User's Guide Part 1

PushTalk
83
Originating a PushTalk Call from the Call Record
You can originate a PushTalk call using the Redial and Received records.
ˎ
You cannot originate a PushTalk call using the call records of Number B when 2in1 is used.
Example: Originating a PushTalk call from the Received record
1
Press ( ) in the stand-by display.
The Received record display appears.
2
Select a received record and press .
When a PushTalk call is originated, the signal tone sounds.
●
If a member is disconnected during PushTalk communication among several persons, the
disconnected member can come back to the session using the Redial/Received record as
long as the other members continue it. When the PushTalk communication is already ended,
the call is going to be a new one.
Adding a Member during PushTalk Communication
If you originate a PushTalk call, you can add a member during PushTalk
communication.You can add members up to the maximum number allowed for
communication (up to five persons including yourself) and also place a second call to
a non-participating member.
Example: Selecting a member from the PushTalk phonebook
1
Press (Add) during PushTalk communication.
The screen for selecting the method of adding a member appears.
[View PushTalk PB] :
Select a member from the PushTalk phonebook.
[View phonebook] :
Select a member from the FOMA terminal phonebook.
[Direct input] :
Enter a phone number directly.
2
Select [View PushTalk PB] and press .
携帯あき子
携帯なつ子
携帯はる子
ドコモ一郎
ドコモ二郎
Ｍｅｍｂｅｒ
To select a member from a group
Press (Group) and select a group.
3
Select a member and press .
“ ” appears for the selected member.
4
Press (Complete).
The Members to add display appears.
5
Press (Call).
Ｍｙｓｅｌｆ
携帯あき子 Ｃｏｎｎｅｃｔｅｄ
ドコモ一郎 Ｃｏｎｎｅｃｔｅｄ
ドコモ二郎 Ｃｏｎｎｅｃｔｅｄ
携帯はる子 Ｃａｌｌｉｎｇ
Ｏｎ ＰｕｓｈＴａｌｋ
The FOMA terminal starts calling the selected member.
Continued