The software of this system may be updated in the future. To find out details on any available updates, please visit the following URL. https://www.sony.com/am/support Le logiciel de ce système est susceptible d’être mis à jour. Pour en savoir plus sur les éventuelles mises à jour disponibles, visitez l’URL suivante. https://www.sony.com/am/support El software de este sistema podría actualizarse en el futuro. Para obtener más información sobre las actualizaciones disponibles, visite la siguiente URL.
Owner’s Record The model and serial numbers are located on the rear of the bar speaker. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding the speaker system. Model No. HT-A7000 Serial No. WARNING To reduce the risk of fire or electric shock, do not expose this speaker system to rain or moisture.
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this speaker system does cause harmful interference to radio or television reception, which can be determined by turning the speaker system off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna.
This speaker system contains licenseexempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: Caution for mounting the bar speaker on a wall (1) This speaker system may not cause interference; and (2) This speaker system must accept any interference, including interference that may cause undesired operation of the speaker system.
Table of Contents About Manuals of the Speaker System ......................................7 Startup Guide What’s in the Box (separate document) What You Can Do with the Speaker System ..................................... 8 Guide to Parts and Controls .........10 Using the Home Menu ................. 14 Setting Up Installing the Speaker System ...... 15 Connecting to a TV ....................... 18 When Your TV Has the S-CENTER SPEAKER IN Jack ..................... 19 Connecting an AV Device ..........
Changing the Settings Changing the Brightness of the Front Panel Display and Indicators (DIMMER) .............. 45 Saving Power in Standby Mode ...................................... 46 Performing Easy Setup ................ 46 Performing Advanced Settings .................................. 47 Updating the Software ................ 48 Troubleshooting Troubleshooting .......................... 50 Resetting the Speaker System .... 58 Additional Information Specifications ...............................
Help Guide (Web manual) About Manuals of the Speaker System The information included in each manual is as shown below. Startup Guide Sound Bar Startup Guide Introduces the initial procedures concerning installation and connection for using the speaker system, and operations until you play music. Operating Instructions (this document) For customers in Americas https://rd1.sony.net/ help/ht/a7000/h_uc/ For customers in other countries/ regions https://rd1.sony.
What You Can Do with the Speaker System The speaker system supports object-based audio formats such as Dolby Atmos and DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision. TV Blu-ray Disc™ player, set-top box, gaming console, etc.
Network Wireless LAN router Internet “What You Can Do by Connecting the Speaker System to a Network” (page 33) For the connecting method to the network and functions enabled with the network connection, refer to Help Guide (Web manual). For customers in Americas https://rd1.sony.net/help/ht/a7000/h_uc/ For customers in other countries/regions https://rd1.sony.
Guide to Parts and Controls Bar Speaker Front (power) button Turns on the speaker system or sets it to standby mode. (input select) button Selects the input for playback on the speaker system. BLUETOOTH button (page 25) (MUSIC SERVICE) button If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button. This button may not be available in some countries/regions. +/– (volume) buttons 10US Top speakers Output the sound upward.
Rear IR repeater Transmits the remote signal of the TV remote control to the TV. S-CENTER OUT jack (page 19) (USB) port (page 29) HDMI OUT (TV (eARC/ARC)) jack Connect a TV that has an HDMI input jack with an HDMI cable. The speaker system is compatible with eARC and ARC. ARC is the function that sends TV sound to an AV device such as the speaker system from the TV’s HDMI jack.
Remote Control (power) Turns on the speaker system or sets it to standby mode. (MUSIC SERVICE) button If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button. This button may not be available in some countries/regions.
/// (page 14) (enter) (page 14) BACK (page 14) OPTIONS (page 40) Displays the options menu on the TV screen. The options menu is displayed in the front panel display for TV input. HOME (page 14) REAR (rear speakers volume) +/– Adjusts the volume of the optional rear speakers when connecting them. Playback operation buttons / (previous/next) Selects the previous/next track or file. Pressing and holding it searches backward or forward (rewind/fast forward) during playback.
Using the Home Menu You can display the home menu on the TV screen by connecting the speaker system and TV with an HDMI cable. ///, (enter) HOME BACK 1 Press HOME. The home menu appears on the TV screen. 2 Press // to select the category that you want, then press or (enter). The items for the selected category appear under the category list on the TV screen.
1 Setting Up Installing the Speaker System Prepare two screws (not supplied) that are suitable for the holes on the wall mounting bracket (supplied). 4 mm (3/16 in) More than 30 mm (1 3/16 in) Installing the Bar Speaker 5.0 mm (13/64 in) For the installation, refer to Startup Guide (separate document).
3 Align the vertical line above the “ TV CENTER LINE” printed on the WALL MOUNT TEMPLATE (supplied) with the center of the width of your TV. 5 Fasten the screws prepared in step 1 securely into the screw marks on the “ SCREW LINE” printed on the WALL MOUNT TEMPLATE.
8 Put the bar speaker on the wall mounting brackets. Notes • When adhering the WALL MOUNT TEMPLATE on the wall, smooth it out fully. • Make sure to use the supplied wall mounting brackets when mounting the bar speaker on a wall. Do not mount the bar speaker on a wall directly. The temperature inside the bar speaker rises considerably, and it may cause damage or malfunction.
Connecting to a TV Connecting a TV Compatible with ARC/eARC 1 Connect the HDMI IN jack compatible with ARC/eARC on the TV and HDMI OUT (TV (eARC/ARC)) jack on the speaker system with the HDMI cable (supplied). Connecting a TV That Is not Compatible with ARC/eARC 1 Connect the HDMI IN jack on the TV and HDMI OUT (TV (eARC/ARC)) jack on the speaker system with the HDMI cable (supplied). HDMI cable (supplied) HDMI cable (supplied) TV TV Note Make sure that the connectors are firmly inserted.
2 Connect the optical digital output jack on the TV and the TV IN (OPT) jack on the speaker system with an optical digital cable (not supplied). When Your TV Has the SCENTER SPEAKER IN Jack You can output the center part of the speaker system sound from the TV by connecting the TV with the following method. 1 2 Connect the speaker system and TV with the HDMI cable (supplied) (page 18).
Note Make sure that the connectors are firmly inserted. Tip If the length of the TV center speaker mode cable is not sufficient, use a commercially available stereo mini cable. Connecting an AV Device Connecting an AV Device Compatible with the 2K/4K Video Format You can output sound such as Dolby Atmos, Dolby TrueHD, and DTS:X in high quality by connecting an AV device to the speaker system.
Tips • If a TV is compatible with eARC, you can also output the high quality sound by connecting an AV device to the HDMI IN jack on the TV. In this case, enable the eARC function of the TV. • Select the appropriate HDMI cable and [HDMI Signal Format] setting according to the video formats output from the device connected to the speaker system. For details, refer to Help Guide.
When the eARC compatible HDMI IN jack on the TV does not support the 8K video input: Connect the HDMI OUT jack on an AV device to the HDMI IN jack compatible with the 8K video input on a TV with an HDMI cable (not supplied). Make sure that the eARC function of the TV is on. Connecting to the AC Outlet (mains) 1 Connect the AC power cord (mains lead) (supplied) to the AC inlet on the bar speaker, then connect to the AC outlet (mains).
3 Performing Initial Settings Press HOME, then perform initial settings by following the onscreen instructions. Initial settings screen 1 Press (power) on the remote control supplied with the speaker system to turn on the speaker system. Operate the remote control by pointing it toward the front of the bar speaker. When the speaker system turns on, [TV] appears in the front panel display. (power) • Press /// and (enter) to select the item as instructed on the screen. • Once [Setup is complete.
Watching Images Watching TV 1 2 3 4 Press HOME. The home menu appears on the TV screen. 1 2 Select [Watch] - [TV] on the home menu. Select the program using the TV remote control. The selected TV program appears on the TV screen and the TV sound is output from the speaker system. Adjust the volume (page 35). Note When the bar speaker obstructs the remote control sensor of the TV and you cannot operate the TV by the TV remote control, enable the IR repeater function of the speaker system.
Listening to Music/Sound Listening to Sony TV Sound with the BLUETOOTH® Function What You Can Do by Connecting a TV with the BLUETOOTH Function Listening to TV Sound by Connecting the Speaker System and TV Wirelessly You need to perform pairing of the speaker system and TV by using the BLUETOOTH function. Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly in advance.
4 Make sure that the BLUETOOTH indicator on the bar speaker flashes quickly in blue and [PAIRING] appears in the front panel display. The speaker system enters the BLUETOOTH pairing mode. PAIRING 5 6 7 8 9 26US On the TV, search the speaker system by performing the pairing operation. The list of the BLUETOOTH devices that are detected appears on the TV screen. For the operation method to pair the BLUETOOTH device to the TV, refer to the operating instructions of the TV.
Tip When the TV is turned off, the speaker system is also turned off by interlocking with the TV power. About operations with the remote control that is supplied with the speaker system You can use the following buttons.
2 Make sure that the BLUETOOTH indicator on the bar speaker flashes quickly in blue and [PAIRING] appears in the front panel display. The speaker system enters the pairing mode.
2 3 4 5 Press the BLUETOOTH button. The speaker system automatically reconnects to the mobile device it was most recently connected to. Make sure that the BLUETOOTH indicator on the bar speaker lights in blue and [BT] appears in the front panel display. A connection between the speaker system and mobile device has been established. Listening to Music on a USB Device You can play music files stored on a connected USB device. For playable types of files, see “Playable Types of Audio Files” (page 61).
Listening to the Device Connected with an Analog Audio Cable You can listen to sound of an audio device such as a WALKMAN®, etc. that is connected to the ANALOG IN jack on the bar speaker. 1 Connect an audio device to the ANALOG IN jack. Listening to Sound of the Connected TV or Device Using Headphones Listening to Sound by Pairing with Headphones 1 2 3 4 Analog audio cable (not supplied) 2 3 4 5 Smartphone, WALKMAN®, other audio devices, etc. Press HOME. The home menu appears on the TV screen.
7 Adjust the volume. Adjust the volume level of the headphones first. Then, adjust the volume level of the headphones with +/– on the bar speaker or (volume) +/– on the remote control. To remove the paired headphones from the device list 1 Press HOME. The home menu appears on the TV screen. 2 Select [Setup] - [Advanced Settings] on the home menu. 3 Select [Bluetooth Settings] - [Device List]. 4 Move the cursor to the name of the headphones that you want to remove, and then press DISPLAY.
