (page 18) Modem Router Internet “Connecting to a Wireless Network” (page 19) Wireless LAN router “Listening to Music on your PC via a Home Network” (page 36) “Listening to Music from a Mobile Device” (page 31) “Listening to Music on the Mobile Device with Sony | Music Center” (page 37) “Listening to Sound of the Connected TV or Device from Headphones” (page 34) “Listening to the Same Music in Different Rooms (Wireless Multi Room)” (page 41) 7GB
Guide to Parts and Controls Details are omitted from the illustrations. Bar Speaker (Main Unit) Front (power) button Turns on the system or sets it to standby mode. (input select) button (page 13, 24) BLUETOOTH PAIRING button (page 31) (MUSIC SERVICE) button (page 40) +/– (volume) buttons (USB) port (page 25) N-Mark (page 32) When using the NFC function, touch your NFC-compatible device to the mark.
Rear ANALOG IN jack TV IN (OPT) jack HDMI OUT (TV (ARC)) jack For the specifications and note on connections, see “Supported HDMI Video Formats” (page 73). HDMI IN 3 jack For the specifications and note on connections, see “Supported HDMI Video Formats” (page 73). LAN(100) port HDMI IN 1 jack For the specifications and note on connections, see “Supported HDMI Video Formats” (page 73).
Subwoofer On/standby indicator – Lights in red: The subwoofer is not connected to the system – Lights in green: The subwoofer is connected to the system – Lights in orange: The subwoofer is connected to the system with the Secure Link function – Flashes in green: The subwoofer is attempting to connect to the system – Flashes in orange: The subwoofer is attempting to connect to the system with the Secure Link function – Turns off: The subwoofer is in standby mode / (on/standby) button Turns on the sub
Remote Control INPUT +/– (page 13, 24) (power) Turns on the system or sets it to standby mode. DISPLAY** Displays playback information on the TV screen. Playback information is not displayed for TV input. CLEAR AUDIO+ (page 27) SOUND FIELD (page 27) VOICE (page 29) NIGHT (page 28) DIMMER (page 46) Color buttons Shortcut keys for selecting items on some menus. MUSIC SERVICE (page 40) BLUETOOTH PAIRING (page 31) OPTIONS** (page 30, 58) Displays the options menu on the TV screen.
Playback operation buttons / (rewind/fast forward) Searches backward or forward. / (previous/next) Selects the previous/next chapter, track, or file. (play)* Starts or re-starts playback (resume play). (pause) Pauses or re-starts playback. (stop) Stops playback. BLUETOOTH RX/TX (BLUETOOTH receiver/transmitter) (page 35) AUDIO* (page 45) * The AUDIO, , and + buttons have a tactile dot. Use it as a guide during operation.
About the Home Menu You can display the home menu on the TV screen by connecting the system and TV with the HDMI cable (supplied). From the home menu, you can set the various settings by selecting [Setup] or select the input or service that you want to watch from the input list. The home menu is displayed in the language that is selected in [Easy Setup]. (The following screen is an example when selecting English.) [Setup] Input list Using the Home Menu ///, (enter) HOME BACK 1 Press HOME.
Input list Input name Explanation [TV] Outputs the TV sound. (page 24) [HDMI1] Outputs the sound of device that is connected to the HDMI IN 1 jack. (page 24) [HDMI2] Outputs the sound of device that is connected to the HDMI IN 2 jack. (page 24) [HDMI3] Outputs the sound of device that is connected to the HDMI IN 3 jack. (page 24) [Bluetooth Audio] Outputs the sound of device that is connected with the BLUETOOTH function.
When an HDCP2.2Compatible HDMI Jack on the TV is Labeled with “ARC” Basic Setup Refer to Startup Guide (separate document). Connecting a 4K TV and 4K Devices All HDMI jacks on the system support 4K video format and HDCP2.2 (Highbandwidth Digital Content Protection System Revision 2.2). To watch 4K video content, connect the 4K TV and 4K devices to the system via an HDCP2.2-compatible HDMI jack on each device. You can only view 4K video content through the HDCP2.2-compatible HDMI jack connection. HDCP2.
1 2 3 Check which HDMI IN jack on your TV is compatible with HDCP2.2. Refer to the operating instructions of the TV. Connect the HDCP2.2-compatible HDMI IN jack on the TV and HDMI OUT jack on the main unit with the HDMI cable (supplied). TV connection is completed. Connect the HDCP2.2-compatible HDMI OUT jack of the 4K device and HDMI IN jack of the main unit with the HDMI cable (not supplied).
To watch 4K video content, select the appropriate setting for the connected 4K TV and 4K device. 1 2 3 4 Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu. The setup display appears on the TV screen. Connecting a TV or Portable Audio Device via the ANALOG IN Jack To connect following devices to the system, connect them via the ANALOG IN jack on the system.
Connecting to a Wired Network Prepare the network by connecting the system and PC to your home network with a LAN cable. Connecting to a PC or Router with a LAN Cable The following illustration is the example for connection of the system and PC to your home network. Connecting by Obtaining the Network Information Automatically 1 2 3 4 5 Modem Select [Network Settings] [Internet Settings] - [Wired Setup]. Select [Auto]. Select [Save & Connect]. The system starts connecting to the network.
5 Select [Save & Connect]. The system starts connecting to the network. For details, refer to the messages that appear on the TV screen. Connecting to a Wireless Network Prepare the network by connecting the system and PC to your wireless LAN router. Note The server needs to be connected to the same network as that of the system.
Connecting by Selecting the Network Name (SSID) Connecting by Using a Fixed IP Address If your wireless LAN router (access point) is not compatible with Wi-Fi Protected Setup (WPS), check the following information in advance. – The network name (SSID)* Select [New connection registration] [Manual registration] in step 4 of “Connecting by Selecting the Network Name (SSID)”and follow the on-screen instructions.
You can mount the main unit on a wall. About the Installation Location of the Main Unit The main unit outputs the surround sound toward the ceiling. To ensure that the TV does not interfere with the output sound from the main unit, decide on the installation location of the main unit by referring to the following estimated values. (A) Notes • Prepare screws (not supplied) that are suitable for the wall material and strength.
Mounting the Main Unit on a Wall 1 3 Prepare screws (not supplied) that are suitable for the wall mount holes on the rear of the main unit. Mark the screw positions described as bellow on SCREW LINE () of WALL MOUNT TEMPLATE. Measure the distance described below with a scale, then mark using a pencil, etc. 422 mm 422 mm 4 mm More than 30 mm Screw position 4 4.6 mm Fasten the screws into the mark. 10 mm Hole on the rear of the main unit 2 Stick WALL MOUNT TEMPLATE (supplied) on a wall.
Note Attaching the Grille Frame Setup When sticking WALL MOUNT TEMPLATE, smooths it out fully. You can protect the speakers by attaching the supplied grille frame. We recommend that you use the main unit without attaching the grille frame if you will be listening to High-Resolution Audio. Attach the grille frame parallel to the front panel. Insert the projections of the grille frame into the hole on the main unit. Tip The grille frame is fixed by a magnet.
Listening to the Sound Listening to the TV 1 2 3 4 Press HOME. The home menu appears on the TV screen. Listening to the Connected AV Device 1 2 Select [TV] on the home menu. Select the program using the TV’s remote control. The selected TV program appears on the TV screen and the TV sound is output from the system. Adjust the volume. • Adjust the volume by pressing +/– on the remote control. • Adjust the subwoofer volume by pressing SW +/– on the remote control (page 29).
4 Press to complete. Listening to Music on a USB Device You can play music files stored on a connected USB device. For playable types of files, see “Playable Types of Audio Files” (page 71). 1 Tip Connect the USB device to the (USB) port. When you change the input name, the displayed icon is also changed automatically. 2 3 4 5 Press HOME. The home menu appears on the TV screen. Select [USB (Connected)] from the home menu. Select the folder on which songs are stored - song.
Note Do not remove the USB device during operation. To avoid data corruption or damage to the USB device, turn the system off before connecting or removing the USB device. Tip You can perform various operations from the options menu (page 58).
Selecting the Sound Effect Explanation [Movie] You feel immersed by the sound that travels behind you and surrounds your entire body. This mode is suitable for watching movies. [Music] Vividness and glossiness of the sound are expressed in detail. This mode is suitable for enjoying music in a way that moves you. [Game Studio] You can immerse yourself in your game by reproducing the feeling of movement and distance of objects, as well as clearly hearing the dialog.
• The virtual surround is processing when a sound field other than [Music] is selected, though this may not work if audio source is not multi-channel. Tips • You can select [ClearAudio+] by pressing CLEAR AUDIO+ on the remote control. • You can select the sound field from the options menu (page 58). Enjoying Clear Sound with Low Volume at Midnight (NIGHT) Sound is output at low volume with minimum loss of fidelity and clarity of dialogue. NIGHT 1 2 Press NIGHT. The night mode appears on the TV screen.
Making Dialogues Clearer (VOICE) Adjusting the Volume of the Subwoofer The subwoofer is designed for playback of bass or low frequency sound. Selecting the Sound Effect VOICE SW +/– 1 2 Press VOICE. The voice mode appears on the TV screen. Press the button repeatedly to select the voice mode. Mode Explanation [Up Off] Standard [Up 1] Dialogue is easily heard by enhancing dialogue range. [Up 2] Dialogue range is enhanced, and dialogue sound may be easy to hear for the elderly.
Adjusting the Delay Between the Picture and Sound When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. The setting method differs depending on the input. ///, OPTIONS When Watching the TV 1 Press OPTIONS. “SYNC” appears in the front panel display. 2 Press or The adjusting time appears in the front panel display. 3 Adjust the delay using /, then press . You can adjust from 0 msec to 300 msec in 25 msec increments.
Listening to Music/Sound with the BLUETOOTH® Function Listening to Music by Pairing with a Mobile Device 1 Listening to Music from a Mobile Device Press BLUETOOTH PAIRING. The system enters the pairing mode, “BT” appears in the front panel display, and the BLUETOOTH indicator flashes quickly. 2 INPUT +/– BLUETOOTH PAIRING 3 SW +/– HOME +/– 4 Playback operation buttons BLUETOOTH RX/TX 5 Turn on the BLUETOOTH function, and then select “HT-ST5000” after searching for it on the mobile device.
To check the connection status of the BLUETOOTH function Status BLUETOOTH indicator During pairing standby status Flashes quickly in blue Connection is being attempted Flashes in blue Connection has been established Lights in blue Not connected Off 4 5 Tips • Once the BLUETOOTH connection is established, an indication recommending which application to install will be displayed according to what device you have connected.
Compatible devices Smartphones, tablets, and music players with the NFC function built-in (OS: Android™ 2.3.3 or later, excluding Android 3.x) 1 2 Turn on the NFC function of the mobile device. BLUETOOTH indicator 3 4 Make sure that the BLUETOOTH indicator lights in blue. A connection between the system and mobile device has been established. Start audio playback with the music app on the connected mobile device. Sound is output from the system. Adjust the volume.
Listening to Sound of the Connected TV or Device from Headphones 6 You can listen to sound of the connected TV or device from BLUETOOTH-compatible headphones by connecting it with the BLUETOOTH function. 7 Listening to Sound by Pairing with Headphones 1 2 3 4 5 Set the BLUETOOTH-compatible headphones to the pairing mode. Refer to the operating instructions of the headphones for pairing method. Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu.
Listening to Sound with Paired Headphones 1 2 4 5 Select the desired input. For selecting input, see “Using the Home Menu” (page 13). Set the BLUETOOTH function of the headphones to on. Press BLUETOOTH RX/TX on the remote control. [Bluetooth Mode] is set to [Transmitter] and “BT TX” appears in the front panel display. The system automatically reconnects to the headphones it was most recently connected to, then the sound is output from the headphones. No sound is output from the system.
Listening to Music on a PC Listening to Music/Sound Using the Network Function PC Listening to Music on your PC via a Home Network You can play music files stored on your PC via your home network. Music files can be played by operating on the menu that is displayed on the TV screen or Sony | Music Center on a mobile device such as a smartphone or tablet. Preparing the Home Network 1 2 3 Connect the system to a network.
