Operating instructions

6
4 Press X/x to select the items to copy, and
press ENTER.
When ripping a CD, select “DISC” or
“TRACK.”
When copying data files, select “DISC,”
“ALBUM,” “TRACK,” or “FILE.”
If you select “DISC,” go to step 6.
5 Press C/X/x/c to select albums, tracks or
files, and press ENTER.
When selecting albums, tracks or files, the
REC LED indicator flashes.
The number of selected albums, tracks or files
is displayed in the front panel display in
recording standby mode.
6 Press
N.
When ripping a CD or copying data files, the
REC LED indicator stays lit.
Recording is started. Recording progress is
displayed. After recording finishes,
“Completed” is displayed.
To record simply
You can rip a CD or copy data files simply by
pressing the REC TO USB button. When
pressing the REC TO USB button, the display
appears. Press N according to the display.
Recording is started.
To erase “ALBUM,” “TRACK,” or “FILE”
Press CLEAR. Follow the displayed
message. When erasing the album, the player
may erase unshown files on the list menu of
ALBUM at the same time.
To remove the USB device
Stop playback, ripping a CD, or copying/
erasing data files, and then disconnect the
USB device from the USB jack. Do not
remove the USB device during operation, as
data corruption may occur.
About supported USB devices
• This player supports USB Mass Storage
Class only.
• This player supports FAT formatted USB
devices only (except exFAT).
• Some USB devices may not work with this
player.
Notes about USB devices
• If a USB device has a power switch, turn it
on before connecting the USB device to the
USB jack of the player.
• For some devices, LUN (Logical Unit
Number) may appear. To change the LUN
or original storage, press when the
list of albums or tracks is displayed.