To disconnect the paired headphones Perform any of the following items. – Disable the BLUETOOTH function on the headphones. – Set [Setup] - [Advanced Settings] [Bluetooth Settings] - [Bluetooth Mode] to [Receiver] or [Off]. – Turn off the speaker system or headphones. – Select the device name of the connected headphones from [Setup] - [Advanced Settings] [Bluetooth Settings] - [Device List]. [Connected] of the device name disappears.
Listening to Music by Connecting to a Network What You Can Do by Connecting the Speaker System to a Network You can perform streaming playback of music content via the speaker system by operating a smartphone, tablet, or iOS device, or play music stored on a computer via the speaker system by connecting to the network. For details of functions and operations, refer to Help Guide.
Sony | Music Center You can control the speaker system wirelessly by installing the “Sony | Music Center” app on your smartphone or tablet device. Home Network You can play music files stored on your computer on a network location via your home network.
The volume level appears in the front panel display. Adjusting the Volume and Sound Quality Adjusting the Volume (volume) +/– Notes • The optional rear speakers are designed for playback of the surround part of the multi-channel sound and surround sound that is created from the 2-channel sound using virtual processing. When the input source does not contain much surround sound, the surround sound from the optional rear speakers may be difficult to hear.
Enjoying Immersive Surround Experience (IMMERSIVE AE) You can feel immersed by the sound from not only the horizontal direction, but also from the upward direction by working sound modes effectively (page 37). This function also works for the 2.0 channel signal such as TV programs. IMMERSIVE AE 1 Press IMMERSIVE AE to set the function on or off. The Immersive Audio Enhancement setting appears on the TV screen.
Setting the Sound Effect That Is Tailored to Sound Sources (Sound Mode) You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources. This function works when [Setup] [Advanced Settings] - [Audio Settings] [Sound Effect] is set to [Sound Mode On]. AUTO SOUND MUSIC STANDARD CINEMA 1 Press AUTO SOUND, CINEMA, MUSIC, or STANDARD to select the sound mode. The selected sound mode appears on the TV screen.
Making Dialogs Clearer (VOICE) Enjoying Clear Sound with Low Volume at Midnight (NIGHT) VOICE NIGHT 1 Press VOICE to set the function on or off. The voice mode setting appears on the TV screen. Mode Explanation [Voice: On] Dialog is easily heard by enhancing dialog range. [Voice: Off] Press NIGHT to set the function on or off. The night mode setting appears on the TV screen. Mode Explanation [Night: On] Sound is output at low volume with minimum loss of fidelity and clarity of dialog.
Adjusting the Delay Between the Picture and Sound When the sound does not match the pictures on the TV screen, you can adjust the delay between the picture and sound. The setting method differs depending on the input. For details, refer to Help Guide. Enjoying Multiplex Broadcast Sound (AUDIO) You can enjoy multiplex broadcast sound when the speaker system receives a Dolby Digital multiplex broadcast signal. AUDIO 1 Press AUDIO repeatedly to select the desired audio signal.
• The audio signal does not appear on the TV screen while the TV input is selected. In this case, you can check the audio signal in the front panel display. Adjusting the Dialog Volume While the DTS:X Content is Played Back By adjusting the dialog volume, you can easily listen to dialog since it stands out from the ambient noise. This function works while playing content that is compatible with the DTS:X dialog control function. The setting method differs depending on the input.
When Playing Content on an AV Device 1 2 3 Press OPTIONS. The options menu appears on the TV screen. Select [DTS Dialog Control]. Adjust the dialog volume using / , then press (enter). You can adjust from 0.0 dB to 6.0 dB in 1.0 dB increments.
Using the Speaker System by Interlocking with a TV Operating the Speaker System by Interlocking with a TV (Control for HDMI Function) Connecting a TV compatible with the Control for HDMI function using an HDMI cable enables you to interlock the speaker system operation such as power on/off or volume adjustment with a TV. • If you enable the Control for HDMI (“BRAVIA” sync) function when using a TV manufactured by Sony, the Control for HDMI function of the speaker system is also enabled automatically.
Volume adjustment The sound of the TV you are watching is output from the speaker system automatically. You can adjust the speaker system volume by the TV remote control. Other Interlocking Functions Menu Operation by TV Remote Control Operating the Speaker System by Interlocking with a TV Compatible with the “BRAVIA” Sync Function You can operate the menu of the speaker system by selecting the name of the speaker system when changing input or operating the Sync Menu on the TV.
Home Theatre Control Function Setting the speaker system, setting the sound mode settings, input switching, etc. can be done without switching the TV input.
Changing the Settings Changing the Brightness of the Front Panel Display and Indicators (DIMMER) about 10 seconds. However, in some cases, the front panel display and indicators may not turn off. In this case, the brightness of the front panel display and indicators are the same as [Dimmer: Dark]. • The display mode does not appear on the TV screen while the TV input is selected. In this case, you can check the display mode in the front panel display.
Saving Power in Standby Mode Check that you have made the following settings: – [Setup] - [Advanced Settings] [HDMI Settings] - [Standby Through] is set to [Off]. – [Setup] - [Advanced Settings] [System Settings] - [Network/ Bluetooth Standby] is set to [Off]. Performing Easy Setup You can make basic initial settings, speaker settings, and network settings for the speaker system easily by performing Easy Setup. 1 2 3 4 46US Press HOME. The home menu appears on the TV screen.
Performing Advanced Settings Using the [Advanced Settings] Menu You can make various adjustments to items such as picture and sound on the [Advanced Settings] menu. 1 2 3 Press HOME. The home menu appears on the TV screen. Select [Setup] - [Advanced Settings] on the home menu. The [Advanced Settings] screen appears on the TV screen. Select the setting item. For details about the setting items, refer to Help Guide.
Updating the Software By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: • For customers in Americas https://www.sony.com/am/support • For customers in Europe https://www.sony.eu/support • For customers in Asia-Pacific, Oceania, Middle East, and Africa https://www.sony-asia.com/support Notes • It may take up to 20 minutes for the update to be completed.
(power) button on the bar speaker for 7 seconds. • If updating of the optional subwoofer or rear speakers does not work, move them to a location near the bar speaker and update.
2 Troubleshooting Troubleshooting If the speaker system does not work properly, handle it in the following order. 1 Search for the cause and solution of the issue on the Sony support site. Sony support site provides latest support information and Frequently Asked Questions. • For customers in Americas https://www.sony.com/am/ support • For customers in Europe https://www.sony.eu/support Search for the cause and solution of the issue by referring to these Operating Instructions or Help Guide.
Power The speaker system does not power up. Check that the AC power cord (mains lead) is connected securely. Disconnect the AC power cord (mains lead) from the wall outlet (mains), and then reconnect after several minutes. The speaker system does not turn on even when the TV is turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On]. The TV must support the Control for HDMI function (page 42). For details, refer to the operating instructions of your TV.
system far away from the TV/other wireless devices. There is an interference of the frequency band between the wireless LAN and the wireless connection of the optional speakers. Switch the band of the wireless LAN connection of the TV or device that is playing an image to 2.4 GHz. 3D content from the HDMI IN 1/2 jack does not appear on the TV screen. Depending on the TV or video device, 3D content may not appear. Check the supported HDMI video format. For details, refer to Help Guide.
No TV sound is output from the speaker system. Check the type and connection of an HDMI cable, TV center speaker mode cable, or optical digital cable that is connected to the speaker system and the TV (page 18). Disconnect the cables that are connected to the TV and the speaker system, then connect them firmly again. Disconnect the AC power cords (mains leads) of the TV and the speaker system from the AC outlets (mains), then connect them again.
The sound is interrupted while watching a TV program or content on a Blu-ray Disc, etc. Check the sound mode setting (page 37). If the sound mode is set to [Auto Sound], the sound may be interrupted when the sound mode is changed automatically according to the information of the program that is being played. If you do not want to change the sound mode automatically, set the sound mode to a setting other than [Auto Sound]. The TV sound from this speaker system lags behind the image.
subwoofer is too close or far away from each other, Sound Field Optimization cannot be performed properly. Adjust the distance between speakers and perform Sound Field Optimization again. If there is any obstacle between speakers or the microphone for measurement of the speaker is blocked by an obstacle, Sound Field Optimization cannot be performed properly. Remove it if there is any obstacle between speakers or in front of speakers. USB Device Connection The USB device is not recognized.
Headphones Connection with the BLUETOOTH Function Pairing cannot be achieved. Bring this speaker system and the BLUETOOTH headphones closer together. Make sure this speaker system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this speaker system. BLUETOOTH connection cannot be completed.
Others The Control for HDMI function does not work properly. Check the connection with the speaker system (page 18). Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV. Wait a while, and then try again. If you unplug the speaker system, it will take a while before operations can be made. Wait for 15 seconds or longer, and then try again. Make sure the devices connected to the speaker system support the Control for HDMI function.
operate properly. For the locations of the sensors and remote control receiver, refer to the operating instructions of the TV. Resetting the Speaker System Wireless functions (wireless LAN, the BLUETOOTH function, or optional subwoofer/rear speakers) are unstable. If the speaker system still does not operate properly, reset the speaker system as follows. Do not place metal objects other than a TV around the speaker system. 1 Music that you are not familiar with suddenly plays.
Additional Information Specifications Sound Bar (HT-A7000) Amplifier section U.S. models: POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 6 ohms loads, both channels driven, from 20 - 20k Hz; rated 33 W per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 mW to rated output. POWER OUTPUT (reference) Front L/Front R speaker blocks: 45.5 W (per channel at 6 ohms, 1 kHz) Front Inside L/Front Inside R speaker blocks: 45.
Maximum communication range Line of sight approx. 30 m1) Maximum number of devices to be registered 9 devices Frequency band 2.4 GHz band (2.4000 GHz 2.
Wireless Transmitter/ Receiver Section Communication system Wireless Sound Specification version 4.
Supported Input Audio Formats Supported audio formats differ depending on the input setting of the speaker system. “” indicates the supported audio format and “–” indicates the unsupported audio format in the table below. Format HDMI 1/2 input TV input (eARC) TV input (ARC) TV input (OPT) LPCM 2ch LPCM 5.1ch – – LPCM 7.