Listening to Music on a PC by Using Sony | Music Center PC Listening to Music on the Mobile Device with Sony | Music Center What You can Do with Sony | Music Center Wireless LAN router For details about Sony | Music Center, refer to the following URL. http://www.sony.net/smcqa/ You can play music files stored on the PC by operating Sony | Music Center that is installed to a mobile device such as a smartphone or tablet.
Enjoying music on the USB device You can play music on a device connected to the (USB) port on the main unit. Using Chromecast builtin Note Chromecast built-in allows you to select music content from the Chromecastenabled app and play back on the system or group that the system is included. What you can control with Sony | Music Center varies depending on the connected device. The specification and design of the application may change without notice.
7 Select and play music on the Chromecast-enabled app. The music is played on the system. Note Depending on the country and region, Chromecast built-in and the Chromecastenabled app may not be provided. Using Spotify You can select the music on the Spotify app and play it on the system. To play on the system, you need the Spotify Premium account. Enabling the “Spotify Connect” Function 2 3 4 5 Connect the mobile device by WiFi to the same network as that of the system.
Resuming the Music that has Played on the Mobile Device 1 Press MUSIC SERVICE. When you have played the music of Spotify on the system, the music that was played with Spotify is resumed. For details, see “Using the MUSIC SERVICE Button” (page 40). Using the MUSIC SERVICE Button To enjoy music services, the system must be connected to the Internet. MUSIC SERVICE Note The Spotify app may not be available in some countries/regions. Press MUSIC SERVICE. The music service list appears on the TV screen.
Connecting the Wireless Multi Room-Compatible Device (Wireless Multi Room) You can enjoy music in any room by using the system with the wireless multi room-compatible wireless speaker. You can operate with Sony | Music Center that is installed on a mobile device. To use multiple devices, connect them to the same wireless LAN. To perform setting on Sony | Music Center Perform the setting by following the help on Sony | Music Center.
Tip Using the Various Functions/ Settings You can change measurement units (feet or meters) by pressing the color button (RED). [Level] Customizing the Speaker Settings for Surround Sound To obtain the good surround sound, set the speakers distance from your listening position and their output level, etc. The default settings are underlined. 1 2 3 4 Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu. The setup display appears on the TV screen.
Performing the Wireless Connection of the Subwoofer (SECURE LINK) You can specify the wireless connection to link the system to the subwoofer using the Secure Link function. This function can help prevent interference if you use multiple wireless products or your neighbors use wireless products. SECURE LINK 3 4 5 6 Select [On]. Press SECURE LINK on the rear of the subwoofer. The on/standby indicator of the subwoofer flashes in orange. Proceed to the next step within 1 minute. Select [Start].
2 3 4 Select [Setup] from the home menu. The setup display appears on the TV screen. Select [System Settings] [Wireless Subwoofer Connection] - [RF Channel]. Select the setting you want. • [Auto] (default setting): Normally select this. The system automatically selects the better channel for transmission. • [1], [2], [3]: The system transmits sound by fixing the channel for transmitting. Select the channel with the better transmission.
Enjoying Multiplex Broadcast Sound (AUDIO) Deactivating Buttons on the Main Unit You can enjoy multiplex broadcast sound when the system receives a Dolby Digital multiplex broadcast signal. You can deactivate buttons on the main unit for preventing misoperation, such as child mischief (Child lock function). AUDIO Press AUDIO. The audio signal appears in the front panel display. 2 Press the button repeatedly to select the desired audio signal.
Changing the Brightness of the Front Panel Display and BLUETOOTH Indicator (DIMMER) You can change the brightness of the front panel display and BLUETOOTH indicator. DIMMER 1 2 Press DIMMER. The display mode appears in the front panel display. Press the button repeatedly to select the desired display mode. Mode Explanation “Bright” The front panel display and BLUETOOTH indicator light brightly. “Dark” The front panel display and BLUETOOTH indicator light darkly.
Sending the Remote Signal to the TV via the Main Unit When the main unit obstructs the remote control sensor of the TV, the TV remote control may not work. In that case, enable the IR repeater function of the system. You can control the TV with the remote control of the TV by sending the remote signal from the rear of the main unit. 2 3 4 Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu. The setup display appears on the TV screen.
completed, “DONE” appears in the front panel display. System Power Off Function When you turn off the TV, the system will turn off automatically. Set [System Settings] - [HDMI Settings] [Standby Linked to TV] on the system to [On] or [Auto] (page 55). The default setting is [Auto]. Note The connected device may not turn off depending on the status of the device. be available. For details, refer to the operating instructions of your TV.
Menu Operation by TV Remote Control You can select the system using the SYNC MENU button on the TV remote control and operate the system. This function can be used if the TV supports the link menu. For details, refer to the operating instructions of your TV. Notes • In the TV’s link menu, the system is recognized by the TV as “Player.” • Some operations may not be available with some TVs.
Echo Canceling Function Echo is reduced when you use Social Viewing function such as Skype while watching TV programs. This function can be used if the TV supports Social Viewing function. For details, refer to the operating instructions of your TV. Notes • If the input of the system is [HDMI1], [HDMI2] or [HDMI3] when using the Social Viewing function, the input is automatically changed to [TV]. Sound of the Social Viewing and TV program is output from the speakers of the system.
Using the Setup Display You can make various adjustments to items such as picture and sound. The default settings are underlined. 1 2 3 Press HOME. The home menu appears on the TV screen. Select [Setup] from the home menu. The setup display appears on the TV screen. Select the setting item. Setting item Explanation Updates the software of the system. (page 52) [Screen Settings] Makes the screen settings according to the type of TV.
[Software Update] By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: http://www.sony-asia.com/section/support Notes • It may take about 1 hour for the update to be completed. • An Internet environment is necessary to perform updates via Internet. • During a software update, “UPDT” appears in the front panel display. After the update is complete, the system automatically reboots.
[Audio DRC] You can compress the dynamic range of the sound track. [Auto]: Automatically compresses sound encoded in Dolby TrueHD. [On]: The system reproduces the dolby sound track with the kind of dynamic range that the recording engineer intended. [Off]: No compression of dynamic range.
* Only mobile devices such as a smartphone, tablet, WALKMAN® [Device List] Displays a list of paired and detected BLUETOOTH devices (SNK device) when [Bluetooth Mode] is set to [Transmitter]. [Bluetooth Standby] You can set the [Bluetooth Standby] so that the system can be turned on by a BLUETOOTH device even when the system is in standby mode. This function is only available when you set [Bluetooth Mode] to [Receiver] or [Transmitter].
[HDMI Settings] • [Control for HDMI] (page 47) [On]: The Control for HDMI function is enabled. Devices connected with an HDMI cable can control each other. [Off]: Off • [Standby Through] (page 49) This function is available when you set [Control for HDMI] to [On]. [Auto]: Signals are output from the system’s HDMI OUT (ARC) jack when the TV is turned on while the system is not turned on. The system standby power consumption can be reduced more than when set to [On].
• [Time Zone] Select your country/region. Notes • Software update may be performed even if you select [Off] in [Auto Update] depending on the details of the updates. • Software update is performed automatically within 11 days of a new software release. [Network Connection Status] Displays the current network connection status. [Network Connection Diagnostics] You can run the network diagnostic to check if the network connection has been made properly.
[Skip]: The system skips the selected input. Note When you press INPUT +/– during the home menu is displayed, input icon appears dimmed if it has been set to [Skip]. Tip You can perform [Input Skip Setting] from the options menu (page 58). [Easy Setup] Using the Various Functions/Settings Run [Easy Setup] to make the basic initial settings and the basic network settings for the system. Follow the onscreen instructions.
Options Menu List Various settings and playback operations are available by pressing OPTIONS. The available items differ depending on the situation. Item Explanation [A/V SYNC] Adjusts the time gap between picture and sound. Sound output can be delayed (page 30). [Sound Field] Changes the sound field setting (page 27). [Night] Selects the night mode (page 28). [Voice] Selects the voice mode (page 29). [DTS Dialog Control] Adjusts the dialogue volume while streaming the DTS:X contents.
The system turns off when the TV is turned off. Troubleshooting Troubleshooting If you experience any of the following difficulties while using the system, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Be sure to bring both your main unit and subwoofer, even if it seems as though only one has a problem, when you request to repair. Power Check that the AC power cord (mains lead) is connected securely.
Format] to [Standard format] (page 17). If you connect a device supporting HDCP 2.2 be sure to connect the device to the HDMI IN jack and the TV to the HDMI OUT jack of the system. The system is connected to an input device that is not HDCP (Highbandwidth Digital Content Protection) compliant. In this case, check the specifications of the connected device. 3D content from the HDMI IN 1/2/3 jack do not appear on the TV screen. Depending on the TV or video device, 3D content may not appear.
Picture and sound are not output from the TV when the system is not turned on. Set on the system [System Settings] [HDMI Settings] - [Control for HDMI] to [On], and then set [Standby Through] to [Auto] or [On] (page 55). Turn on the system, and then switch the input to that for the device playing. If connected to devices other than those manufactured by Sony that support the Control for HDMI function, set [System Settings] [HDMI Settings] - [Standby Through] to [On] (page 55).
Set [System Settings] - [HDMI Settings] - [HDMI Signal Format] to [Standard format] (page 17). The surround effect cannot be obtained. Depending on the input signal and the sound field setting, surround sound processing may not work effectively. The surround effect may be subtle, depending on the program or disc. To play multi-channel audio, check the digital audio output setting on the device connected to the system.
Set the night mode to [Off]. For details, see “Enjoying Clear Sound with Low Volume at Midnight (NIGHT)” (page 28). Sound skips or has noise. USB Device Connection The USB device is not recognized. Try the following: Turn the system off. Remove and reconnect the USB device. Turn the system on. Make sure that the USB device is securely connected to the (USB) port (page 25). Check to see if the USB device or a cable is damaged. Make sure that the USB device is on.
Remove any obstacle between this system and the BLUETOOTH device or move this system away from the obstacle. Reposition the connected BLUETOOTH device. Switch the wireless LAN frequency of any nearby wireless LAN router or PC to 5 GHz range. Increase the volume on the connected BLUETOOTH device. Headphones Connection via BLUETOOTH BLUETOOTH connection cannot be completed. Make sure that the BLUETOOTH indicator of the main unit is lit (page 8).
Wireless LAN Connection You cannot connect your PC to the Internet after [Wi-Fi Protected Setup™ (WPS)] is performed. The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. The system cannot connect to the network or the network connection is unstable. The wireless LAN router you want is not shown in the wireless network list.
Remote Control The remote control of this system does not function. Point the remote control at the remote control sensor on the main unit (page 8). Remove any obstacles in the path between the remote control and the system. Replace both batteries in the remote control with new ones, if they are weak. Make sure you are pressing the correct button on the remote control. TV remote control does not work. This problem might be solved by enabling the IR repeater function (page 54).
Sensors of the TV do not work properly. The main unit may block some sensors (such as the brightness sensor), the remote control receiver of your TV or the emitter for 3D glasses (infrared transmission) of a 3D TV that supports the infrared 3D glass system, or wireless communication. Move the main unit away from the TV within a range that allow those parts to operate properly. For the locations of the sensors and remote control receiver, refer to the operating instructions supplied with the TV.
