User's Manual

19
Contents/Precautions
Take an expended docomo nano UIM
card to a sales outlet such as docomo
Shop for proper disposal in order to
protect the environment.
Do not carelessly damage, contact, or
short-circuit an IC.
Doing so may cause data loss or malfunction.
Do not drop a docomo nano UIM card or
subject it to impact.
Doing so may cause malfunction.
Do not bend a docomo nano UIM card
or place a heavy object on it.
Doing so may cause malfunction.
Do not insert a docomo nano UIM card
into the terminal if a label or seal is
attached to the card.
Doing so may cause malfunction.
Bluetooth
®
function precautions
To secure the Bluetooth communication
security, the terminal supports the
security function compliant with
Bluetooth standards, but the security
may not be sufficient depending on the
setting. Be aware of security risks when
using Bluetooth.
Please be aware that DOCOMO is not
responsible for any data leakage that
might occur when communicating data
via Bluetooth.
Frequency band
The frequency band used by the terminals
Bluetooth/wireless LAN function is written as
follows:
Bluetooth cautions
The operating frequency band of the terminal is
used by industrial, scientific, consumer and
medical equipment including microwave ovens,
premises radio stations for identifying mobile
units used in the manufacturing lines of plants
(radio stations requiring a license), specified low
power radio stations (radio stations requiring no
license) and amateur radio stations (hereinafter
referred to as "another station").
2.4 : This radio equipment uses the 2400 MHz
band.
FH/XX/DS/OF
Modulation scheme is the
FH-SS, other system, DS-SS,
or OFDM system.
4 : The estimated interference distance is 40
m or less.
8 : The estimated interference distance is 80
m or less.
: The full band between 2400 MHz
and 2483.5 MHz is used and the
band of the mobile identification
device can be avoided.
Available channels vary depending on the
country.
For use in an aircraft, contact the airline
beforehand.