On BLUETOOTH Communication • BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
COPYRIGHT END USER LICENSE AGREEMENT IMPORTANT: BEFORE USING THE SOFTWARE, PLEASE READ THIS END USER LICENSE AGREEMENT (“EULA”) CAREFULLY. BY USING THE SOFTWARE YOU ARE ACCEPTING THE TERMS OF THIS EULA. IF YOU DO NOT ACCEPT THE TERMS OF THIS EULA, YOU MAY NOT USE THE SOFTWARE. This EULA is a legal agreement between you and Sony Electronics Inc. (“SONY”).
The software, network services or other products other than SOFTWARE upon which the SOFTWARE’S performance depends might be interrupted or discontinued at the discretion of the suppliers (software suppliers, service suppliers, or SONY). SONY and such suppliers do not warrant that the SOFTWARE, network services, contents or other products will continue to be available, or will operate without interruption or modification.
the SOFTWARE could lead to death, personal injury, or severe physical or environmental damage (“HIGH RISK ACTIVITIES”). SONY, each of the THIRDPARTY SUPPLIERS, and each of their respective affiliates specifically disclaim any express or implied warranty, duty or condition of fitness for HIGH RISK ACTIVITIES. EXCLUSION OF WARRANTY ON SOFTWARE You acknowledge and agree that use of the SOFTWARE is at your sole risk and that you are responsible for use of the SOFTWARE.
AUTOMATIC UPDATE FEATURE From time to time, SONY or the THIRDPARTY SUPPLIERS may automatically update or otherwise modify the SOFTWARE, including, but not limited to, for purposes of enhancement of security functions, error correction and improvement of functions, at such time as you interact with SONY’s or third parties’ servers, or otherwise.
UPGRADES/UPDATES OR BY ANY OTHER LEGALLY RECOGNIZABLE FORM OF NOTICE. If you do not agree to the amendment, you should promptly contact SONY for instructions. Your continued use of the SOFTWARE after the effective date of any such notice shall be deemed your agreement to be bound by such amendment. THIRD-PARTY BENEFICIARIES Each THIRD-PARTY SUPPLIER is an express intended third-party beneficiary of, and shall have the right to enforce, each provision of this EULA with respect to the SOFTWARE of such party.
• Do not place metal objects other than a TV around the speaker system. Wireless functions may be unstable. • If the speaker system is being used in combination with a TV, VCR, or tape deck, noise may result and picture quality may suffer. In such a case, place the speaker system away from the TV, VCR, or tape deck. • Use caution when placing the speaker system on a surface that has been specially treated (with wax, oil, polish, etc.), as staining or discoloration of the surface may result.
Copyrights and Trademarks This speaker system incorporates Dolby* Digital and the DTS** Digital Surround System. * Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Confidential unpublished works. Copyright © 2012–2020 Dolby Laboratories. All rights reserved. **For DTS patents, see http:// patents.dts.com. Manufactured under license from DTS, Inc.
48 kHz) or 909 kbps (88.2/44.1 kHz) is selected All other trademarks are trademarks of their respective owners. This product contains software that is subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or the LGPL.
Index Buttons R AUDIO 39 BLUETOOTH 27 DIMMER 45 IMMERSIVE AE 36 NIGHT 38 VOICE 38 Remote control 12 Resetting 58 A ARC 11 Audio files 61 Audio format 62 Audio Return Channel 11 S Settings Resetting 58 Setting item 47 Software update 48 Sound Mode 37 U USB device 29 B V BLUETOOTH Function 27 Pairing 27 “BRAVIA” Sync 43 Voice mode 38 Volume 35 C Connection (See “Wired connection” or “Wireless connection” in “Index”) Control for HDMI 42 D DTS Dialog control 40 E eARC 11 Easy Setup 46 Enhanced Audi
Sound Bar Startup Guide HT-A7000 5-024-830-11(1)
What’s in the box Bar speaker (1) Remote control (1) / R03 (size AAA) battery (2) AC power cord (mains lead) (1) (The shape of the plug differs depending on countries/regions) HDMI cable* (1) TV center speaker mode cable (1) Wall mounting bracket (2) / Screw (2) Sound Bar Sound Bar Startup Guide WALL MOUNT TEMPLATE (1) Operating Instructions * Supports the transmission of 4K/8K content.
1 Choose an installation method Mounting on a wall Installing on a shelf/stand For details, refer to the Operating Instructions (separate document). or Note • • • • Before connecting the speaker system, disconnect the AC power cords (mains leads) of the TV and AV devices from the AC outlets (mains). Reconnect them after step 3. Do not place metal objects near the speaker system. Wireless functions may become unstable. Do not cover the top of the speaker.
2 Connect a TV and another device Is there an HDMI IN jack labeled “eARC” or “ARC” on your TV? YES NO Optical digital cable (not supplied) HDMI cable (supplied) HDMI cable (supplied) ɟ ɞ HDMI cable (not supplied) HDMI cable (not supplied) ɠ ɠ Blu-ray Disc™ player, set-top box or gaming console, etc. ɞ Blu-ray Disc player, set-top box or gaming console, etc.
3 Set up the remote control 4 Turn on the TV and the speaker system ɞ ɟ AC power cord (mains lead) Power ON AC power cord (mains lead) (supplied) ɠ AC power cord (mains lead) (supplied) HELLO ɡ PLEASE WAIT TV Æ ̽ Connect the TV’s AC power cord (mains lead) to the AC outlet (mains). ̾ Connect the AC power cord (mains lead) to the AC inlet on the bar speaker. ̿ Connect the AC power cord (mains lead) to the AC outlet (mains).
5 Perform Initial Settings Initial Settings screen j//V/p/ HOME ̽ Press HOME to start Initial Settings. ̾ Press j//V/p and to select an item by following the on-screen instructions. ̿ Once [Setup is complete.] appears, select [Finish].
6 Listen to sound HDMI1 TV HDMI2 TV input switch To listen to the audio of the TV ̽ Select the desired input to the TV using the TV remote control. The screen switches to the selected input screen and the TV audio is output from the speaker system. If [TV] does not appear in the front panel display on the speaker system, press TV on the remote control of the speaker system to select the TV input. [TV] appears in the front panel display on the speaker system.
Help Guide Sound Bar HT-A7000 Use this Help Guide when you have any questions on how to use the speaker system.
Connecting a TV Compatible with ARC/eARC Connecting a TV That Is not Compatible with ARC/eARC When Your TV Has the S-CENTER SPEAKER IN Jack Connecting an AV Device Connecting an AV Device Compatible with the 2K/4K Video Format Connecting an AV Device Compatible with the 8K Video Format Connecting to the AC Outlet (mains) Performing Initial Settings When the TV Remote Control Does not Work Watching Images Watching TV Playing the Connected AV Device Listening to Music/Sound Listening to Sony TV Sound with
Setting up a Wireless Network Connection on the Home Menu Setting up a Wireless Network Connection Using Sony | Music Center Setting up a Wi-Fi Connection Using an iOS Device Enjoying 360 Reality Audio Using Spotify Streaming Music with Chromecast built-in Operating the Speaker System by Talking to an Alexa Built-in Device Streaming Music with an iOS Device Using Sony | Music Center Listening to Music on your PC via a Home Network Adjusting the Volume and Sound Quality Adjusting the Volume Enjoying Immers
Performing Easy Setup Performing Advanced Settings Using the [Advanced Settings] Menu [Speaker Settings] [Audio Settings] [HDMI Settings] [Bluetooth Settings] [System Settings] [Network Settings] [Resetting] [Software Update] Updating the Software Troubleshooting Troubleshooting Power The speaker system does not power up. The speaker system does not turn on even when the TV is turned on. The speaker system turns off when the TV is turned off.
The speaker system cannot connect to a TV with the BLUETOOTH function. No TV sound is output from the speaker system. Picture and sound of the device that is connected to the speaker system are not output from the TV when the speaker system is not turned on. The sound is output from both the speaker system and TV. The sound is interrupted while watching a TV program or content on a Blu-ray Disc, etc. The TV sound from this speaker system lags behind the image.
TV remote control does not work. Others The Control for HDMI function does not work properly. [PRTCT] flashes in the front panel display for 5 seconds and the speaker system is turned off. [PRTCT], [PUSH], speaker name ([SUB], [RL], or [RR]), and [POWER] flash alternately in the front panel display. [HIGH], [TEMP], and [ERROR] appear alternately for 2 seconds each in the front panel display, [STANDBY] appears in the front panel display, then the speaker system is turned off.
Help Guide Sound Bar HT-A7000 About Manuals of the Speaker System The information included in each manual is as shown below. Startup Guide Introduces the initial procedures concerning installation and connection for using the speaker system, and operations until you play music. Operating Instructions Explains the basic operations. Connection with a TV or other devices Playback for music/sound of devices connected with an HDMI cable or the BLUETOOTH function Sound adjustment, etc.
5-024-835-11(2) Copyright 2021 Sony Corporation 8
Help Guide Sound Bar HT-A7000 What You Can Do with the Speaker System The speaker system supports object-based audio formats such as Dolby Atmos and DTS:X as well as HDR video formats such as HDR10, HLG, and Dolby Vision. Wireless LAN router Internet Optional rear speakers Optional subwoofer TV You can listen to sound of a TV with the speaker system by connecting the speaker system and TV with an HDMI cable or BLUETOOTH function.
Headphones You can listen to sound of the connected TV or AV device from headphones by connecting the speaker system and headphones with the BLUETOOTH function. Listening to Sound by Pairing with Headphones Network You can perform streaming playback of music content or play music files stored on your PC with the speaker system by connecting the speaker system to the same network as that of the smartphone, tablet, or iOS device.
Help Guide Sound Bar HT-A7000 Bar Speaker Front 1. (power) button Turns on the speaker system or sets it to standby mode. 2. (input select) button Selects the input for playback on the speaker system. 3. BLUETOOTH button 4. (MUSIC SERVICE) button If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button. This button may not be available in some countries/regions. 5. +/– (volume) buttons 6. Top speakers Output the sound upward.
1. IR repeater Transmits the remote signal of the TV remote control to the TV. 2. S-CENTER OUT jack 3. (USB) port 4. HDMI OUT (TV (eARC/ARC)) jack Connect a TV that has an HDMI input jack with an HDMI cable. The speaker system is compatible with eARC and ARC. ARC is the function that sends TV sound to an AV device such as the speaker system from the TV’s HDMI jack. eARC is an extension of ARC and enables transmission of the object audio and multi-channel LPCM content that cannot be transmitted with ARC.