Wireless LAN section Additional Information Specifications Bar Speaker (SA-ST5000) Amplifier section POWER OUTPUT (rated) Front L + Front R: 30 W + 30 W (at 6 ohms, 1 kHz, 1% THD) POWER OUTPUT (reference) Front L/Front R speaker blocks: 50 W (per channel at 6 ohms, 1 kHz) Front tweeter L/Front tweeter R speaker blocks: 50 W (per channel at 6 ohms, 10 kHz) Center speaker block: 50 W (per channel at 6 ohms, 1 kHz) Center tweeter speaker block: 50 W (per channel at 6 ohms, 10 kHz) Top speaker block: 50 W (pe
Front L/Front R speaker block section Speaker system 2-way coaxial speaker system, Acoustic suspension Speaker Woofer: 65 mm cone type, Magnetic fluid speaker Tweeter: 14 mm soft dome type Center speaker block section Speaker system Center: 2-way coaxial speaker system, Acoustic suspension Satellite: Full range speaker system, Acoustic suspension Speaker (5 speakers) Center woofer: 65 mm cone type, Magnetic fluid speaker Tweeter: 14 mm soft dome type Satellite: 65 mm cone type, Magnetic fluid speaker Top
Power Consumption by the Setting Value for Each Standby Mode Standby mode Default setting Setting value [Bluetooth Standby] (page 54) [On] [Off] [On]/[Off]1) [On]/[Off]1) [Remote Start] (page 56) [Off] [Off] [On] [On]/[Off]1) [Quick Start/Network Standby] (page 55) [Off] [Off] [Off] [On] Power consumption Less than 2 W Less than 0.5 W Less than 3 W Less than 7 W2) 1) 2) Power consumption is the same for [On] or [Off].
Playable Types of Audio Files Extension MP3 (MPEG-1 Audio Layer III)1) .mp3 AAC/HE-AAC1),2) .m4a, .aac3), .mp4, .3gp WMA9 Standard2) .wma WMA10 Pro4) .wma LPCM1) .wav FLAC2) .flac, .fla Dolby Digital1),3) .ac3 DSF2) .dsf DSDIFF2),5) .dff AIFF2) .aiff, .aif ALAC2) .m4a Vorbis .ogg Monkey’s Audio .
Supported Input Audio Formats Audio formats supported by this system are as follows. Format Function “HDMI1” “HDMI2” “HDMI3” “TV” (ARC) “TV” (OPT) LPCM 2ch LPCM 5.1ch – – LPCM 7.1ch – – Dolby Digital Dolby TrueHD – – Dolby Digital Plus – Dolby Atmos - Dolby TrueHD – – Dolby Atmos - Dolby Digital Plus – DTS DTS-ES Discrete 6.1, DTS-ES Matrix 6.
Supported HDMI Video Formats Video formats supported by this system are as follows. Resolution 4K 4096 × 2160p 3840 × 2160p 4K 4096 × 2160p 3840 × 2160p 1920 × 1080p 1920 × 1080i 3D Color Space – RGB 4:4:4 YCbCr 4:4:4 8 bit – YCbCr 4:2:2 8/10/12 bit – YCbCr 4:2:0 10/12 bit 23.98/24/25/29.97/30 Hz1) – RGB 4:4:4 YCbCr 4:4:4 10/12 bit 50/59.94/60 Hz1) – YCbCr 4:2:0 8 bit – RGB 4:4:4 YCbCr 4:4:4 8 bit – YCbCr 4:2:2 8/10/12 bit 50/59.94/60 Hz1) 23.98/24/25/29.
• This system supports “TRILUMINOS.” • All HDMI IN and HDMI OUT jacks support bandwidth up to 18Gbps, HDCP 2.21), BT.2020 wide color spaces2), and HDR (High Dynamic Range)3) contents passthrough. 1) 2) 3) HDCP 2.2 is newly enhanced copyright protection technology that is used to protect content such as 4K movies. BT.2020 color space is new wider color standard that is defined for ultra-high definition television systems. HDR is an emerging video format that can display a wider range of brightness levels.
On BLUETOOTH Communication If you have any questions or problems concerning your system, please consult your nearest Sony dealer. 75GB Additional Information • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE. This EULA is a legal agreement between you and Sony Corporation (“SONY”).
SOFTWARE. You may not share, distribute, rent, lease, sublicense, assign, transfer or sell the SOFTWARE. The software, network services or other products other than SOFTWARE upon which the SOFTWARE’S performance depends might be interrupted or discontinued at the discretion of the suppliers (software suppliers, service suppliers, or SONY).
control equipment in hazardous environments requiring fail-safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of the SOFTWARE could lead to death, personal injury, or severe physical or environmental damage ("HIGH RISK ACTIVITIES").
OF THEIR AGGREGATE LIABILITY UNDER ANY PROVISION OF THIS EULA SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID FOR THE PRODUCT. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
you fail to comply with any of its terms. In case of such termination, you must cease all use, and destroy any copies, of the SOFTWARE. AMENDMENT SONY RESERVES THE RIGHT TO AMEND ANY OF THE TERMS OF THIS EULA AT ITS SOLE DISCRETION BY POSTING NOTICE ON A SONY DESIGNATED WEB SITE, BY EMAIL NOTIFICATION TO AN EMAIL ADDRESS PROVIDED BY YOU, BY PROVIDING NOTICE AS PART OF THE PROCESS IN WHICH YOU OBTAIN UPGRADES/UPDATES OR BY ANY OTHER LEGALLY RECOGNIZABLE FORM OF NOTICE.
the ventilation holes and cause malfunctions. • Do not place metal objects other than a TV around the system. Wireless functions may be unstable. • If the system is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the system away from the TV, VCR, or tape deck. • Use caution when placing the system on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result.
Copyrights and Trademarks This system incorporates Dolby* Digital and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. **For DTS patents, see http:// patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc.
Wi-Fi CERTIFIED™, WPA™, WPA2™ and WiFi Protected Setup™ are trademarks of WiFi Alliance. LDAC™ and LDAC logo are trademarks of Sony Corporation. LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a Bluetooth connection.
Index A IR-Repeater 54 Audio DRC 53 Audio Output 53 Audio Return Channel (ARC) 48, 55 Audio Settings 52 Auto Home Network Access Permission 56 Auto Standby 55 Auto Update 55 Auto Update Settings 55 M Network 18 Network Connection Diagnostics 56 Network Connection Status 56 Network Settings 56 NFC 32 B O Bluetooth Codec - AAC 54 Bluetooth Codec - LDAC 54 Bluetooth Mode 53 Bluetooth Settings 53 Bluetooth Standby 46, 54 BT.
U Update 52 V Video Direct 52 W Wireless Playback Quality 54 Wireless Subwoofer Connection 54 Y YCbCr/RGB (HDMI) 52 85GB
警告 切勿將本設備安裝在狹窄的空間內,如書 櫃或壁櫥內。 為了降低發生火災的危險,請勿使用報 紙、桌布、窗簾等物品蓋住設備的通風 孔。 請勿將如點燃的蠟燭等明火源放置於設備 上。 低功率射頻電機之使用不得影響飛航安全 及干擾合法通信;經發現有干擾現象時, 應立即停用,並改善至無干擾時方得繼續 使用。前項合法通信,指依電信法規定作 業之無線電通信。低功率射頻電機須忍受 合法通信或工業、科學及醫療用電波輻射 性電機設備之干擾。 在5.25-5.
