Operation Manual

MD – Play
13
GB
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press
MD NX. However, the program is cleared after
you remove the MD or press GROUP.
• “– – –.– –” appears when the total program time
exceeds 1,000 minutes.
This function allows you to listen only to your
favorite tracks which you have registered into a
group. For details of the Group Function, see
“Registering tracks in groups” on page 23.
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press GROUP in stop mode repeatedly
until “GROUP” appears.
3 Press GROUP SKIP repeatedly until the
desired group appears.
4 To start playing from a specific track in
the group, press . or >
repeatedly until the desired track
appears.
Proceed to step 5 when you start playing
from the first track in the group.
5 Press MD NX.
Playback starts.
When the playing of the last track in the
group finishes, the MD deck stops
automatically.
Note
If you select a group that does not have any tracks
registered and press MD NX, playback starts from
the first track of the first group on the MD.
Tips
• You can change play mode (Normal Play/Shuffle
Play/Repeat Play/Program Play) only for the tracks
in the group. To select the desired play mode, select
the play mode before step 3.
• You can perform the operations described under
“Playing an MD” (page 11) and “Programming MD
tracks” (page 12) only for the tracks in the group.
To Do this
Cancel Program
Play
Press PLAY MODE in stop mode
repeatedly until both “PGM” and
“SHUF” disappear.
Check the
program order
Press . or > repeatedly
during Program Play.
Check the total
number of
programmed
tracks
Press DISPLAY in stop mode.
The total number of programmed
steps appears.
Add a track to the
end of the
program
Perform steps 3 and 4 in stop
mode.
Erase the
program
Press CLEAR in stop mode or in
step 4. Each time you press the
button, a track is cleared from the
end of the program.
Playing only the tracks in
the desired group