5-024-835-11(2) Copyright 2021 Sony Corporation 13
Help Guide Sound Bar HT-A7000 Remote Control 1. (power) Turns on the speaker system or sets it to standby mode. (MUSIC SERVICE) button If you have previously played music on Spotify on the speaker system, you can resume playback by pressing this button. This button may not be available in some countries/regions. BLUETOOTH TV HDMI1 HDMI2 USB ANALOG 2.
3. DIMMER DISPLAY Displays playback information on the TV screen. Playback information is displayed in the front panel display for TV input. 4. (up)/ (down)/ (left)/ (right) (enter) BACK OPTIONS Displays the options menu on the TV screen. The options menu is displayed in the front panel display for TV input. HOME 5. REAR (rear speakers volume) +/– Adjusts the volume of the optional rear speakers when connecting them. (volume) +(*)/– Adjusts the volume.
Help Guide Sound Bar HT-A7000 Using the Home Menu You can display the home menu on the TV screen by connecting the speaker system and TV with an HDMI cable. 1 Press HOME. The home menu appears on the TV screen. 2 Press (enter). (up)/ (left)/ (right) to select the category that you want, then press (down) or The items for the selected category appear under the category list on the TV screen. [Watch]: Selects the input of the TV or AV device that is connected to the speaker system.
Help Guide Sound Bar HT-A7000 Installing the Bar Speaker Install the bar speaker in the same location as your TV. The bar speaker can be installed on a shelf, such as a TV stand, or mounted on a wall. Installing on a shelf/stand Install the bar speaker in an empty space in front of the TV. Mounting on a wall Mount the bar speaker on the wall under the TV. To set up with the optional subwoofer and/or rear speakers Complete the setup of the speaker system following the Startup Guide.
Note Before connecting the speaker system, disconnect the AC power cords (mains leads) of the TV and AV devices from the AC outlets (mains). Reconnect them after connecting the speaker system to a TV and AV devices. Do not place metal objects near the speaker system. Wireless functions may become unstable. Do not cover the top of the speaker. It may interrupt the sound output from the top of the speaker. There are ventilation holes at the rear of the speaker.
Help Guide Sound Bar HT-A7000 Mounting the Bar Speaker on a Wall Bar speaker Note Prepare screws (not supplied) that are suitable for the wall material and stability. Depending on the wall material, the wall may be damaged. Fasten the screws securely in the wall beam. Hang the bar speaker horizontally on the reinforced wall. Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation.
Space is required to ensure that the TV does not interfere with the output surround sound from the bar speaker towards the ceiling. TV Bar speaker 3 Depth of the mounted TV (e) Required space between the bottom of the TV and the top of the bar speaker (f) Less than 110 mm (4 3/8 in) 120 mm (4 3/4 in) or more 110 mm (4 3/8 in) or more 200 mm (7 7/8 in) or more Align the vertical line above the “ TV CENTER LINE” printed on the WALL MOUNT TEMPLATE (supplied) with the center of the width of your TV.
WALL MOUNT TEMPLATE Adhesive tape, etc. 5 Fasten the screws prepared in step 1 securely into the screw marks on the “ on the WALL MOUNT TEMPLATE. Screws Marks (g) 387 mm (15 1/4 in) (h) 2.0 mm to 3.0 mm (approx. 1/8 in) 6 Remove the WALL MOUNT TEMPLATE. 7 Hang the wall mounting brackets on the screws on the wall.
Wall mounting bracket 8 Put the bar speaker on the wall mounting brackets. 9 Align the positions of the screw hole on the bottom of the bar speaker and hole of the wall mounting bracket, then fix the bar speaker to the wall mounting brackets by fastening the screws (supplied) securely.
Note When adhering the WALL MOUNT TEMPLATE on the wall, smooth it out fully. Make sure to use the supplied wall mounting brackets when mounting the bar speaker on a wall. Do not mount the bar speaker on a wall directly. The temperature inside the bar speaker rises considerably, and it may cause damage or malfunction.
Help Guide Sound Bar HT-A7000 Connecting a TV Compatible with ARC/eARC 1 Connect the HDMI IN jack compatible with ARC/eARC on the TV and HDMI OUT (TV (eARC/ARC)) jack on the speaker system with the HDMI cable (supplied). HDMI cable (supplied) TV Note Make sure that the connectors are firmly inserted. Enable the Control for HDMI function on the TV. If the Control for HDMI function on the TV is not enabled, TV sound will not be output from the speaker system.
Help Guide Sound Bar HT-A7000 Connecting a TV That Is not Compatible with ARC/eARC 1 Connect the HDMI IN jack on the TV and HDMI OUT (TV (eARC/ARC)) jack on the speaker system with the HDMI cable (supplied). HDMI cable (supplied) TV 2 Connect the optical digital output jack on the TV and the TV IN (OPT) jack on the speaker system with an optical digital cable (not supplied).
TV Optical digital cable (not supplied) Note Make sure that the connectors are firmly inserted. Insert a plug of the optical digital cable in the correct direction by checking the shape of the plug and connector on the bar speaker and TV. If the plug is forcibly inserted in the wrong direction, the connector and plug may be damaged.
Help Guide Sound Bar HT-A7000 When Your TV Has the S-CENTER SPEAKER IN Jack You can output the center part of the speaker system sound from the TV by connecting the TV with the following method. 1 Connect the speaker system and TV with the HDMI cable (supplied). 2 Connect the S-CENTER SPEAKER IN jack on the TV and the S-CENTER OUT jack on the speaker system with the TV center speaker mode cable (supplied).
Connecting a TV That Is not Compatible with ARC/eARC 5-024-835-11(2) Copyright 2021 Sony Corporation 28
Help Guide Sound Bar HT-A7000 Connecting an AV Device Compatible with the 2K/4K Video Format You can output sound such as Dolby Atmos, Dolby TrueHD, and DTS:X in high quality by connecting an AV device to the speaker system. 1 Connect the HDMI OUT jack on the AV device and HDMI IN 1 or HDMI IN 2 jack on the speaker system with an HDMI cable (not supplied). HDMI cable (not supplied) Blu-ray Disc player, set-top box, gaming console, etc. Note Make sure that the connectors are firmly inserted.
5-024-835-11(2) Copyright 2021 Sony Corporation 30
Help Guide Sound Bar HT-A7000 Connecting an AV Device Compatible with the 8K Video Format When you connect an AV device with the following methods, you can play 8K video and high quality sound such as Dolby Atmos, Dolby TrueHD, or DTS:X. 1 Connect the speaker system and TV with the HDMI cable (supplied). 2 Check that the eARC compatible HDMI IN jack on the TV is compatible with the 8K video input. Refer to the operating instructions of the TV. 3 Connect an AV device with one of the following methods.
HDMI cable (not supplied) Blu-ray Disc player, set-top box, gaming console, etc. When the eARC compatible HDMI IN jack on the TV does not support the 8K video input: Connect the HDMI OUT jack on an AV device to the HDMI IN jack compatible with the 8K video input on a TV with an HDMI cable (not supplied). Make sure that the eARC function of the TV is on. TV Compatible with 8K video input HDMI cable (not supplied) Blu-ray Disc player, set-top box, gaming console, etc.
Help Guide Sound Bar HT-A7000 Connecting to the AC Outlet (mains) 1 Connect the AC power cord (mains lead) (supplied) to the AC inlet on the bar speaker, then connect to the AC outlet (mains).
Help Guide Sound Bar HT-A7000 Performing Initial Settings 1 Press (power) on the remote control supplied with the speaker system to turn on the speaker system. Operate the remote control by pointing it toward the front of the bar speaker. When the speaker system turns on, [TV] appears in the front panel display. 2 Turn on the TV. 3 Press HOME, then perform initial settings by following the on-screen instructions.
Depending on the order in which you turn on the TV and the speaker system, the speaker system may be muted and [MUTING] is displayed on the front panel display of the speaker system. If this happens, turn all devices off, then turn on the speaker system after turning on the TV.
Help Guide Sound Bar HT-A7000 When the TV Remote Control Does not Work When the bar speaker obstructs the remote control sensor of the TV, the TV remote control may not work. In that case, enable the IR repeater function of the speaker system. You can control the TV with the TV remote control by sending the remote signal from the rear of the bar speaker. 1 Press HOME. The home menu appears on the TV screen. 2 Select 3 Select [System Settings] - [IR-Repeater].
Help Guide Sound Bar HT-A7000 Watching TV 1 Press HOME. The home menu appears on the TV screen. 2 Select 3 Select the program using the TV remote control. [Watch] - [TV] on the home menu. The selected TV program appears on the TV screen and the TV sound is output from the speaker system. 4 Adjust the volume. Note When the bar speaker obstructs the remote control sensor of the TV and you cannot operate the TV by the TV remote control, enable the IR repeater function of the speaker system.
Help Guide Sound Bar HT-A7000 Playing the Connected AV Device 1 Press HOME. The home menu appears on the TV screen. 2 Select [Watch], then select the input ([HDMI1] or [HDMI2]) on the home menu. [HDMI1]: Device that is connected to the HDMI IN 1 jack [HDMI2]: Device that is connected to the HDMI IN 2 jack The image of the selected device appears on the TV screen and the sound is output from the speaker system. 3 Adjust the volume.
Help Guide Sound Bar HT-A7000 What You Can Do by Connecting a TV with the BLUETOOTH Function When using Sony TV(*) with the BLUETOOTH function, you can listen to sound of the TV or device that is connected to the TV by connecting the speaker system and TV wirelessly. * The TV needs to be compatible with A2DP (Advanced Audio Distribution Profile) of the BLUETOOTH profile. Sony TV Blu-ray Disc player, set-top box, gaming console, etc.
Help Guide Sound Bar HT-A7000 Listening to TV Sound by Connecting the Speaker System and TV Wirelessly You need to perform pairing of the speaker system and TV by using the BLUETOOTH function. Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly in advance. 1 Turn on the TV. 2 Press 3 Press and hold the BLUETOOTH button on the bar speaker and TV on the remote control simultaneously for 5 seconds. (power) to turn on the speaker system.
6 Pair the speaker system and TV by selecting “HT-A7000” from the list on the TV screen. 7 Make sure that the BLUETOOTH indicator on the bar speaker lights in blue and [TV (BT)] appears in the front panel display. A connection between the speaker system and TV has been established. 8 Select the program or input of the device by using the TV remote control. The sound of the displayed image on the TV screen is output from the speaker system.