設備名稱:主動式揚聲器組合,型號 (型式):HT-ST5000 限用物質及其化學符號 單元 鉛 (Pb) 汞 (Hg) 鎘 (Cd) 六價鉻 (Cr+6) 多溴聯苯 (PBB) 多溴二苯醚 (PBDE) 電路板 - ○ ○ ○ ○ ○ 外殼 - ○ ○ ○ ○ ○ 揚聲器 - ○ ○ ○ ○ ○ 配件 (遙 控器等) - ○ ○ ○ ○ ○ 備考1.“超出0.1 wt %”及“超出0.01 wt %”係指限用物質之百分比含量超出百分比 含量基準值。 備考2.“○”係指該項限用物質之百分比含量未超出百分比含量基準值。 備考3.
目錄 盒中內容 ...................... 5 系統的功能 .................... 6 部件與控制器的指南 ............ 8 關於主選單 ................... 13 設置 基本設置 入⾨指南 (另外的文件) 連接4K電視機和4K裝置 ......... 15 透過ANALOG IN插孔連接電視機或可攜 式音訊裝置 ............... 17 連線至有線網路 ............... 18 連線至無線網路 ............... 19 將主機安裝到牆上 ............. 20 安裝網格 ..................... 22 聆聽聲音 聆聽電視 ..................... 23 聆聽連接的AV裝置 ............. 23 聆聽USB裝置上的音樂 .......... 24 選擇音效 設定針對音源的音效(SOUND FIELD) .......................... 25 深夜時以低音量欣賞清晰的聲音 (NIGHT) ................
盒中內容 • HDMI連接線 (支援規格等同支援乙太網 路連接的特級高速HDMI傳輸線)(1) • 主動式揚聲器系統 (1) • 壁掛式安裝模板 (1) • 網格 (1) • 主動式重低音揚聲器 (1) • 遙控器 (1) • 入⾨指南 • 使用說明書 • R03 (AAA大小)電池 (2) 5CT
系統的功能 “聆聽電視” (第23頁) “聆聽連接的AV裝置” (第23頁) Blu-ray Disc™播放器、有線 電視盒或衛星電視盒等 連接電視機和其他裝置 (請參閱“入門指南” (另外的文件)或參 閱“透過ANALOG IN插孔連接電視機或可攜 式音訊裝置” (第17頁)。) “使用HDMI控制功能” (第42頁) “使用“BRAVIA”同步功能” (第43頁) “使用Spotify” (第34頁) * “使用MUSIC SERVICE按鈕” (第35頁) * 某些國家/地區可能不提供此服務。 * 若要在系統上播放,您需要Spotify Premium帳 號。 “執行主動式重低音揚聲器的 無線連接 (SECURE LINK)” (第38頁) 6CT “聆聽USB裝置上的音樂” (第24頁)
“連線至有線網路” (第18頁) 數據機 路由器 網際網路 “連線至無線網路” (第19頁) 無線LAN路由器 “透過家庭網路聆聽PC上的音樂” (第32頁) “聆聽行動裝置中的音樂” (第28頁) “使用Sony | Music Center聆聽行動裝置 上的音樂” (第33頁) “從耳機聆聽所連接電視機或裝置的聲音” (第30頁) “在不同的房間內聆聽相同的音樂 (無線連 接多個房間)” (第36頁) 7CT
部件與控制器的指南 插圖省略細節。 主動式揚聲器系統 (主機) 正面 (電源)按鈕 開啟系統或設至待機模式。 (輸入選擇)按鈕 (第13、23 頁) BLUETOOTH PAIRING按鈕 (第28頁) (MUSIC SERVICE)按鈕 (第35 頁) +/- (音量)按鈕 (USB)連接埠 (第24頁) N標記 (第29頁) 使用NFC功能時,請將NFC相容裝置觸 碰該標記。 8CT 遙控器感應器 將遙控器指向遙控器感應器以操作系 統。 前顯示面板 BLUETOOTH指示燈 – 快速閃爍藍燈:配對待機狀態時 – 閃爍藍燈:正在嘗試BLUETOOTH連線 – 亮起藍燈:已建立BLUETOOTH連線
背面 ANALOG IN插孔 TV IN (OPT)插孔 HDMI OUT (TV (ARC))插孔 關於連接的規格和注意事項,請參 閱“支援的HDMI視訊格式” (第64 頁)。 HDMI IN 3插孔 關於連接的規格和注意事項,請參 閱“支援的HDMI視訊格式” (第64 頁)。 LAN(100)連接埠 HDMI IN 1插孔 關於連接的規格和注意事項,請參 閱“支援的HDMI視訊格式” (第64 頁)。 HDMI IN 2插孔 關於連接的規格和注意事項,請參 閱“支援的HDMI視訊格式” (第64 頁)。 9CT
主動式重低音揚聲器 開/待機指示燈 – 亮起紅燈:主動式重低音揚聲器沒 有連接系統 – 亮起綠燈:主動式重低音揚聲器連 接系統 – 亮起橘燈:主動式重低音揚聲器已 透過Secure Link功能連接系統 – 閃爍綠燈:主動式重低音揚聲器正 在嘗試連接系統 – 閃爍橘燈:主動式重低音揚聲器正 在嘗試透過Secure Link功能連接系 統 – 熄滅: 主動式重低音揚聲器處於待 機模式 / (開/待機)按鈕 開啟主動式重低音揚聲器或設至待 機模式。 SECURE LINK按鈕 (第38頁) 通風孔 為了安全起見,請勿堵塞通風孔。 僅適用於台灣 鐵氧體磁芯配備主動式重低音揚聲 器的交流電源線,目的是抑制EMC, 請勿移除。 10CT
遙控器 INPUT +/- (第13、23頁) (電源) 開啟系統或設至待機模式。 DISPLAY** 在電視機螢幕上顯示播放資訊。 電視輸入不會顯示播放資訊。 CLEAR AUDIO+ (第25頁) SOUND FIELD (第25頁) VOICE (第26頁) NIGHT (第26頁) DIMMER (第40頁) 色彩按鈕 用於選取某些選單項目的快速鍵。 MUSIC SERVICE (第35頁) BLUETOOTH PAIRING (第28頁) OPTIONS** (第27、51頁) 在電視機螢幕上顯示選項選單。 電視輸入不會顯示選項選單。 BACK (第13頁) /// (第13頁) (輸入)(第13頁) HOME (第13頁) (靜音) 暫時關閉聲音。 (音量)+*/調節音量。 SW (主動式重低音揚聲器音 量)+/調整主動式重低音揚聲器音量。 11CT
播放操作按鈕 / (倒轉/快轉) 向後或向前搜尋。 / (上一個/下一個) 選擇上一/下一章節、曲目或檔案。 (播放) * 開始或重新開始播放 (繼續播 放)。 (暫停) 暫停或重新開始播放。 (停止) 停止播放。 BLUETOOTH RX/TX (BLUETOOTH接收 器/傳輸器)(第31頁) AUDIO* (第39頁) * AUDIO、 和 + 按鈕有觸覺點。操作 時,可將其作為參考點。 **觀賞HDR訊號與某些4K格式的視訊時, OPTIONS與DISPLAY按鈕沒有作用,而且不 顯示系統的螢幕顯示 (OSD)。 如需關於4K 視訊格式的詳細資訊,請參閱“支援的 HDMI視訊格式” (第64頁)。 12CT
關於主選單 您可以使用HDMI連接線 (附帶)連接本系統和電視機,以便在電視機螢幕上顯示主選 單。從主選單中,您可以透過選擇 [設置]設定各種設定,或是從輸入清單中選擇 您要觀看的輸入或服務。主選單以[簡易設置]中選取的語言顯示。(以下畫面為選擇英 文時的範例。) [設置] 輸入清單 使用主選單 ///, (輸入) HOME BACK 1 按HOME。 主選單出現在電視機螢幕上。 2 按 /// 選擇 [設置]或輸入清單上的項目,然後按 。 所選輸入或設定顯示出現在電視機螢幕上。 要返回上一個畫面,按BACK。 13CT
輸入清單 輸入名稱 解說 [TV] 輸出電視機的聲音。(第23頁) [HDMI1] 輸出連接至HDMI IN 1插孔的裝置的聲音。(第23頁) [HDMI2] 輸出連接至HDMI IN 2插孔的裝置的聲音。(第23頁) [HDMI3] 輸出連接至HDMI IN 3插孔的裝置的聲音。(第23頁) [Bluetooth Audio] 輸出以BLUETOOTH功能連接的裝置的聲音。(第28頁) [Analog] 輸出連接至ANALOG IN插孔的裝置的聲音。(第23頁) [USB] 輸出在連接的USB裝置上儲存的音樂檔案。(第24頁) [Home Network] 輸出透過網路連接的裝置上的音樂檔案。(第32頁) [Music Service List] 顯示音樂服務的操作方法。(第35頁) [設置] 請參閱“使用設定顯示” (第45頁)。 提示 您也可以重複按INPUT +/- 選擇輸入。 關於步驟說明 在本使用說明書中,以透過HDMI連接線 (附帶)連接本系統和電視機時使用遙控器在電 視機螢幕上顯示的主選單上操作的步驟描述操作。 透過以下方式簡化使用 /// 和
當電視機上的HDCP2.2相容HDMI 插孔標示“ARC”時 基本設置 請參閱入⾨指南 (另外的文件)。 連接4K電視機和4K裝置 系統上的所有HDMI插孔都支援4K視訊格式 和HDCP2.2 (高頻寬數位內容防護系統修 訂版2.2)。 若要觀看4K視訊內容,請透過各裝置上 HDCP2.2相容的HDMI插孔將4K電視機和4K 裝置連接到系統。 您只能透過HDCP2.2相容的HDMI插孔連線 檢視4K視訊內容。 HDCP2.2相容的 HDMI插孔 HDCP2.2相容的 HDMI插孔 電視機 Blu-ray Disc播放 器、有線電視盒或 衛星電視盒等 HDMI連接線 (附帶) HDMI連接線 (無附帶) 使用支援您要觀看的4K視訊格式的HDMI連接 線。詳情請參閱“支援的HDMI視訊格式” (第64頁)。 1 檢查電視機上的哪一個HDMI IN插孔與 HDCP2.
2 3 透過HDMI連接線 (附帶)連接電視機 上的HDCP2.2相容HDMI IN插孔與主機 上的HDMI OUT插孔。 電視機連接完成。 透過HDMI連接線 (無附帶)連接4K裝 置的HDCP2.2相容HDMI OUT插孔與主機 的HDMI IN插孔。 請參閱4K裝置的使用說明書,確定4K 裝置的HDMI OUT插孔與HDCP2.2相容。 4K裝置連接完成。 當電視機上的HDCP2.2相容HDMI 插孔未標示“ARC”時 如果電視機的HDCP2.2相容HDMI IN插孔與 ARC (Audio Return Channel)不相容, 系統無法輸出電視機的聲音。 在此情況下,請透過光纖數位線 (無附 帶)連接電視機的光纖輸出插孔與主機上 的TV IN (OPT)插孔。 HDCP2.2相容的 HDMI插孔 電視機 HDCP2.
若要觀看4K視訊內容,請選擇適合所連接 4K電視機和4K裝置的設定。 1 2 3 4 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 選擇[系統設定] - [HDMI設定] [HDMI訊號格式]。 透過ANALOG IN插孔連 接電視機或可攜式音訊 裝置 若要將以下裝置連接系統,請透過系統上 的ANALOG IN插孔連接。 – 沒有HDMI插孔和光纖數位輸出插孔的電 視機 – 智慧型手機、WALKMAN®等可攜式音訊裝 置 選擇您想要的設定。 • [標準格式] (預設設定):連接的 電視機和裝置支援標準頻寬視訊格 式時,選擇此項。 • [增強格式]:連接的電視機和裝置 都支援4K 60p 4:4:4等高頻寬視訊 格式時,選擇此項。 關於[HDMI訊號格式]設定選項、支援 的視訊格式訊號和要使用的HDMI連接 線的關係,請參閱“支援的HDMI視訊 格式” (第64頁)。 類比音訊連接線 (無附帶) 註 • 視電視機而定,可能需要HDMI輸出的電視設 定。請參閱電視機的使用說明書。 • 當[HDMI訊號格式]設定為[增強格式]後,如 果沒有顯示畫面
透過自動取得網路資訊連接 連線至有線網路 使用LAN連接線將系統和PC連接至家庭網 路以準備好網路。 1 2 使用LAN連接線連接至PC或路由 器 3 下圖說明將系統和PC連接至家庭網路的範 例。 4 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 選擇[網路設定] - [網際網路設定] [有線設置]。 選擇[自動]。 系統啟動網路設定,並且出現網路設 定狀態。 按 / 瀏覽資訊,然後按 。 5 網際網路 選擇[儲存並連線]。 系統開始與網路連線。詳情請參閱電 視機螢幕上顯示的訊息。 使用固定的IP位址連接 數據機 1 LAN連接線 (無附帶) 2 路由器 3 4 5 伺服器 註 伺服器需連線到與系統相同的網路。 提示 建議您使用屏蔽直連型介面連接線 (無附 帶)。 18CT 6 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 選擇[網路設定] - [網際網路設定] [有線設置]。 選擇[手動]。 按照螢幕上的指示執行設定。 系統啟動網路設定,並且出現網路設
將系統和PC連接至無線LAN路由器以準備 好網路。 註 伺服器需連線到與系統相同的網路。 透過選擇網路名稱 (SSID)連 接 如果您的無線LAN路由器 (存取點)與 Wi-Fi保護設置 (WPS)不相容,請事先確 認下列資訊。 – 網路名稱 (SSID) * ___________________________________ 使用WPS按鈕連接 – 安全性金鑰 (密碼) ** ___________________________________ 當您的無線LAN路由器 (存取點)與Wi-Fi 保護設置 (WPS)相容時,您可使用WPS按 鈕輕鬆設定網路設定。 * SSID (服務集標識符)是用來標識特定存 取點的名稱。 1 **此資訊可從無線LAN路由器/存取點的標籤、 使用說明書中、設定無線網路的人員或您 網際網路服務供應商提供的資訊中取得。 2 3 4 5 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 選擇[網路設定] - [網際網路設定] [無線設置] - [Wi-Fi保護設置™ (WPS)]。 1 2 3 選擇[開始
透過Sony | Music Center連接 Sony | Music Center可將系統連線到與行 動裝置相同的無線網路。詳情請依照應用 程式的指示或參閱以下URL。 http://www.sony.
關於主機的安裝位置 1 準備適合主機背面壁掛孔的螺絲 (無 附帶)。 (A) 4 mm 超過30 mm 4.
