User's Guide Part 1

Phonebook
95
Continued
●
For the order of priority between call image, ring tone, and incoming indicator color, see P.111.
●
When you receive a call or mail from a person saved as Secret, the regular ring tone,
incoming image and incoming indicator color are used, and a name of the caller/sender is
not displayed. To enable the settings of a person saved as Secret or a group that includes a
person saved as Secret, set the Secret display to [ON].
●
When 2in1 is used, the phonebook is automatically switched to the available one according
to the 2in1 modes. When you save data in the phonebook, the Phonebook 2in1 setting is
automatically set according to a compatible 2in1 mode. You can also change the Phonebook
2in1 setting by each data or group (P.395).
●
Please note that when you change models and attempt to transfer the saved data to a new
mobile phone at our service counter (DoCoMo shop, etc.), you may not be able to copy it to
the FOMA terminal depending on the specifications of your new phone.
Saving an Entry in the FOMA Terminal Phonebook
<Add to FOMA terminal phonebook>
Up to 1,000 entries can be saved in the FOMA terminal phonebook.
1
Press ( ) in the stand-by display and press (Create).
2
Select [Main memory] and press .
０００
グループなし
Ｐｕｂｌｉｃ
Ｍｏｂｉｌｅ１ 
ＯＦＦ 
Ｄｅｔａｉｌ Ｂａｓｉｃ Ｓｅｔｔｉｎｇ
To save an entry in the UIM phonebook
Select [UIM] (P.98).
3
Save each item at the Basic display.
Icon Settings
Enter a name within 16 full-width or 32 half-width characters.
When entering a name, the reading is automatically entered.
ˎ
To edit the reading, enter the reading within 32 half-width characters.
Enter a memory number from 000 to 999. The smallest available memory number is
automatically entered. Enter a name/phone number/mail address to change it.
Select a group. [
グループなし
] is automatically entered. Enter a name/phone
number/mail address to change it.
Enter within 26 digits per phone number. You can save the pause (P), timer (T), “+”,
“#”, and sub-address separator (
).
ˎ
If a phone number is saved with the “184” or “186”, SMS cannot be sent to this
phone number even if you select it.
Select a phone number type icon. [ Public] is automatically entered. Enter a
phone number to change it.
Enter within 50 half-width alphanumeric characters and symbols per mail address.
ˎ
When sending mail to an i-mode terminal (including a Mova terminal), you need
to specify only the mail address portion before the @ mark.
Select a mail address type icon. [ Mobile1] is automatically entered. Enter a mail
address to change it.