Help Guide Sound Bar HT-A7000 Listening to Sound of the Paired TV 1 Turn on the TV with the TV remote control. The speaker system is turned on by interlocking with the TV power and TV sound is output from the speaker system. 2 Select the program or input of the device by using the TV remote control. The sound of the displayed image on the TV screen is output from the speaker system. 3 Adjust the volume of the speaker system by using the TV remote control.
5-024-835-11(2) Copyright 2021 Sony Corporation 43
Help Guide Sound Bar HT-A7000 Listening to Music by Pairing the Mobile Device That Is Connected for the First Time To use the BLUETOOTH function, you need to perform pairing of the speaker system and mobile device in advance. 1 Press and hold the BLUETOOTH button for 2 seconds. 2 Make sure that the BLUETOOTH indicator on the bar speaker flashes quickly in blue and [PAIRING] appears in the front panel display. The speaker system enters the pairing mode.
6 Start audio playback with the music app on the connected mobile device. Sound is output from the speaker system. 7 Adjust the volume. You can play or pause the content by using the playback operation buttons on the remote control.
Help Guide Sound Bar HT-A7000 Listening to Music from the Paired Device 1 Turn the BLUETOOTH function of the mobile device to on. 2 Press the BLUETOOTH button. The speaker system automatically reconnects to the mobile device it was most recently connected to. 3 Make sure that the BLUETOOTH indicator on the bar speaker lights in blue and [BT] appears in the front panel display. A connection between the speaker system and mobile device has been established.
Perform any of the following items. Disable the BLUETOOTH function on the mobile device. Press the BLUETOOTH button while the [Bluetooth Audio] screen appears on the TV screen. Set [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Transmitter] or [Off]. Turn off the speaker system or mobile device.
Help Guide Sound Bar HT-A7000 Listening to Music on a USB Device You can play music files stored on a connected USB device. 1 Connect the USB device to the 2 Press HOME. (USB) port. The home menu appears on the TV screen. 3 Select 4 Select the folder on which songs are stored, then select a song. [Listen] - [USB (Connected)] on the home menu. The selected song is played and sound is output from the speaker system. 5 Adjust the volume. Note Do not remove the USB device during operation.
Plays the previous or next music file. You can also operate by using (previous)/ (Shuffle play) Shuffles the playback order. Each time you press (next) on the remote control. (enter), on/off of the shuffle play is switched. (Repeat play) Press (enter) repeatedly to switch the repeat mode. Repeat mode (Repeat all) Explanation Repeats all music files. (Repeat folder) Repeats all music files in a folder. (Repeat one) Repeats a music file that is being played. (Off) Cancels the repeat play.
Help Guide Sound Bar HT-A7000 Listening to the Device Connected with an Analog Audio Cable You can listen to sound of an audio device such as a WALKMAN®, etc. that is connected to the ANALOG IN jack on the bar speaker. 1 Connect an audio device to the ANALOG IN jack. Analog audio cable (not supplied) Smartphone, WALKMAN®, other audio devices, etc. 2 Press HOME. The home menu appears on the TV screen. 3 Select [Listen] - [Analog] on the home menu. The [Analog] screen is displayed on the TV screen.
Help Guide Sound Bar HT-A7000 Listening to Sound by Pairing with Headphones 1 Set the BLUETOOTH compatible headphones to pairing mode. Refer to the operating instructions of the headphones for the pairing method. 2 Press HOME. The home menu appears on the TV screen. 3 Select 4 Select [Bluetooth Settings] - [Bluetooth Mode] - [Transmitter]. [Setup] - [Advanced Settings] on the home menu. The speaker system enters BLUETOOTH transmission mode.
5-024-835-11(2) Copyright 2021 Sony Corporation 52
Help Guide Sound Bar HT-A7000 Listening to Sound with Paired Headphones 1 Set the BLUETOOTH function of the headphones to on. 2 Press HOME. The home menu appears on the TV screen. 3 Select 4 Select [Bluetooth Settings] - [Bluetooth Mode] - [Transmitter]. [Setup] - [Advanced Settings] on the home menu. The speaker system enters BLUETOOTH transmission mode and the speaker system automatically reconnects to the headphones that was most recently connected to.
Help Guide Sound Bar HT-A7000 About the Connection of the Headphones You may not be able to adjust the volume level depending on the BLUETOOTH compatible headphones. Input of BLUETOOTH is disabled when [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] is set to [Off] or [Transmitter]. You can register up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is registered, the oldest connected BLUETOOTH device will be overwritten by the new one.
Help Guide Sound Bar HT-A7000 What You Can Do by Connecting the Speaker System to a Network You can perform streaming playback of music content via the speaker system by operating a smartphone, tablet, or iOS device, or play music stored on a computer via the speaker system by connecting to the network. The Wi-Fi port of the speaker system has a router function which can forward audio data to another Sony audio product.
Note The server needs to be connected to the same network as that of the speaker system.
Help Guide Sound Bar HT-A7000 Setting up a Wireless Network Connection on the Home Menu Check the following information in advance. The network name (SSID)(*) The security key (password)(**) * ** 1 SSID (Service Set Identifier) is a name that identifies a particular access point.
Help Guide Sound Bar HT-A7000 Setting up a Wireless Network Connection Using Sony | Music Center Sony | Music Center can connect the speaker system to the same wireless network as that of the mobile device. For details, follow the instruction of the app or refer to the following URL. https://www.sony.
Help Guide Sound Bar HT-A7000 Setting up a Wi-Fi Connection Using an iOS Device The speaker system is compatible with Apple Setup. Using this function, you can connect the speaker system to the same network that connects your iOS device via Wi-Fi without entering the network name and password. 1 Press HOME on the remote control supplied with the speaker system. The home menu appears on the TV screen. 2 Select 3 Select [Network Settings]. [Setup] - [Advanced Settings] on the home menu.
Help Guide Sound Bar HT-A7000 Enjoying 360 Reality Audio The speaker system is compatible with 360 Reality Audio. You can play 360 Reality Audio contents on the speaker system by selecting it on the streaming service app compatible with 360 Reality Audio. For details about 360 Reality Audio, refer to the following URL. https://www.sony.
Related Topic [System Settings] 5-024-835-11(2) Copyright 2021 Sony Corporation 61
Help Guide Sound Bar HT-A7000 Using Spotify You can select music on the Spotify app and play it on the speaker system. Playing music on the speaker system by using the “Spotify Connect” function Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Hint If [Network/Bluetooth Standby] is set to [On], you can play music quickly even when the speaker system is in standby mode.
Help Guide Sound Bar HT-A7000 Streaming Music with Chromecast built-in The speaker system is compatible with Chromecast built-in, which can stream music to the speaker from the mobile device. You can select music content from a Chromecast-enabled app and play audio content on the speaker system or group that includes the speaker system. Controlling your music with a mobile device 1 Press HOME. The home menu appears on the TV screen. 2 Select [Listen] - [Chromecast built-in] on the home menu.
Hint An image such as an album cover appears in the playback screen if the played content supports the feature.
Help Guide Sound Bar HT-A7000 Operating the Speaker System by Talking to an Alexa Built-in Device Alexa is Amazon’s cloud-based voice service. You can play the sound on the speaker system by talking to an Alexa builtin device. To use this function, you will need to connect your Amazon account to the Alexa built-in device.
Help Guide Sound Bar HT-A7000 Streaming Music with an iOS Device The speaker system is compatible with AirPlay 2. You can select music content on an iOS device such as iPhone, iPad, and iPod touch and stream it to the speaker system. 1 Connect the iOS device by Wi-Fi to the same network as that of the speaker system. 2 Play the music you want to stream on the iOS device. 3 Display the AirPlay icon ( 4 Select the speaker system as the speaker to stream to on the iOS device.
Help Guide Sound Bar HT-A7000 Using Sony | Music Center Sony | Music Center is an application for controlling compatible Sony audio devices using the mobile device such as a smartphone or tablet. For details about Sony | Music Center, refer to the following URL. https://www.sony.net/smcqa/ 1 Install the free Sony | Music Center app on your mobile device. 2 Connect the mobile device via Wi-Fi to the same network as that of the speaker system. 3 Start Sony | Music Center.
Help Guide Sound Bar HT-A7000 Listening to Music on your PC via a Home Network You can play music files stored on your PC via your home network. Music files can be played by operating Sony | Music Center on a mobile device such as a smartphone or tablet. PC Wireless LAN router Smartphone or tablet 1 Connect the speaker system to a network. 2 Connect the PC to a network. For details, refer to the operating instructions of the PC. 3 Set the PC.
Setting up a Wireless Network Connection on the Home Menu Setting up a Wireless Network Connection Using Sony | Music Center Setting up a Wi-Fi Connection Using an iOS Device 5-024-835-11(2) Copyright 2021 Sony Corporation 69
Help Guide Sound Bar HT-A7000 Adjusting the Volume To adjust the speaker system volume Press (volume) +/–. The volume level appears in the front panel display. To adjust the subwoofer volume Press SW (subwoofer volume) +/–. The volume level appears in the front panel display. Note The subwoofer is designed for playback of bass or low frequency sound. When the input source, such as in TV programs, does not contain much bass sound, the bass sound from the subwoofer may be difficult to hear.
Help Guide Sound Bar HT-A7000 Enjoying Immersive Surround Experience (IMMERSIVE AE) You can feel immersed by the sound from not only the horizontal direction, but also from the upward direction by working sound modes effectively. This function also works for the 2.0 channel signal such as TV programs. 1 Press IMMERSIVE AE to set the function on or off. The Immersive Audio Enhancement setting appears on the TV screen. [Immersive Audio Enhancement: On]: Activates the Immersive Audio Enhancement function.
Help Guide Sound Bar HT-A7000 Setting the Sound Effect That Is Tailored to Sound Sources (Sound Mode) You can easily enjoy pre-programmed sound effects that are tailored to different kinds of sound sources. This function works when [Setup] - [Advanced Settings] - [Audio Settings] - [Sound Effect] is set to [Sound Mode On]. 1 Press AUTO SOUND, CINEMA, MUSIC, or STANDARD to select the sound mode. The selected sound mode appears on the TV screen.
Help Guide Sound Bar HT-A7000 Making Dialogs Clearer (VOICE) 1 Press VOICE to set the function on or off. The voice mode setting appears on the TV screen. [Voice: On]: Dialog is easily heard by enhancing dialog range. [Voice: Off]: Deactivates the voice mode function. Note The voice mode setting does not appear on the TV screen while the TV input is selected. In this case, you can check the voice mode setting in the front panel display.