3 在壁掛式安裝模板的螺絲線 ()上 標示下述螺絲位置。 用尺測量下述距離,然後用鉛筆等標 示。 422 mm 422 mm 安裝網格 您可以透過安裝隨附的網格保護揚聲器。 如果您要聆聽高解析度音訊,建議您使用 主機而不安裝網格。 與前面板平行安裝網格。 將網格的突出部分插入主機上的孔。 螺絲位置 4 在標示位置鎖緊螺絲。 11 mm至 12 mm 5 6 取下壁掛式安裝模板。 將主機掛在螺絲上。 將主機背面孔對齊螺絲,然後將主機 掛在兩個螺絲上。 註 黏貼壁掛式安裝模板時,將它完全撫平。 22CT 提示 網格以磁鐵固定。
聆聽聲音 聆聽連接的AV裝置 1 1 2 2 3 4 按HOME。 主選單出現在電視機螢幕上。 選擇主選單上的[TV]。 使用電視機遙控器選擇節目。 所選電視節目出現在電視機螢幕上, 電視聲音從系統輸出。 調節音量。 • 按下遙控器上的 +/- 調節音量。 • 按下遙控器上的SW +/- 調節主 動式重低音揚聲器音量 (第27 頁)。 3 按HOME。 主選單出現在電視機螢幕上。 在主選單上選擇連接所需裝置的輸 入。 所選裝置的影像出現在電視機螢幕 上,聲音從系統輸出。 如果選擇[Analog],電視機螢幕上會 顯示[Analog]畫面。 調節音量。 • 按下遙控器上的 +/- 調節音量。 • 按下遙控器上的SW +/- 調節主 動式重低音揚聲器音量 (第27 頁)。 提示 按下遙控器上的INPUT +/- 可以選擇輸入。 註 將電視機 (BRAVIA)的揚聲器設定設為音訊 系統。請參閱電視機的使用說明書中有關如 何設定電視機的資訊。 提示 按下遙控器上的INPUT +/- 可以選擇[TV]。 變更主選單上顯示的輸入名稱 您可以變更主選單上顯示的[HDMI1]、 [H
提示 變更輸入名稱時,顯示的圖示也會自動改 變。 聆聽USB裝置上的音樂 您可播放在連接的USB裝置上儲存的音樂 檔案。 有關可播放檔案的類型,請參閱“可以播 放的音頻檔案類型” (第62頁)。 1 2 3 4 5 將USB裝置連接至 (USB)連接埠。 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [USB (已連接)]。 選擇儲存歌曲的資料夾 - 歌曲。 播放所選歌曲,聲音從系統輸出。 調節音量。 • 按下遙控器上的 +/- 調節音量。 • 按下遙控器上的SW +/- 調節主 動式重低音揚聲器音量 (第27 頁)。 註 操作時請勿拔下USB裝置。為了避免破壞數據 或損壞USB裝置,請在連接或拔下USB裝置前 關閉系統。 提示 您也可以從選項選單執行各種操作 (第51 頁)。 24CT
選擇音效 設定針對音源的音效 (SOUND FIELD) SOUND FIELD CLEAR AUDIO+ 解說 [Sports] 您會體驗到有如在體 育場中觀賞活動的氣 氛。 但是仍然生動呈 現評論者的旁白。 [Standard] 可以清楚聽到電視節 目的聲音。 這個模式 適合觀賞新聞節目, 因為聲音清晰。 註 • 使用無線連接多個房間功能或Chromecast built-in,或是將[Bluetooth模式]設定為 [傳送] (第47頁)時,音場功能不可用。 • 音場選單不會出現在電視輸入的電視機螢幕 上。 • 將[聲音效果]設定為[關]時,音場功能停 用。 • 當選擇[Music]之外的音場時,虛擬環繞功 能正在處理;但是音訊來源不是多聲道時, 這項功能可能沒有作用。 提示 1 2 按SOUND FIELD。 音場選單出現在電視機螢幕上。 • 按下遙控器上的CLEAR AUDIO+可以選擇 [ClearAudio+]。 • 您可以從選項選單選擇音場 (第51頁)。 重複按下按鈕選擇所需的音場。 音場 解說 [ClearAudio+] 根據音源自動選擇適 合的聲音設定。
深夜時以低音量欣賞清 讓對話更清楚 晰的聲音 (NIGHT) (VOICE) 在失真度最低且對話清晰的狀況下以低音 量輸出聲音。 VOICE NIGHT 1 1 2 按NIGHT。 夜間模式出現在電視機螢幕上。 2 按VOICE。 語音模式出現在電視機螢幕上。 重複按下按鈕選擇語音模式。 重複按下按鈕選擇夜間模式。 模式 解說 [開] 啟動夜間模式功能。 [關] 停用夜間模式功能。 註 關閉系統時,此設定會自動設為[關]。 提示 您可以從選項選單中選擇[Night] (第51 頁)。 26CT 模式 解說 [Up Off] 標準 [Up 1] 增強對話音域,因此容 易聆聽對話。 [Up 2] 增強對話音域,使老人 容易聽到對話聲音。 提示 您可以從選項選單中選擇[Voice] (第51 頁)。
調整主動式重低音揚聲 器音量 調整圖像與聲音之間的 延遲 主動式重低音揚聲器專為播放低音或低頻 聲音而設計。 當聲音對不上電視機螢幕上的圖像時,您 可以調整圖像和聲音之間的延遲時間。 設定方式會視輸入而不同。 選擇音效 ///、 SW +/- OPTIONS 按SW (主動式重低音揚聲器音量) +/- 調整主動式重低音揚聲器音量。 觀賞電視時 註 當輸入來源未含有太多低音時,例如電視節 目,可能會難以聽見主動式重低音揚聲器的 低音。 1 按OPTIONS。 “SYNC”出現在前顯示面板中。 2 按 或 。 調節時間出現在前顯示面板中。 3 使用 / 調整延遲,然後按 。 您可以使用25毫秒增幅在0毫秒至 300毫秒之間調整。 4 按OPTIONS。 在前顯示面板中的選項選單關閉。 觀賞另一個裝置時 1 2 3 按OPTIONS。 選項選單出現在電視機螢幕上。 選擇[影音同步]。 使用 / 調整延遲,然後按 。 您可以使用25毫秒增幅在0毫秒至 300毫秒之間調整。 27CT
透過與行動裝置配對聆聽音樂 透過BLUETOOTH®功能聆聽音樂/ 聲音 1 聆聽行動裝置中的音 樂 按BLUETOOTH PAIRING。 系統進入配對模式,“BT”出現在前 顯示面板中,且BLUETOOTH指示燈快 速閃爍。 使用BLUETOOTH功能連接系統與行動裝置, 可以透過無線連接聆聽儲存在智慧型手機 或平板電腦等行動裝置上的音樂。 透過BLUETOOTH功能連接行動裝置時,只 要使用附帶的遙控器就能操作,不需開啟 電視。 INPUT +/- BLUETOOTH PAIRING SW +/HOME +/- 播放操作按鈕 BLUETOOTH RX/TX 2 3 4 5 開啟BLUETOOTH功能,然後在行動裝 置上搜尋“HT-ST5000”後選擇該型 號。 如需密碼,請輸入“0000”。 確定主機上的BLUETOOTH指示燈亮起 藍燈。 系統與行動裝置之間的連線已建立。 使用所連線行動裝置上的音樂應用程 式開始播放音訊。 聲音從主機輸出。 調節音量。 • 按下遙控器上的 +/- 調節音量。 • 按下遙控器上的SW +/- 調節主 動式重低音揚聲器音量 (第27 頁
提示 • 建立BLUETOOTH連線後,系統會根據您連線 的裝置顯示可安裝應用程式的建議。 遵照出現的指示可安裝Sony | Music Center應用程式,以便操作本系統。 有關Sony | Music Center的詳細資料,請 參閱“使用Sony | Music Center聆聽行動 裝置上的音樂” (第33頁)。 • 為第二個和之後的行動裝置執行配對。 1 2 3 4 5 開啟行動裝置的BLUETOOTH功能。 重複按INPUT +/-,使前顯示面板中顯 示“BT”。 系統會自動重新連接最近連線的行動 裝置。 將NFC相容的智慧型手機或平板電腦等行 動裝置拿到主機上的N標記旁,系統會自 動開啟,然後自動執行配對與BLUETOOTH 連線。 相容的裝置 內建NFC功能的智慧型手機、平板電腦與音 樂播放器 (作業系統:Android™ 2.3.3或 更新版本,Android 3.
5 調節音量。 • 按下遙控器上的 +/- 調節音量。 • 按下遙控器上的SW +/- 調節主 動式重低音揚聲器音量 (第27 頁)。 • 您可以使用遙控器上的播放操作按 鈕播放或暫停內容。 從耳機聆聽所連接電視 機或裝置的聲音 您可以透過BLUETOOTH功能連接電視機或 裝置,從BLUETOOTH相容的耳機聆聽所連 接電視機或裝置的聲音。 以觸控功能停止播放 再次將行動裝置觸碰主機上的N標記。 註 • 視您的裝置而定,您可能需要預先在您的行 動裝置上執行下列項目。 – 開啓NFC功能。 – 從Google Play™安裝“NFC快速連線”應 用程式,並啟動應用程式。(某些國家/ 地區可能不提供此應用程式。)詳情請參 閱您裝置的使用說明書。 • 此功能不適用於BLUETOOTH相容的耳機。若 要使用BLUETOOTH相容的耳機聆聽聲音,請 參閱“從耳機聆聽所連接電視機或裝置的聲 音” (第30頁)。 • 使用觸控功能進行BLUETOOTH連接時, [Bluetooth模式]會自動變更為[接收]。即 使取消觸控功能,[Bluetooth模式]設定仍 維持為[接收]。有關[Bluetooth模式
若要從裝置清單中移除已註冊的裝置 1 依照“透過與耳機配對聆聽聲音”中的 步驟1到5操作。 2 3 4 選擇耳機的名稱,然後按OPTIONS。 選擇[移除]。 依照畫面上的指示將所需的耳機從裝置 清單中刪除。 1 2 3 4 5 按HOME。 主選單出現在電視機螢幕上。 選擇所需的輸入。 有關選擇輸入,請參閱 “使用主選單” (第13頁)。 將耳機的BLUETOOTH功能設為開啟。 按下遙控器上的BLUETOOTH RX/TX。 [Bluetooth模式]設為[傳送],且 “BT TX”出現在前顯示面板中。 系統自動重新連接至最近連線的耳 機,然後聲音從耳機輸出。 系統不會輸出聲音。 • 視BLUETOOTH相容的耳機而定,可能無法 調整音量。 • 將[Bluetooth模式]設定為[關]或[傳送] 時,[Bluetooth Audio]會停用。 • 選擇[Bluetooth Audio]的輸入時,您無 法將[Bluetooth模式]設為[傳送]。您也 無法使用遙控器上的BLUETOOTH RX/TX進 行切換。 • 您最多可以註冊9個BLUETOOTH裝置。如 果註冊第10個BLUETOOT
1 使用網路功能聆聽音樂/聲音 透過家庭網路聆聽PC上 的音樂 您可以透過家庭網路播放儲存在PC上的音 樂檔案。 透過操作電視機螢幕上顯示的選單或是智 慧型手機或平板電腦等行動裝置的Sony | Music Center,可以播放音樂檔案。 準備Home Network 2 3 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇[Home Network]。 您的家庭網路上的裝置名稱出現在電 視機螢幕上。 選擇所需的裝置-儲存歌曲的資料 夾-歌曲。 播放所選歌曲,聲音從系統輸出。 4 調節音量。 • 按下遙控器上的 +/- 調節音量。 • 按下遙控器上的SW +/- 調節主 動式重低音揚聲器音量 (第27 頁)。 提示 1 2 3 將系統與網路連接。 請參閱“連線至有線網路” (第18 頁)和“連線至無線網路” (第19 頁)。 將PC與網路連接。 詳情請參閱PC的使用說明書。 設定PC。 若要在家庭網路上使用PC,您需要將 PC設為伺服器。詳情請參閱PC的使用 說明書。 您也可以從選項選單執行各種操作 (第51 頁)。 使用Sony | Music Center聆聽 P
使用Sony | Music Center聆聽行動裝置上 的音樂 Sony | Music Center的功能 Sony | Music Center是使用智慧型手機或 平板電腦等行動裝置控制相容Sony音訊裝 置的應用程式。 1 2 3 4 將免費的Sony | Music Center應用程 式安裝到行動裝置。 在Google Play或App Store搜尋Sony | Music Center並安裝到您的行動裝 置。 透過BLUETOOTH功能 (第28頁)或網 路功能 (第18頁),將系統和行動裝 置連接。 啟動Sony | Music Center。 依照Sony | Music Center畫面操作。 註 將Sony | Music Center安裝到行動裝置上 可提供以下功能。 • 使用Sony | Music Center前,務必將 [Bluetooth模式]設為[接收] (第47頁)。 • 使用最新版本的Sony | Music Center。 系統的聲音設定 提示 您可輕鬆自訂聲音,或是使用Sony建議的 [ClearAudio+]設定。 • 您可以使用NFC功能將系
使用Chromecast built-in Chromecast built-in可讓您從具備 Chromecast功能的應用程式中選擇音樂內 容,並在系統或包含系統的群組上播放。 1 2 3 4 5 6 按HOME。 主選單出現在電視機螢幕上。 選擇主選單上的[Music Service List]。 音樂服務清單出現在電視機螢幕上。 選擇[Chromecast built-in]。 依照畫面訊息在系統上執行使用 Chromecast built-in的設定。 執行設定後,[快速啟動/網路待機] 會自動設定為[開],如此即使系統處 於待機模式,您也能快速播放音樂 (第48頁)。 使用Spotify 您可以在Spotify應用程式上選擇音樂, 並在系統上播放。若要在系統上播放,您 需要Spotify Premium帳號。 啟用“Spotify Connect”功能 1 2 3 4 5 透過Wi-Fi將行動裝置連線到與系統 相同的網路。 透過Wi-Fi將行動裝置連線到與系統 相同的網路。 將Spotify應用程式安裝到行動裝置。 啟動Spotify應用程式並登入Spotify Premium帳號
註 某些國家/地區可能不提供Spotify應用程 式。 使用MUSIC SERVICE按 鈕 若要欣賞音樂服務,本系統必須與網際網 路連線。 MUSIC SERVICE 註 • 某些國家/地區可能不提供音樂服務。 • 如果無法繼續播放,會播放系統上次播放的 播放清單。 • 若要在系統上播放,您需要Spotify Premium帳號。 提示 • 按下OPTIONS並在音樂服務清單上選擇[更新 服務],可以更新音樂服務清單。 • 選擇主選單上的[Music Service List]或按 下主機上的MUSIC SERVICE可以顯示音樂服 務清單。 35CT 使用網路功能聆聽音樂/聲音 按MUSIC SERVICE。 音樂服務清單出現在電視機螢幕上。 當您已在系統上播放Spotify的音樂時, 會繼續播放使用Spotify播放的音樂。請 參閱“使用Spotify” (第34頁)。
連接無線連接多個房間 的相容裝置 (無線連 接多個房間) 將系統與無線連接多個房間的相容無線揚 聲器一起使用,就能在任何房間內聆聽音 樂。 在不同的房間內聆聽相同的音 樂 (無線連接多個房間) 您可以使用家用無線網路在不同的房間內 以高音質欣賞以下音樂或聲音。 • 音樂服務上的音樂 • 儲存在PC或智慧型手機中的音樂 • 系統的[TV]、[HDMI1]、[HDMI2] 、 [HDMI3] 或[Analog]輸入的聲音* * 您可欣賞系統所連接裝置的聲音。系統的 聲音比畫面慢,因為要與其他揚聲器的聲 音同步。如果聲音與畫面之間的時間差會 困擾您,請按OPTIONS,將[Multi-room群 組同步]設定為[關]。(對於電視輸入,請 按OPTIONS與/直到“M.
[測試音] 使用各種功能/設定 自訂環繞聲的揚聲器 設定 為獲得良好的環繞音效,請設定揚聲器和 您聆聽位置之間的距離,以及它們的輸出 音量等。 預設設定下被劃線。 1 3 4 [天花板高度] 設定安裝系統的房間天花板高度。 值可以設定在1公尺到5公尺 (以0.1 m為 單位)。 提示 按色彩按鈕 (RED)可以改變測量單位 (英 尺或公尺)。 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 使用各種功能/設定 2 按HOME。 主選單出現在電視機螢幕上。 揚聲器發出測試音調以便檢查可用的揚聲 器。 [關]:揚聲器不發出測試音調。 [開]:每個揚聲器按順序發出測試音調。 選擇[音訊設定] - [揚聲器設定]。 [揚聲器設定]畫面出現在電視機螢幕 上。 執行揚聲器設定。 透過按下 / 和 從以下項目選 擇設定項目,然後按下 / 和 根據環境設定值。 [距離] 設定聆聽位置到揚聲器的距離。 值可以設定在0公尺到10公尺 (以0.
執行主動式重低音揚聲 器的無線連接 (SECURE LINK) 您可以使用Secure Link功能指定連結系 統與主動式重低音揚聲器的無線連接。此 功能有助於防止您使用多種無線產品或您 的鄰居使用無線產品時的干擾情況。 5 6 7 SECURE LINK 按主動式重低音揚聲器背面的SECURE LINK。 主動式重低音揚聲器的開/待機指示 燈閃爍橘燈。 在1分鐘內繼續下一步驟。 選擇[開始]。 連結設定啟動。 要返回之前的顯示,選擇[取消]。 依照畫面訊息完成連結設定。 主動式重低音揚聲器的開/待機指示 燈亮起橘燈。 註 開/待機指示燈 • 如果出現[無法設定Secure Link。]訊息, 請依照畫面上的指示操作。 • 當[Bluetooth模式]設為[傳送]且BLUETOOTH 裝置連接至系統時,無法建立無線主動式重 低音揚聲器連接。 如果無線傳輸不穩定 如果您使用多個無線系統,例如無線LAN, 則無線訊號可能不穩定。在此情況下,更 改下列[射頻頻道]設定或許可以改善傳 送。 1 2 1 2 3 4 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [設置]。 設定顯示出現在
以提升到接近高解析度 欣賞多路廣播聲音 的音質播放壓縮音訊檔 (AUDIO) 案或CD (DSEE HX) 當系統接收Dolby Digital多路廣播訊號 DSEE HX將現有的音源提升到接近高解析 度的音質,使您彷彿身處錄音室或音樂 會。 1 2 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 選擇[音訊設定] - [DSEE HX]。 選擇[開]。 註 • 只有選擇[ClearAudio+]或[Music]做為音場 (第25頁)時,才能使用本功能。 • 此功能相容於取樣頻率44.
停用主機的按鈕 您可以停用主機的按鈕,以避免誤操作, 例如孩童搗蛋 (兒童鎖功能)。 變更前顯示面板與 BLUETOOTH指示燈的亮 度 (DIMMER) 您可以變更前顯示面板與BLUETOOTH指示 燈的亮度。 DIMMER 按住主機的 ,並依序按下 -、 + 和 -。 “LOCK”出現在前顯示面板中,主機的按 鈕無效。 您只能使用遙控器操作本系統。 取消兒童鎖功能 按住主機的 ,並依序按下 -、 + 和 -。 “UNLCK”出現在前顯示面板中,兒童鎖 功能取消。 1 2 按DIMMER。 顯示模式出現在前顯示面板中。 重複按下按鈕選擇所需的顯示模式。 模式 解說 “Bright” 前顯示面板和 BLUETOOTH指示燈亮起 強光。 “Dark” 前顯示面板和 BLUETOOTH指示燈亮起 微光。 “Off” 前顯示面板關閉。 註 兒童鎖功能不會鎖住 (電源)。 註 選取“Off”時,前顯示面板關閉。當您按下 任何按鈕時會自動開啟,如果約10秒未操作 系統,將再次關閉。但在某些情況下,前顯 示面板可能不會關閉。在此情況下,前顯示 面板的亮度與“Dark”相同。 40C
待機模式中省電 確認您進行了以下設定: – [Bluetooth待機]設為[關] (第47 頁)。 – [待機直通]設為[關] (第48頁)。 – [快速啟動/網路待機]設為[關] (第48 頁)。 – [遙控啟動]設為[關] (第49頁)。 透過主機將遠端訊號傳 送到電視機 當主機擋到電視機的遙控器感應器時,電 視機遙控器可能會無法使用。在此狀況 下,請啟用系統上的IR Repeater功能。 從主機背面傳送遠端訊號,可以使用電視 機的遙控器控制電視機。 1 2 4 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 選擇[系統設定] - [IR-Repeater]。 [IR-Repeater]畫面出現在電視機螢 幕上。 選擇[開]。 註 • 請務必確定電視機的遙控器無法控制電視 機,再將[IR-Repeater]設為[開]。如果該 設定在遙控器可控制電視機時設為[開],則 因為遙控器的直接命令與透過主機發出的命 令之間有干擾,因此無法適當操作。 • 在某些電視機上,此功能可能無法正確運 作。在此情況下,請將主機稍微遠離電視 機。 41CT 使用各種功能/設定 3 按HOME。 主
使用HDMI控制功能 透過HDMI連接線連接與HDMI控制功能*相 容的電視機或Blu-ray Disc播放器等裝 置,可讓您使用電視機遙控器輕鬆操作裝 置。 以下功能可以與HDMI控制功能一起使用。 • • • • • • 系統關閉功能 系統聲音控制功能 Audio Return Channel 觸控播放功能 透過電視機遙控器進行選單操作 HDMI待機直通省電設定 註 這些功能可能適用於非Sony製造的裝置,但 不保證能正常運作。 * HDMI控制是CEC (Consumer Electronics Control)用於讓HDMI (高解析度多媒體介 面)裝置互相控制的標準。 系統聲音控制功能 若您在觀賞電視時開啟系統,則電視機的 聲音會從系統的揚聲器輸出。可以使用電 視機遙控器調整系統音量。 若您在上次觀賞電視時,電視機的聲音是 從系統的揚聲器輸出,則重新開啟電視機 時,系統也會自動開啟。 也可以使用電視機選單進行操作。詳情請 參閱電視機的使用說明書。 註 • 使用電視機的雙重畫面功能時,如果選取的 不是[TV]、[HDMI1]、[HDMI2]或[HDMI3]輸 入,只會從電視機輸出聲音。當您停
註 • 如果系統上的[系統設定] - [HDMI設定] [待機直通]設為[開]或[自動],而且您上次 觀賞電視時電視機的聲音從電視機的揚聲器 輸出,則即使播放裝置內容,系統也不會開 啟,而且聲音和圖像會從電視機輸出 (第 48頁)。 • 視電視機而定,可能無法正確播放所播放內 容的起始處。 透過電視機遙控器進行選單操 作 除了HDMI控制功能以外,您也可以在與 “BRAVIA”同步功能相容的裝置上使用以 下功能。 • 場景選擇功能 • 家庭劇院控制 • 回音取消功能 • 語言連動 註 這些功能是Sony的專利功能。此功能無法在 非Sony製造的產品上運作。 場景選擇功能 註 • 在電視機的連結選單中,電視機會將系統識 別為“播放器”。 • 某些電視機可能無法使用某些操作。 HDMI待機直通省電設定 HDMI待機直通省電設定功能 (第48頁)可 讓您欣賞已連接裝置的聲音和圖像,而不 需開啟系統。 將[系統設定] - [HDMI設定] - [待機直通] 設為[自動] (第48頁)。預設設定為[自 動]。 註 如果系統所連接裝置的圖像沒有顯示在電視 機上,請將[待機直通]設為[開]。如果您連 接非
註 • 使用社交檢視功能時,如果系統的輸入為 [HDMI1]、[HDMI2]或[HDMI3],則輸入會自 動變更為[TV]。社交檢視與電視節目的聲音 會從系統的揚聲器輸出。 • 使用社交檢視功能時,如果系統的輸入非 [TV]、[HDMI1]、[HDMI2]或[HDMI3],聲音 只會從電視機的揚聲器輸出。 • 從電視機輸出聲音時,不能使用此功能。 語言連動 當您更改電視機畫面顯示語言,系統的畫 面顯示語言也會隨著更改。 44CT
使用設定顯示 您可對例如圖像和聲音等項目進行各種調節。 預設設定下被劃線。 1 2 3 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 選擇設定項目。 設定項目 解說 更新系統的軟體。(第46頁) [螢幕設定] 根據電視機的類型進行螢幕設定。(第46頁) [音訊設定] 根據連接插孔的類型進行音訊設定。(第46頁) [Bluetooth設定] 為BLUETOOTH功能進行詳細設定。(第47頁) [系統設定] 進行與系統有關的設定。(第48頁) [網路設定] 為網際網路與家庭網路進行詳細設定。(第49頁) [略過輸入設定] 為各個輸入指定輸入跳過設定。(第49頁) [簡易設置] 重新執行簡易設置,以進行基本設定。(第49頁) [重設] 將系統重設為原廠預設設定。(第50頁) 使用各種功能/設定 [軟體更新] 45CT
[軟體更新] 將軟體更新至最新的版本,您即可利用最 新的功能。 有關更新功能的資訊,請瀏覽以下網站: http://www.sony-asia.