Help Guide Sound Bar HT-A7000 Enjoying Clear Sound with Low Volume at Midnight (NIGHT) 1 Press NIGHT to set the function on or off. The night mode setting appears on the TV screen. [Night: On]: Sound is output at low volume with minimum loss of fidelity and clarity of dialog. [Night: Off]: Deactivates the night mode function. Note When you turn the speaker system off, this setting is set to [Night: Off] automatically.
Help Guide Sound Bar HT-A7000 When Watching the TV 1 Press OPTIONS. [SYNC] appears in the front panel display. 2 Press (right) or (enter). The adjusting time appears in the front panel display. 3 Adjust the delay using (up)/ (down), then press (enter). You can adjust from 0 msec to 300 msec in 25 msec increments. 4 Press OPTIONS. The options menu in the front panel display turns off.
Help Guide Sound Bar HT-A7000 When Watching Another Device 1 Press OPTIONS. The options menu appears on the TV screen. 2 Select [A/V sync]. 3 Adjust the delay using (up)/ (down), then press (enter). You can adjust from 0 msec to 300 msec in 25 msec increments. Hint If your TV has a function that adjusts the delay between the picture and sound, use it for adjustment. For details, refer to the operating instructions of the TV.
Help Guide Sound Bar HT-A7000 Enjoying Multiplex Broadcast Sound (AUDIO) You can enjoy multiplex broadcast sound when the speaker system receives a Dolby Digital multiplex broadcast signal. 1 Press AUDIO repeatedly to select the desired audio signal. The audio signal appears on the TV screen. [Audio: Main]: Sound of the main language is output. [Audio: Sub]: Sound of the sub language is output. [Audio: Main/Sub]: Main sound is output from the left speaker and sub sound is output from the right speaker.
Help Guide Sound Bar HT-A7000 When Watching the TV By adjusting the dialog volume, you can easily listen to dialog since it stands out from the ambient noise. This function works while playing content that is compatible with the DTS:X dialog control function. The setting method differs depending on the input. 1 Press OPTIONS, display [DIALOG] in the front panel display using (enter). 2 Adjust the dialog volume using (up)/ (down), then press (up)/ (enter). You can adjust from 0.0 dB to 6.
Help Guide Sound Bar HT-A7000 When Playing Content on an AV Device By adjusting the dialog volume, you can easily listen to dialog since it stands out from the ambient noise. This function works while playing content that is compatible with the DTS:X dialog control function. The setting method differs depending on the input. 1 Press OPTIONS. The options menu appears on the TV screen. 2 Select [DTS Dialog Control]. 3 Adjust the dialog volume using (up)/ (down), then press (enter).
Help Guide Sound Bar HT-A7000 Operating the Speaker System by Interlocking with a TV (Control for HDMI Function) Connecting a TV compatible with the Control for HDMI function using an HDMI cable enables you to interlock the speaker system operation such as power on/off or volume adjustment with a TV. About the Control for HDMI function The Control for HDMI function is a function that enables operation of devices connected with an HDMI (High-Definition Multimedia Interface) cable by interlocking them.
If you turn off the speaker system before turning off the TV, the speaker system may not turn on automatically even though you turn on the TV next time. In this case, perform the following operation. Select the speaker system for the sound output device in the TV menu. When using Sony TV, turn on the speaker system while the TV is turned on. Volume adjustment The sound of the TV you are watching is output from the speaker system automatically.
Help Guide Sound Bar HT-A7000 Operating the Speaker System by Interlocking with a TV Compatible with the “BRAVIA” Sync Function “BRAVIA” Sync is an extended function developed by Sony based on the Control for HDMI function. By connecting “BRAVIA” Sync-compatible devices such as a TV or a Blu-ray Disc player using an HDMI cable, you can control the devices by interlocking them with each other. To use “BRAVIA” Sync “BRAVIA” Sync is enabled by enabling the Control for HDMI function of the Sony device.
Help Guide Sound Bar HT-A7000 Changing the Brightness of the Front Panel Display and Indicators (DIMMER) You can change the brightness of the front panel display and BLUETOOTH indicator. The brightness of the power indicator for the optional subwoofer and rear speakers also changes. 1 Press DIMMER repeatedly to select the desired display mode. The display mode appears on the TV screen. [Dimmer: Bright]: The front panel display and indicators light brightly.
Help Guide Sound Bar HT-A7000 Saving Power in Standby Mode Check that you have made the following settings: [Setup] - [Advanced Settings] - [HDMI Settings] - [Standby Through] is set to [Off]. [Setup] - [Advanced Settings] - [System Settings] - [Network/Bluetooth Standby] is set to [Off].
Help Guide Sound Bar HT-A7000 Performing Easy Setup You can make basic initial settings, speaker settings, and network settings for the speaker system easily by performing Easy Setup. 1 Press HOME. The home menu appears on the TV screen. 2 Select [Setup] - [Easy Setup] on the home menu. The [Easy Setup] screen appears on the TV screen. 3 Select the desired setting. [Easy Initial Setup]: Performs the basic initial settings including the speaker settings and network settings.
Help Guide Sound Bar HT-A7000 Using the [Advanced Settings] Menu You can make various adjustments to items such as picture and sound on the [Advanced Settings] menu. 1 Press HOME. The home menu appears on the TV screen. 2 Select [Setup] - [Advanced Settings] on the home menu. The [Advanced Settings] screen appears on the TV screen. 3 Select the setting item. [Speaker Settings]: Makes the speakers settings for installing and connections. [Audio Settings]: Makes the audio output settings.
Help Guide Sound Bar HT-A7000 [Speaker Settings] [Speaker Settings Information] You can apply the [Sound Field Optimization] measured value, or the [Manual Speaker Settings] value to speaker settings. To perform this setting, execute [Sound Field Optimization]. [Sound Field Optimization value]: Applies the [Sound Field Optimization] measured value to speaker settings. [Manual Speaker Settings value]: Applies the [Manual Speaker Settings] value to speaker settings.
Set the distance from the speaker to the ceiling. [Front]: Sets the front speaker distance. You can set the value from 1 m to 5 m (0.1 m step) (3.25 ft to 16.5 ft (1/4 ft step)). [Rear Speaker (L)](*1): Selects the optional left rear speaker distance. [Rear Speaker (R)](*1): Selects the optional right rear speaker distance. *1 This item appears when using the optional rear speakers. [Distance to a side wall] Set the distance to a side wall. You can set the value from 0.5 m to 10 m (0.1 m step) (1.
[TV Center Speaker Settings] If you connect the speaker system and TV with the HDMI cable (supplied) and the TV center speaker mode cable (supplied), you can output the center speaker portion of the speaker system sound from the TV. Set [Control for HDMI] to [On]. [TV Center Speaker Mode] [On]: Uses a TV compatible with this feature as the center speaker.
Help Guide Sound Bar HT-A7000 [Audio Settings] [DSEE Extreme] This function is only available when [Auto Sound](*) or [Music] is selected as the sound mode. [On]: Upscales your compressed music accurately using AI technology, and it makes you feel as if you are in a recording studio or at a concert. [Off]: Off * Only when [Music] is selected with [Auto Sound]. Note This function is compatible with the 2-channel digital input signals of 44.1 kHz or 48 kHz sampling frequency.
Related Topic Setting the Sound Effect That Is Tailored to Sound Sources (Sound Mode) Enjoying Immersive Surround Experience (IMMERSIVE AE) 5-024-835-11(2) Copyright 2021 Sony Corporation 91
Help Guide Sound Bar HT-A7000 [HDMI Settings] [Control for HDMI] [On]: The Control for HDMI function is enabled. Devices connected with an HDMI cable can control each other. [Off]: Off [Standby Linked to TV] This function is available when you set [Control for HDMI] to [On]. [Auto]: If the input of the speaker system is [TV] or [HDMI], the speaker system turns off automatically when you turn off the TV. [On]: The speaker system turns off automatically when you turn off the TV regardless of the input.
be transmitted with ARC by connecting the speaker system and TV compatible with eARC using an HDMI cable. For the connection, see “Connecting a TV Compatible with ARC/eARC .” [HDMI Signal Format] You can select the video format that can be received. If the picture and sound of the device connected to the speaker system are not output correctly, change the [HDMI Signal Format] setting.
Help Guide Sound Bar HT-A7000 [Bluetooth Settings] [Bluetooth Mode] You can enjoy content from a BLUETOOTH device by using this speaker system or listen to sound from this speaker system by using BLUETOOTH compatible headphones. [Receiver]: This speaker system is in receiver mode, which enables it to receive and output audio from the BLUETOOTH device. [Transmitter]: This speaker system is in transmitter mode, which enables it to send audio to the BLUETOOTH compatible headphones.
Help Guide Sound Bar HT-A7000 [System Settings] [Language] You can select the language you want for the speaker system on-screen display. [IR-Repeater] [On]: Remote signals for the TV are sent from the rear of the bar speaker. [Off]: Turns off the function. [Network/Bluetooth Standby] [On]: You can turn the speaker system on via the network or BLUETOOTH function. [Off]: You can save power in standby mode.
5-024-835-11(2) Copyright 2021 Sony Corporation 96
Help Guide Sound Bar HT-A7000 [Network Settings] [Wi-Fi Connection] [On]: Enables Wi-Fi connection of the speaker system. [Off]: Disables Wi-Fi connection of the speaker system. [Internet Settings] You can set the network settings and check the network connections. [Network Connection Status] You can display the current network connection status. [Software Update Notification] [On]: Sets the speaker system to inform you of the latest software version information.
[Chromecast built-in] You can set sharing of usage data and confirm the Chromecast built-in feature. [Share usage data] [On]: Provides information related to the use of the cast feature to Google. [Off]: Off [About Chromecast built-in] Displays the reference URLs for the Chromecast built-in feature.
Help Guide Sound Bar HT-A7000 [Resetting] You can reset the speaker system settings to the factory default by selecting the group of settings. All the settings within the group will be reset.
Help Guide Sound Bar HT-A7000 [Software Update] You can update the software of the speaker system or optional subwoofer/rear speakers.
Help Guide Sound Bar HT-A7000 Updating the Software By updating your software to the latest version, you can take advantage of the newest functions. For information about update functions, visit the following website: For customers in Americas https://www.sony.com/am/support For customers in Europe https://www.sony.eu/support For customers in Asia-Pacific, Oceania, Middle East, and Africa https://www.sony-asia.com/support Note It may take up to 20 minutes for the update to be completed.