註 當[音訊輸出]設定為[揚聲器+HDMI],而且選 擇[HDMI1]、[HDMI2]或[HDMI3]輸入時,不會 顯示系統的螢幕顯示 (OSD),而且OPTIONS與 DISPLAY按鈕沒有作用。 [聲音效果] 您可以開啟/關閉音場等音效。 [Sound Field開啟]:啟用所有音效。 [關]:停用音效。不要設定取樣頻率上限 時,選擇此項。 [音訊上混] [裝置清單] 當[Bluetooth模式]設為[傳送]時,顯示 已配對且偵測到的BLUETOOTH裝置 (SNK裝 置)清單。 [Bluetooth待機] 您可以設定[Bluetooth待機],讓本系統即 使在待機模式,仍能由BLUETOOTH裝置開 啟。此功能只有在您將[Bluetooth模式]設 為[接收]或[傳送]時才能使用。 [開]:當您從配對的BLUETOOTH裝置要求 進行BLUETOOTH連線時,本系統會自動開 啟。 [關]:關閉 [Bluetooth Codec - AAC] 此功能只有在您將[Bluetooth模式]設為 [接收]或[傳送]時才能使用。 [開]:啟用AAC轉碼器。 [關]:停用AAC轉碼器。 註 註 •
[自動]:資料傳輸速率會視環境自動改 變。如果音訊播放在此模式中不穩定,請 使用另外三個模式。 [音質]:使用最高位元速率。以較高品質 傳送聲音,但當連結品質不佳時,音訊播 放有時會不穩定。 [標準]:使用中間位元速率。將聲音品質 與播放穩定性達成平衡。 [連接]:優先考量穩定性。提供合理的聲 音品質,但連線狀態最穩定。如果連線不 穩定,則建議此設定。 [系統設定] [螢幕顯示語言] 您可選擇您要的系統畫面顯示語言。 [無線重低音音箱連接] 您可以再次執行主動式重低音揚聲器的無 線連接。詳情請參閱“執行主動式重低音 揚聲器的無線連接 (SECURE LINK)” (第38頁)。 [IR-Repeater] [開]:電視機的遠端訊號從主機背面傳送 (第41頁)。 [關]:關閉功能。 詳情請參閱“透過主機將遠端訊號傳送到 電視機” (第41頁)。 [HDMI設定] • [HDMI控制] (第42頁) [開]:HDMI控制功能啟用。使用HDMI連 接線連接的裝置可以互相控制。 [關]:關閉 • [待機與電視連結] (第42頁) 此功能在您將[HDMI控制]設為[開]時可 以使用。 [自動]:如果系統的輸入為
[自動更新設定] [網路連線診斷] • [自動更新] [開]:在所選[時區]中的當地時間上午2 點至上午5點之間且本系統未使用時自動 執行軟體更新。如果選擇[快速啟動/網 路待機]中的[關],則會在您關閉系統後 執行軟體更新。 [關]:關閉 • [時區] 選擇您的國家/地區。 您可以進行網路診斷以檢查網路是否正確 連線。 註 • 視更新的詳細資訊而定,即使將[自動更新] 選擇為[關],軟體更新仍可能會執行。 • 在發佈新軟體後的11天內會自動執行軟體更 新。 您可根據您的喜好更改本系統的名稱以便 本系統在使用[Bluetooth Audio]功能時 更容易被識別。此名稱也可用於其他網 路,例如家庭網路。依照螢幕指示進行, 使用軟體鍵盤輸入名稱。 [系統資訊] 您可顯示系統的軟體版本資訊和MAC位址。 [軟體授權資訊] 設定是否要顯示連接的家庭網路伺服器。 [自動家庭網路存取權限] [開]:允許從新偵測到的家庭網路控制器 自動存取。 [關]:關閉 [家庭網路存取控制] 顯示與家庭網路控制器相容的產品清單, 並設定是否接受來自清單中控制器的命 令。 [外部控制] [開]:允許家用自動化控制
[重設] [重設為原廠預設的設定] 您可選擇設定群組將系統設定重設為原廠 預設值。在群組中的所有設定將會被重 設。 [初始化個人資訊] 您可以清除存儲在系統中的個人資訊。 註 如果您廢棄、轉讓或轉售本系統,為了安全 起見請刪除所有個人資訊。請採取適當的措 施,例如在使用網路服務後登出。 50CT
選項選單清單 按OPTIONS即可使用各種設定和播放操作。可用項目視情形而不同。 解說 [影音同步] 調節圖像和聲音之間的時間差距。聲音輸出可延遲 (第27頁)。 [Sound Field] 變更音場設定 (第25頁)。 [Night] 選擇夜間模式 (第26頁)。 [Voice] 選擇語音模式 (第26頁)。 [DTS Dialog Control] 在串流DTS:X內容時調整對話音量。您可輕易聽到對話,因為對話從環境 雜音中凸顯出來。這項功能在某些音訊格式上沒有作用。 [略過輸入設定] 透過按INPUT +/- 在選擇功能時略過未使用的輸入 (第49頁)。 [輸入標籤設定] 您可以變更主選單上顯示的[HDMI1]、[HDMI2]或[HDMI3]的輸入名稱 (第 23頁)。 [重複設定] 設定重複播放。 [隨機設定] 設定隨機播放。 [播放/停止] 開始或停止播放。 [從頭開始播放] 從開頭播放項目。 [Multi-room群組同步] 設定在使用無線連接多個房間功能時,系統的聲音是否與其他揚聲器的聲 音同步 (第36頁)。 註 • 電視輸入不會顯示選項選單
圖像 故障排除 故障排除 若您在使用系統時遇到任何以下問題,請 在尋求維修之前使用此故障檢修指南以幫 助您解決有關問題。若問題持續,請就近 與Sony經銷商聯絡。 在要求進行維修時,請務必同時攜帶您的 主機和主動式重低音揚聲器,即使看起來 只有一個有問題。 電源 系統電源未開啟。 檢查交流電源線已穩固地連接。 將交流電源線從牆壁插座中拔出,數分 鐘後再重新接上。 雖然電視機開啟,但系統沒有開啟。 將[系統設定] - [HDMI設定] - [HDMI控 制]設為[開] (第48頁)。電視機必須 支援HDMI控制功能 (第42頁)。詳情請 參閱電視機的使用說明書。 檢查電視機的揚聲器設定。系統電源與 電視機的揚聲器設定同步。詳情請參閱 電視機的使用說明書。 如果上次聲音從電視機的揚聲器輸出, 即使電視機開啟,系統也不會開啟。 當電視機關閉時,系統也關閉。 檢查[系統設定] - [HDMI設定] - [待機 與電視連結]的設定 (第48頁)。[待機 與電視連結]設為[開]時,不論輸入為 何,關閉電視機時,都會自動關閉系 統。 雖然電視機關閉,但系統沒有關閉。 檢查[系統設定]
系統未開啟時,不從電視機輸出圖像和 聲音。 在系統上將[系統設定] - [HDMI設定] [HDMI控制]設為[開],然後將[待機直 通]設為[自動]或[開] (第48頁)。 開啟系統,然後將輸入切換至目前播放 的裝置。 如果連接至非Sony製造且支援HDMI控制 功能的裝置,請將[系統設定] - [HDMI 設定] - [待機直通]設為[開] (第48 頁)。 HDR內容無法以高動態範圍顯示。 聲音 系統無法輸出電視機的聲音。 檢查連接系統與電視機的HDMI連接線、 光纖數位線或類比音源線的類型和連接 (請參閱隨附的入⾨指南)。 斷開連接在TV和系統之間的連接線,然 後重新牢固地連接。從AC電源插座斷開 TV和系統的AC電源線,然後重新連接。 透過HDMI連接線連接本系統和電視機 時,檢查以下內容。 – 所連接電視機的HDMI插孔標示 “ARC”。 – 電視機的HDMI控制功能設為開啟。 – 在系統上,[HDMI控制]設為[開], [電視機音訊輸入模式]設為[自動] (第48頁)。 如果電視機與Audio Return Channel不 相容,請連接光纖數位線 (無附帶) (
播放相容於版權保護技術 (HDCP)的 內容時,可能無法從系統輸出聲音。 將[系統設定] - [HDMI設定] - [HDMI訊 號格式]設為[標準格式] (第17頁)。 不能產生環繞效果。 視輸入訊號與音場設定而定,環繞聲處 理可能無法有效運作。環繞音效可能不 明顯,視節目或光碟而定。 若要播放多聲道音訊,請檢查連接本系 統的裝置上,數位音訊輸出設定是否正 確。詳情請參閱連接裝置附帶的使用說 明書。 當[音訊輸出]設定為[揚聲器+HDMI], 系統揚聲器輸出的聲音和電視機的聲音 屬於相同立體形態,即使播放多聲道音 源也一樣。 在此狀況下,請將它設定為 [揚聲器] (第46頁)。 聲音比圖像延遲。 以無線連接多個房間功能播放[TV]、 [HDMI1]、[HDMI2]、[HDMI3]或 [Analog]輸入的聲音時,系統的聲音比 畫面慢,因為要與其他揚聲器的聲音同 步。如果聲音與畫面之間的時間差會困 擾您,請按OPTIONS,將[Multi-room群 組同步]設定為[關]。(對於電視輸入, 請按OPTIONS與/直到“M.
確保USB裝置已開啟。 如果透過USB集線器連接USB裝置,切斷 連接,然後將USB裝置直接連接至系 統。 行動裝置連接 無法完成BLUETOOTH連線。 確定主機的BLUETOOTH指示燈亮起 (第 28頁)。 確認要連接的BLUETOOTH裝置已開啟, 並已啟用BLUETOOTH功能。 讓本系統與BLUETOOTH裝置互相靠近。 再次配對本系統和BLUETOOTH裝置。您 可能需要先使用BLUETOOTH裝置取消本 系統的配對。 配對資訊可能被刪除。再次進行配對操 作 (第28頁)。 讓本系統與BLUETOOTH裝置互相靠近。 確認本系統未接收來自無線LAN裝置、 其他2.
有線LAN連接 無線連接多個房間 系統無法連接至網路。 聲音比圖像延遲。 檢查網路連接 (第18頁)和網路設定 (第49頁)。 以無線連接多個房間功能播放[TV]、 [HDMI1]、[HDMI2]、[HDMI3]或 [Analog]輸入的聲音時,系統的聲音比 畫面慢,因為要與其他揚聲器的聲音同 步。如果聲音與畫面之間的時間差會困 擾您,請按OPTIONS,將[Multi-room群 組同步]設定為[關]。(對於電視輸入, 請按OPTIONS與/直到“M.
確保連接系統的裝置支援HDMI控制功 能。 在連接系統的裝置上啟用HDMI控制功 能。詳情請參閱您裝置的使用說明書。 HDMI控制功能可控制的裝置類型與數目 受HDMI CEC標準的限制,如下所示: – 錄製裝置 (Blu-ray Disc錄影機、 DVD錄影機等):最多3個裝置 – 播放裝置 (Blu-ray Disc播放器、 DVD播放器等):最多3個裝置 (本系 統使用其中之一) – 與調諧器相關的裝置:最多4個裝置 – 音訊系統 (接收器/耳機):最多1個 裝置 (本系統使用) 系統沒有正常運作。 系統可能處於示範模式。若要取消示範 模式,請重設系統。按住主機上的 (電源)和-超過5秒 (第58頁)。 “PRTCT”、“PUSH”及“POWER”在前 顯示面板中交替閃爍。 故障排除 按 (電源)關閉系統。指示消失 後,拔出交流電源線,並確定系統的通 風口沒有堵塞。 “BT TX”出現在前顯示面板中。 按遙控器上的BLUETOOTH RX/TX將 [Bluetooth模式]切換到[接收]。如果 [Bluetooth模式]設為[傳送],會出現 “BT TX” (第
重設系統 若系統仍無法正確運作,請依以下方法 重設系統。 1 2 3 4 5 按HOME。 主選單出現在電視機螢幕上。 從主選單中選擇 [設置]。 設定顯示出現在電視機螢幕上。 選擇[重設] - [重設為原廠預設的設 定]。 選擇您要重設的選單項目。 選擇[開始]。 若要取消重設 在步驟5中選擇[取消]。 如果您不能使用主選單執行重 設 按住主機上的 (電源)和-超過5秒。 設定回到初始狀態。 註 透過重設,主動式重低音揚聲器的連結可能 遺失。在此情況下,請執行“執行主動式重 低音揚聲器的無線連接 (SECURE LINK)” (第38頁)。 58CT
BLUETOOTH部分 其他資訊 規格 主動式揚聲器系統 (SAST5000) 放大器部分 輸入 HDMI IN 1/2/3* ANALOG IN TV IN (OPT) 輸出 HDMI OUT (TV (ARC))* * HDMI IN 1/2/3和HDMI OUT (TV (ARC))插 孔支援HDCP 2.2通訊協定。HDCP 2.
頂置揚聲器區塊部分 揚聲器系統 全範圍揚聲器系統、氣墊式 揚聲器 65 mm圓錐型、磁流揚聲器 一般常規 電源需求 台灣機型: 120 V AC,50 Hz/60 Hz 其他國家/地區的機型: 220 V - 240 V AC,50 Hz/60 Hz 耗電量 開啟:90 W 有關待機模式下耗電量的詳情,請參 閱“每個待機模式設定值的耗電量” (第61頁)。 尺寸* (約)(寬/高/深) 1180 mm × 80 mm × 142 mm (不含網 格) 1180 mm × 80 mm × 145 mm(含網格) *不包括突出部分 質量 (約) 8.3 kg (不含網格) 8.
每個待機模式設定值的耗電量 待機模式 預設設定 設定值 [開] [關] [開]/[關]1) [開]/[關]1) [遙控啟動] (第49頁) [關] [關] [開] [開]/[關]1) [快速啟動/網路待機] (第48頁) [關] [關] [關] [開] 低於2 W 低於0.
可以播放的音頻檔案類 型 轉碼器 副檔名 MP3 (MPEG-1 Audio Layer III)1) .mp3 AAC/HE-AAC1),2) .m4a、.aac3)、 .mp4、.3gp WMA9標準2) .wma WMA10 Pro4) .wma LPCM1) .wav FLAC2) .flac、.fla Dolby Digital1),3) .ac3 DSF2) .dsf DSDIFF2),5) .dff AIFF2) .aiff、.aif ALAC2) .m4a Vorbis .ogg Monkey’s Audio .ape 1) 2) 3) 4) 5) 系統可以播放“.
支援的輸入音訊格式 本系統支援的音訊格式如下。 格式 功能 “TV” (ARC) “TV” (OPT) LPCM 2ch LPCM 5.1ch - - LPCM 7.1ch - - Dolby Digital Dolby TrueHD - - Dolby Digital Plus - Dolby Atmos - Dolby TrueHD - - Dolby Atmos - Dolby Digital Plus - DTS DTS-ES Discrete 6.1, DTS-ES Matrix 6.
支援的HDMI視訊格式 本系統支援的視訊格式如下。 解析度 4K 4096 × 2160p 3840 × 2160p 畫面播放速率 50/59.94/60 Hz1) 23.98/24/25/29.97/ 30 Hz1) 50/59.94/60 Hz 4K 4096 × 2160p 3840 × 2160p 1920 × 1080p 1920 × 1080i 1280 × 720p 1) 23.98/24/25/29.97/30 Hz 3D 色彩空間 色彩深度 - RGB 4:4:4 YCbCr 4:4:4 8位元 - YCbCr 4:2:2 8/10/12位元 - YCbCr 4:2:0 10/12位元 - RGB 4:4:4 YCbCr 4:4:4 10/12位元 - YCbCr 4:2:0 8位元 - RGB 4:4:4 YCbCr 4:4:4 8位元 - YCbCr 4:2:2 8/10/12位元 [HDMI訊號格式]設定 [增強格式]2) 50/59.94/60 Hz 23.98/24/25/29.
1) HDCP 2.2是新增強的版權保護技術,用於保護如4K電影等內容。 2) BT.
關於BLUETOOTH通訊 • BLUETOOTH裝置必須在距離彼此約10公尺 (無障礙)範圍內才能使用。在下列情形, 實際的通訊範圍可能縮短。 – 當透過BLUETOOTH連接的裝置之間有人、 金屬物體、牆壁或其它障礙 – 無線LAN安裝的位置 – 在使用中的微波爐周圍 – 其它電磁波發生的地方 • BLUETOOTH裝置與無線LAN (IEEE 802.11 b/g/n)使用相同的頻率波段 (2.
利益 (包括但不限於全部智慧財產權)。 最終使用者授權協議 重要: 在使用本軟體前,請先詳細閱讀本最終使 用者授權協議 (以下簡稱 「授權協 議」)。您使用本軟體即表示您接受本授 權協議之條款。如果您不接受本授權協議 之條款,即不得使用本軟體。 軟體授權 本軟體係授權軟體,並非販售軟體。本軟 體受著作權和其他智慧財產法律與國際條 約保護。 著作權 本軟體 (包括但不限於納入本軟體中之任 何影像、照片、動畫、影片、聲音、音 樂、文字和 「小應用程式」)之一切權利 和所有權均為索尼或某個或數個第三人供 應商所有。 授權 索尼授予您使用本軟體之有限授權,但僅 限與您的相容裝置 (以下簡稱 「裝置」) 相關,且僅供您個人非商業使用。索尼和 第三人供應商均明示保留本授權協議並未 特別授予您之一切本軟體權利、所有權和 您不能複製、公開、調整、再散布、企圖 推衍原始碼、修改、執行逆向工程、解編 譯或拆解任何本軟體 (無論全部或部 分),亦不得自本軟體創作任何衍生作品 或創作本軟體之任何衍生作品,除非該等 衍生作品是本軟體所刻意促成之結果。您 不得修改或破壞本軟體之任何數位權利管 理功能。您不得略過、修改、阻撓或規
體而提供之特定內容和服務得由索尼對其 並無控制權之第三人提供。使用內容服務 必須有網際網路連線。內容服務得隨時中 斷。 網路連線和第三人服務 您確認並同意,存取本軟體特定功能可能 需有網路連線,您應自行負責取得網路連 線。此外,您應自行支付與您取得網路連 線相關之任何第三人費用,包括但不限於 網路服務供應商或上網費。本軟體之運作 可能會視您取得的網路連線和服務之性 能、頻寬或技術限制而有上限或受到限 制。此等網路連線之提供、品質與安全性 應由提供相關服務之第三人負全部責任。 出口與其他管制 您同意遵守您居住地區或國家一切適用之 出口與再出口限制與規定,且不會將本軟 體向禁止國家移轉或准許移轉,亦不會以 其他方式違反任何相關限制或規定。 高風險活動 本軟體並非容錯軟體,且其設計、製造或 使用或轉售目的並非能在危險環境中使 用,需有自動故障排除性能之線上控制設 備,例如操作核能設施、航空器導航或通 訊系統、空中交通管制、直接生命維持機 器,或武器系統,而一旦本軟體故障即可 能導致死亡、人員受傷或嚴重的身體或環 境損害 (以下簡稱 「高風險活動」)。索 尼、每一個第三人供應商,以及其各自之 各個關係企業均明確
完整合意、拋棄、可分割性 本授權協議和索尼的隱私政策 (各自均得 不時增補和修訂)共同構成您與索尼間有 關本軟體之完整合意。索尼未行使或強制 執行本授權協議之任何權利或條款均不應 構成拋棄該等權利或條款。若本授權協議 有任何部分經認定為無效、違法或無法執 行,則該條款應於准許之最大範圍內加以 執行,以維持本授權協議之意旨,而其他 部分則均維持完整效力和有效性。 聯絡取得指示。您於任何該等通知生效日 期後持續使用本軟體即應視為您同意受到 該等修訂之約束。 第三方受益人 與相關當事人之本軟體相關時,各第三人 供應商均係本授權協議各條款之明示預定 第三人受益人且應有權得行使該等條款。 若您有關於本授權協議之任何疑問,請透 過各地區或國家適用之聯絡地址以書面方 式和索尼聯絡。 準據法與司法管轄 《聯合國國際貨物買賣合約公約》不應適 用本授權協議。本授權協議應受日本法律 管轄,不適用法律牴觸規定。因本授權協 議所生之任何爭議均應交付日本東京地方 法院之專屬地管轄,且當事人茲同意該等 法院之地點與司法管轄權。 Copyright © 2014 Sony Corporation.
關於處理主動式重低音揚聲器 預先注意事項 關於安全 • 如果有任何固體或液體掉入系統,請拔出系 統的插頭,並在繼續操作前讓合格的技術人 員進行檢查。 • 請勿攀爬主機和主動式重低音揚聲器,否則 可能跌落受傷,或是損壞系統。 關於電源 • 操作系統之前,請先確定操作電壓與當地電 源供應相符。操作電壓如主機背面的標示牌 所示。 • 若您將長時間不使用系統,請務必將系統插 頭從牆壁插座拔出。若要切斷交流電源線, 請握住插頭拔出,切勿拉扯電線。 • 為了安全起見,插頭的一個葉片寬過另一 個,並只能以一個方向插入牆壁插座。如果 您不能把插頭完全插入插座,請聯絡您的經 銷商。 • 交流電源線必須在合格服務商店更換。 關於變熱 本系統會在操作時變熱,這不是故障。如果 持續長時間以高音量使用本系統,系統的背 部和底部的溫度會變得相當高。為了避免燙 傷,請勿觸碰系統。 關於放置 • 請勿將系統擺放於靠近熱源的地方,或者會 受到陽光直曬、灰塵過多或機械性撞擊的地 方。 • 請勿在主機和主動式重低音揚聲器後方放置 任何物品,以免堵塞通風孔,造成故障。 • 請勿將電視機以外的金屬物體放在系統附 近。無線功能可能不穩定。 •
版權與商標 WALKMAN®和WALKMAN®標誌是Sony Corporation的註冊商標。 本系統結合Dolby* Digital與DTS** Digital Surround System。 “PlayStation”是Sony Interactive Entertainment Inc.的註冊商標或商標。 * 本產品經過杜比實驗室的許可而製造。 Dolby、Dolby Atmos、Dolby Vision和雙D 符號是杜比實驗室的註冊商標。 MPEG Layer-3 音頻編碼技術和專利由 Fraunhofer IIS和Thomson授權。 **關於DTS專利,請參閱http:// patents.dts.com。依據DTS, Inc.的授權製 造。 DTS、其符號、DTS與其符號的結合、 DTS:X,與DTS:X標誌是DTS, Inc.在美國和/ 或其他國家的註冊商標或商標。 © DTS, Inc.
本產品包含的軟體受GNU通用公共授權 (“GPL”)或GNU較寬鬆通用公共授權 (“LGPL”)的規範。這些規範讓客戶有權 利遵循GPL或LGPL取得、修改及重新散佈軟體 的原始程式碼。 如需GPL、LGPL及其他軟體授權的詳細資訊, 請參閱產品[設置]選單的[系統設定]中的[軟 體授權資訊]。 此產品中所使用軟體的原始程式碼受GPL與 LGPL規範,並可從網路取得。若要下載,請 存取下列: URL: http://oss.sony.net/Products/Linux 請注意,Sony無法回答或回應與此原始程式 碼相關的任何詢問。 “DSEE HX”是Sony Corporation的商標。 DLNA™、DLNA標誌和DLNA CERTIFIED™是 Digital Living Network Alliance的商標、 服務標記或認證符號。 “TRILUMINOS”和“TRILUMINOS”標誌是 Sony Corporation的註冊商標。 本產品採用受第3方授權管轄的Spotify軟 體,詳情請見*: https://developer.spotify.
索引 A L Audio Return Channel (ARC) 42, 48 連線伺服器設定 49 略過輸入設定 49 B Bluetooth Codec - AAC 47 Bluetooth Codec - LDAC 47 Bluetooth待機 41, 47 Bluetooth模式 47 Bluetooth設定 47 BT.2020 65 N C 軟體更新 46 軟體更新通知 48 軟體授權資訊 49 重設 50, 58 重設為原廠預設的設定 50, 58 初始化個人資訊 50 D NFC 29 P PRTCT 57 R S 待機直通 41, 43, 48 電視機音訊輸入模式 48 DSEE HX 46 多路廣播聲音 39 聲音效果 47 時區 49 視訊直接顯示 46 輸出視訊解析度 46 Sony | Music Center 33 E W 兒童鎖功能 40 外部控制 49 網際網路設定 49 網路 18 網路連線診斷 49 網路連線狀態 49 網路設定 49 無線播放品質 47 無線重低音音箱連接 48 G 更新 46 H HDCP 2.
螢幕設定 46 螢幕顯示語言 48 Z 主動式重低音揚聲器 27, 38, 54 裝置名稱 49 裝置清單 47 自動待機模式 48 自動更新 49 自動更新設定 49 自動家庭網路存取權限 49 74CT