[Network Update] Updates the software using the available network. Make sure that the network is connected to the Internet. [USB Update] Updates the software using a USB memory. For details on updating, refer to the instructions that are displayed when downloading the update file. [Wireless Speakers Update] Updates the software of the optional subwoofer and rear speakers when the software of the speaker system is the latest version.
Help Guide Sound Bar HT-A7000 Troubleshooting If the speaker system does not work properly, handle it in the following order. 1. Search for the cause and solution of the issue by referring to these Help Guide or Operating Instructions. The troubleshooting method is listed in “Troubleshooting.” 2. Search for the cause and solution of the issue on the Sony support site. Sony support site provides latest support information and Frequently Asked Questions. For customers in Americas https://www.sony.
Help Guide Sound Bar HT-A7000 The speaker system does not power up. Check that the AC power cord (mains lead) is connected securely. Disconnect the AC power cord (mains lead) from the wall outlet (mains), and then reconnect after several minutes.
Help Guide Sound Bar HT-A7000 The speaker system does not turn on even when the TV is turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On]. The TV must support the Control for HDMI function. For details, refer to the operating instructions of your TV. Check the speaker settings of the TV. The speaker system power syncs with the speaker settings of the TV. For details, refer to the operating instructions of your TV.
Help Guide Sound Bar HT-A7000 The speaker system turns off when the TV is turned off. Check the setting of [Setup] - [Advanced Settings] - [HDMI Settings] - [Standby Linked to TV]. When [Standby Linked to TV] is set to [On] or [Auto], the speaker system turns off automatically when you turn off the TV.
Help Guide Sound Bar HT-A7000 The speaker system does not turn off even when the TV is turned off. Check the setting of [Setup] - [Advanced Settings] - [HDMI Settings] - [Standby Linked to TV]. To turn the speaker system off automatically, regardless of the input when you turn off the TV, set [Standby Linked to TV] to [On]. The TV must support the Control for HDMI function. For details, refer to the operating instructions of your TV.
Help Guide Sound Bar HT-A7000 The speaker system cannot be turned off. The speaker system may be in demo mode. To cancel demo mode, reset the speaker system. Press and hold (power) and – (volume) on the bar speaker for more than 5 seconds.
Help Guide Sound Bar HT-A7000 There is no picture or the picture is not output correctly. Select the appropriate input. When there is no picture while the TV input is selected, select the TV channel that you want using the TV remote control. When there is no picture while the HDMI input is selected, press the playback button of the connected device. Disconnect an HDMI cable, then connect it again. Make sure that the cable is firmly inserted.
Help Guide Sound Bar HT-A7000 The picture on the TV screen is distorted. Interference of the wireless function between the TV/other wireless devices and the speaker system may have occurred. Install the speaker system far away from the TV/other wireless devices. There is an interference of the frequency band between the wireless LAN and the wireless connection of the optional speakers. Switch the band of the wireless LAN connection of the TV or device that is playing an image to 2.4 GHz.
Help Guide Sound Bar HT-A7000 3D content from the HDMI IN 1/HDMI IN 2 jack does not appear on the TV screen. Depending on the TV or video device, 3D content may not appear. Check the supported HDMI video format.
Help Guide Sound Bar HT-A7000 High definition video signal (4K/60p 4:4:4, 4:2:2 and 4K/60p 4:2:0 10 bit, etc.) from the HDMI IN 1/HDMI IN 2 jack does not appear on the TV screen. Depending on the TV or the video device, high definition video signals such as 4K may not appear. Check the video capability and settings of your TV and video device.
Help Guide Sound Bar HT-A7000 An image is not displayed on the entire TV screen. The aspect ratio on the media is fixed.
Help Guide Sound Bar HT-A7000 Picture and sound of the device that is connected to the speaker system are not output from the TV when the speaker system is not turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On] on the speaker system, and then set [Standby Through] to [Auto] or [On]. Turn on the speaker system, and then switch the input for the device playing.
Help Guide Sound Bar HT-A7000 HDR contents cannot be shown in high-dynamic range. Check the settings of the TV and connected device. For details, refer to the operating instructions of your TV and the connected device. Depending on the [HDMI Signal Format] setting, an AV device may not be able to output HDR contents in HDR format.
Help Guide Sound Bar HT-A7000 The speaker system cannot connect to a TV with the BLUETOOTH function. When you connect the speaker system and TV with an HDMI cable, the BLUETOOTH connection is canceled.
Help Guide Sound Bar HT-A7000 No TV sound is output from the speaker system. Check the type and connection of an HDMI cable, TV center speaker mode cable, or optical digital cable that is connected to the speaker system and the TV. Disconnect the cables that are connected to the TV and the speaker system, then connect them firmly again. Disconnect the AC power cords (mains leads) of the TV and the speaker system from the AC outlets (mains), then connect them again.
Help Guide Sound Bar HT-A7000 Picture and sound of the device that is connected to the speaker system are not output from the TV when the speaker system is not turned on. Set [Setup] - [Advanced Settings] - [HDMI Settings] - [Control for HDMI] to [On] on the speaker system, and then set [Standby Through] to [Auto] or [On]. Turn on the speaker system, and then switch the input for the device playing.
Help Guide Sound Bar HT-A7000 The sound is output from both the speaker system and TV. Mute the sound of the speaker system or TV. When you connect the speaker system and TV with the TV center speaker mode cable and set [Setup] [Advanced Settings] - [Speaker Settings] - [TV Center Speaker Settings] - [TV Center Speaker Mode] to [On], the center part of the speaker system sound is output from the TV.
Help Guide Sound Bar HT-A7000 The sound is interrupted while watching a TV program or content on a Blu-ray Disc, etc. Check the sound mode setting. If the sound mode is set to [Auto Sound], the sound may be interrupted when the sound mode is changed automatically according to the information of the program that is being played. If you do not want to change the sound mode automatically, set the sound mode to a setting other than [Auto Sound].
Help Guide Sound Bar HT-A7000 The TV sound from this speaker system lags behind the image. Set the adjustment value of the delay between the picture and sound to 0 msec if it is set to the range between 25 msec and 300 msec. A time gap between the sound and picture may occur depending on the sound source. If your TV has a function that delays the image, use it for adjustment. For details, refer to the operating instructions of your TV.
Help Guide Sound Bar HT-A7000 No sound or only a very low-level sound of the device connected to the speaker system is heard. Press (volume) + on the remote control and check the volume level. Press (muting) or (volume) + on the remote control to cancel the muting function. Make sure the input source is selected correctly. You should try other input sources by pressing the input select button on the remote control (TV/HDMI1/HDMI2/ANALOG/USB/BLUETOOTH). Make sure that the connectors are firmly inserted.
Help Guide Sound Bar HT-A7000 The surround effect cannot be obtained. Depending on the input signal and the sound mode setting, surround sound processing may not work effectively. The surround effect may be subtle, depending on the program or disc. To play multi-channel audio, check the digital audio output setting on the device connected to the speaker system. For details, refer to the operating instructions of the connected device.
Help Guide Sound Bar HT-A7000 No sound is output from the optional rear speakers/subwoofer. Install the speaker system, the optional rear speakers and subwoofer at a distance of 1.5 m (5 ft) or more from a wireless LAN router, etc. It may be improved by changing the direction or the antenna’s angle of the wireless LAN router. Wireless LAN router, etc. (a) 1.
Help Guide Sound Bar HT-A7000 Sound is not output from some speakers. Some speakers may not output sound depending on the contents or sound mode.
Help Guide Sound Bar HT-A7000 Sound Field Optimization is failed. When using the optional rear speakers, install them upright so that the labels on the bottom of the speakers are directed downwards. Perform Sound Field Optimization again in a situation where the surrounding is quiet. If the distance between the bar speaker and optional rear speakers/subwoofer is too close or far away from each other, Sound Field Optimization cannot be performed properly.
Help Guide Sound Bar HT-A7000 The USB device is not recognized. Try the following: 1. Turn the speaker system off. 2. Remove and reconnect the USB device. 3. Turn the speaker system on. Make sure that the USB device is securely connected to the (USB) port. Check to see if the USB device is damaged. Make sure that the USB device is turned on. If the USB device is connected via a USB hub or cable, disconnect it and connect the USB device directly to the speaker system.
Help Guide Sound Bar HT-A7000 Pairing cannot be achieved. Bring this speaker system and the BLUETOOTH device closer together. Make sure this speaker system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this speaker system.
Help Guide Sound Bar HT-A7000 BLUETOOTH connection cannot be completed. Make sure that the BLUETOOTH indicator of the bar speaker is lit. Make sure the BLUETOOTH device to be connected with is turned on and the BLUETOOTH function is enabled. Bring this speaker system and the BLUETOOTH device closer together. Pair this speaker system and the BLUETOOTH device again. You may need to cancel the pairing with this speaker system using your BLUETOOTH device first. Pairing information may be deleted.
Help Guide Sound Bar HT-A7000 Sound of the connected BLUETOOTH mobile device is not output from the speaker system. Make sure that the BLUETOOTH indicator of the bar speaker is lit. Bring this speaker system and the BLUETOOTH device closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this speaker system.
Help Guide Sound Bar HT-A7000 Pairing cannot be achieved. Bring this speaker system and the BLUETOOTH headphones closer together. Make sure this speaker system is not receiving interference from a wireless LAN device, other 2.4 GHz wireless devices, or a microwave oven. If a device that generates electromagnetic radiation is nearby, move the device away from this speaker system.
Help Guide Sound Bar HT-A7000 BLUETOOTH connection cannot be completed. Make sure that the BLUETOOTH indicator of the bar speaker is lit. Make sure the BLUETOOTH headphones to be connected with is turned on and the BLUETOOTH function is enabled. Bring this speaker system and the BLUETOOTH headphones closer together. Pair this speaker system and the BLUETOOTH headphones again. You may need to cancel the pairing for the BLUETOOTH headphones with this speaker system first. Pairing information may be deleted.
Help Guide Sound Bar HT-A7000 No sound is output from the connected BLUETOOTH headphones. Make sure that the BLUETOOTH indicator of the bar speaker is lit. Bring this speaker system and the BLUETOOTH headphones closer together. If a device that generates electromagnetic radiation, such as a wireless LAN device, other BLUETOOTH devices, or a microwave oven is nearby, move the device away from this speaker system.
Help Guide Sound Bar HT-A7000 The BLUETOOTH connection with the headphones becomes disconnected. When using Chromecast built-in, the headphones cannot connect to the speaker system via the BLUETOOTH function.
Help Guide Sound Bar HT-A7000 The speaker system cannot connect to the network or the network connection is unstable. Make sure that the wireless LAN router is turned on. Check the network connection and network settings. Depending on the usage environment (including the wall material), radio wave reception conditions, or obstacles between the speaker system and wireless LAN router, the possible communication distance may be shortened. Move the speaker system and wireless LAN router closer to each other.
Help Guide Sound Bar HT-A7000 The wireless LAN router you want is not shown in the wireless network list. Press OPTIONS on the remote control to update the list. If the wireless LAN router you want is still not detected, select [New connection registration] from the network list, then input a network name (SSID) manually.
Help Guide Sound Bar HT-A7000 You cannot connect the speaker system to the Internet. Check the wireless LAN connection. Restart the wireless LAN router.
Help Guide Sound Bar HT-A7000 The remote control of this speaker system does not function. Point the remote control at the remote control sensor on the bar speaker. Remove any obstacles in the path between the remote control and the speaker system. Replace both batteries in the remote control with new ones if they are weak. Make sure you are pressing the correct button on the remote control.
Help Guide Sound Bar HT-A7000 TV remote control does not work. This problem might be solved by enabling the IR repeater function.
Help Guide Sound Bar HT-A7000 The Control for HDMI function does not work properly. Check the connection with the speaker system. Enable the Control for HDMI function on the TV. For details, refer to the operating instructions of your TV. Wait a while, and then try again. If you unplug the speaker system, it will take a while before operations can be made. Wait for 15 seconds or longer, and then try again. Make sure the devices connected to the speaker system support the Control for HDMI function.
Help Guide Sound Bar HT-A7000 [PRTCT] flashes in the front panel display for 5 seconds and the speaker system is turned off. Disconnect the AC power cord (mains lead) and make sure nothing is obstructing the ventilation holes of the speaker system.
Help Guide Sound Bar HT-A7000 [PRTCT], [PUSH], speaker name ([SUB], [RL], or [RR]), and [POWER] flash alternately in the front panel display. Press (power) on the corresponding speaker ([SUB]: optional subwoofer, [RL]: optional left rear speaker, [RR]: optional right rear speaker) to turn each off. For the optional rear speaker, disconnect the AC power cord (mains lead), then restart the speaker system.
Help Guide Sound Bar HT-A7000 [HIGH], [TEMP], and [ERROR] appear alternately for 2 seconds each in the front panel display, [STANDBY] appears in the front panel display, then the speaker system is turned off. High-temperature is detected in the speaker system. Press (power) to restart the speaker system.
Help Guide Sound Bar HT-A7000 [BT TX] appears in the front panel display. Set [Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Receiver]. [BT TX] appears in the front panel display if [Bluetooth Mode] is set to [Transmitter].
Help Guide Sound Bar HT-A7000 Sensors of the TV do not work properly. The bar speaker may block some sensors (such as the brightness sensor), the remote control receiver of your TV or the emitter for 3D glasses (infrared transmission) of a 3D TV that supports the infrared 3D glass system, or wireless communication. Move the bar speaker away from the TV within a range that allow those parts to operate properly.
Help Guide Sound Bar HT-A7000 Wireless functions (wireless LAN, the BLUETOOTH function, or optional subwoofer/rear speakers) are unstable. Do not place metal objects other than a TV around the speaker system.
Help Guide Sound Bar HT-A7000 Music that you are not familiar with suddenly plays. The pre-installed sample music may have been played. Press playback.
Help Guide Sound Bar HT-A7000 The speaker system cannot be turned off or [Advanced Settings] cannot be used./When pressing the power button, [.DEMO] appears in the front panel display and the speaker system cannot be turned off. The speaker system may be in demo mode. To cancel demo mode, reset the speaker system. Press and hold (power) and – (volume) on the bar speaker for more than 5 seconds.
Help Guide Sound Bar HT-A7000 Spotify cannot be played with the MUSIC SERVICE button, or cannot be played on the way of playback. Play music on Spotify on the speaker system by using the Spotify Connect function on the Spotify app of the mobile device.
Help Guide Sound Bar HT-A7000 The speaker system restarts. When connecting to a TV with a resolution that is different from that of the speaker system, the speaker system may restart to reset the picture output setting.
Help Guide Sound Bar HT-A7000 Resetting the Speaker System If the speaker system still does not operate properly, reset the speaker system as follows. 1 Press HOME. The home menu appears on the TV screen. 2 Select 3 Select [Resetting]. 4 Select the menu item you want to reset. 5 Select [Start]. [Setup] - [Advanced Settings] on the home menu. To cancel resetting Select [Cancel] in step 5.
Help Guide Sound Bar HT-A7000 Playable Types of Audio Files Codec * Extension MP3 (MPEG-1 Audio Layer III) .mp3 AAC/HE-AAC .m4a, .aac, .mp4, .3gp WMA9 Standard .wma LPCM .wav FLAC .flac DSF .dsf DSDIFF(*) .dff AIFF .aiff, .aif ALAC .m4a Vorbis .ogg Monkey’s Audio .ape The speaker system does not play DST encoded files. Note Some files may not play depending on the file format, file encoding, recording condition, or other conditions. Some files edited on a PC may not play.
Help Guide Sound Bar HT-A7000 Supported Input Audio Formats Supported audio formats differ depending on the input setting of the speaker system. “ audio format and “–” indicates the unsupported audio format in the table below. Format HDMI 1/2 input TV input (eARC) ” indicates the supported TV input (ARC) TV input (OPT) LPCM 5.1ch – – LPCM 7.
Help Guide Sound Bar HT-A7000 Supported HDMI Video Formats Video formats supported by this speaker system are as follows. 8K 24/25/30/50/60 Hz 4K 24/25/30/50/60/100/120 Hz 1080p 24/25/30/50/60/100/120 Hz 1080i 50/60 Hz 720p 24/30/50/60 Hz 576p 50 Hz 480p 60 Hz About the [HDMI Signal Format] setting When [Setup] - [Advanced Settings] - [HDMI Settings] - [HDMI Signal Format] is set to [Enhanced format (4K120, 8K)], all video formats supported by this speaker system can be input.
This speaker system supports “TRILUMINOS.” All HDMI IN 1, HDMI IN 2, and HDMI OUT (TV (eARC/ARC)) jacks support transmission of 4K 120p or 8K, HDCP2.2 and HDCP2.3(*1), BT.2020 wide color spaces(*2), and HDR (High Dynamic Range)(*3) contents pass-through. When connecting to a TV which resolution is different from that of the speaker system, the speaker system may restart to reset the picture output setting. *1 HDCP2.2 and HDCP2.
Help Guide Sound Bar HT-A7000 On BLUETOOTH Communication BLUETOOTH devices should be used within approximately 10 meters (33 feet) (unobstructed distance) of each other. The effective communication range may become shorter under the following conditions.
Help Guide Sound Bar HT-A7000 Copyrights and Trademarks This speaker system incorporates Dolby(*) Digital and the DTS(**) Digital Surround System. * ** Manufactured under license from Dolby Laboratories. Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Confidential unpublished works. Copyright © 2012–2020 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com.
You may find a copy of the relevant source code as required under the GPLv2 (and other licenses) at https://oss.sony.net/Products/Linux You may obtain the source code as required by the GPLv2 on a physical medium from us for a period of three years after our last shipment of this product by applying through the form at https://oss.sony.net/Products/Linux This offer is valid to anyone in receipt of this information.
SONY: Rear Speaker Operating Instructions SA-RS5 IIIIIII I II II IllII IllII III II IllII I IIII I II111111111111111 * 5 0 3 4 5 0 0 1 1 * (1) 5-034-500-11(1) ©2022 Sony Corporation Printed in China
Owner's Record The model and serial numbers are located on the bottom of the speakers. Record the serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding the speakers. Model No. SA-RSS Serial No. WARNING The AC adaptor is not disconnected from the mains as long as it is connected to the AC outlet, even if the speakers themselves have been turned off.
On cleaning @] Power indicator Clean the rear speaker with a soft, dry cloth. Do not use any type of abrasive pad , scouring powder, or solvent such as alcohol or benzine. Others • At high temperature, the charging may stop or the volume may reduce to protect the battery. • Even if you do not intend to use the rear speaker for a long time, charge the battery to its full capacity once every 6 months to maintain its performance.
7-rJ ~ [] REAR R _HEA_llit Note • Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation. • Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural disaster, etc. 1 Note • Prepare screws (not supplied) that are suitable for the wall material and strength.
1 Press HOME. The home menu appears on the TV screen. 2 Select ;i; [Setup] - [Advanced Settings] on the home menu. 3 Select [Speaker Settings] - [Wireless Speaker Settings] - [RF Channel]. 4 Select the setting you want. • [On] (default setting): Normally select this. The compatible model automatically selects the better channel for transmission. Stronger mode for wireless interference.
Built-in battery charging time About 4 hours (when using with the supplied AC adaptor)* (10 minutes of charging: playable for up to 90 minutes)* * Actual charging time may vary from the time above due to the surrounding temperature and usage conditions. Wireless transmitter/receiver section Communication system Wireless Sound Specification Version 4.0 Frequency band 5 GHz Modulation method OFDM Other information Operating temperature Between 5 °C and 35 °C (41 °F and 95 °F). Dimensions (w/h/d) (approx.
Subwoofer Operating Instructions SA-SW5 5-027-345-12(1) ©2021 Sony Corporation Printed in Malaysia
Owner’s Record Rear The model and serial numbers are located on the rear of the subwoofer. Record the serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. SA-SW5 Serial No. ̖ ̗ About compatible models for the subwoofer The SA-SW5 subwoofer works only with the specified model. For information about compatible models, visit Sony's website.
2 Connect the AC power cord (mains lead) If Wireless Transmission is Unstable (supplied) to the subwoofer, and then connect the cord to the AC outlets (mains). If you use multiple wireless systems, such as a wireless LAN, the wireless signals may become unstable. In this case, the transmission may be improved by changing the following setting. The following operation is described for the subwoofer used with the compatible model HT-A7000 or HT-A9. Use the remote control supplied ECJm:=== ..
Important information on software This product contains software that is subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL''). These establish that customers have the right to acquire, modify, and redistribute the source code of said software in accordance with the terms of the GPL or the LGPL. For the method to confirm the GPL, LGPL and other software licenses contained in the subwoofer, please refer to the Operating Instructions of a compatible model.