Sonos Sonos User Guide T
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including but not limited to photocopying, recording, information retrieval systems, or computer network without the written permission of Sonos, Inc. Sonos and all other Sonos product names and slogans are trademarks or registered trademarks of Sonos, Inc. Sonos Reg. U.S. Pat. & Tm. Off.
The Sonos Home Sound System Sonos is the wireless home sound system that fills as many rooms as you want (up to 32) with music, movies and TV. Listen in any room or every room—play a movie in the living room, a podcast in the kitchen, or the same song everywhere. Explore our products to find out more. • Free Sonos app guides you through setup and provides music control for everyone in the house on all their devices—phones, tablets, and computers.
SONOS USER GUIDE Getting started Here’s what you’ll need: • WiFi—have your network name and password ready. • Mobile device—connected to the same WiFi. You’ll use this for setup. • Sonos S2 app—you’ll use it to set up and control your Sonos system—choose what to play, where to play it, and how loud. Install the app on the mobile device you’re using for setup. (If you’re upgrading from the Sonos S1 app, you can remove S1 from your device after you upgrade.
SONOS USER GUIDE Sonos accounts During setup you’ll create a Sonos account that you’ll use to manage and expand your Sonos system—both in the app and on www.sonos.com. If you need to verify your user ID, change a password, or transfer your account to a different email address, open the app on your mobile device and tap > Account. If Account isn't available, your system needs to be updated. Learn more about Sonos accounts. Parental controls You can restrict access to explicit music.
SONOS USER GUIDE Explore our products Sonos products work together seamlessly. It’s easy to add speakers and expand your system as your home changes. Speakers for your music The perfect wireless speaker for any room in your home. You can even stereo pair two speakers (same model) in a room—turn each one into separate left and right channels for wider, bigger, and deeper sound. • • • • Roam and Move: durable smart speaker for indoor and outdoor listening. One: smart speaker with built-in voice control.
SONOS USER GUIDE Sonos S2 app Download the app on your mobile device. You’ll use it to set up and control your Sonos system. If you’re upgrading from the Sonos S1 app, you can remove S1 from your device after you upgrade. Note: Products released after May 2020 are only compatible with S2.
SONOS USER GUIDE Mobile app controls Note: You can skip through content by tapping or (available only with certain services). Tap an icon to find and play music. My Sonos A space to save and play your favorite music and collections so you always know where to find the music you love. Browse Browse through music services, your music library, and music on your mobile device. When you find music you like, start playing it in any room. System See what’s playing in your rooms.
SONOS USER GUIDE Search Search your music sources. Settings Add music and voice services, set alarms, go to Sonos Tips and System Settings. Queue controls When you play a song, it’s automatically added to your music queue. You can control how the music plays in the queue. • Shuffle—change the song order. • Repeat—repeat all songs, or tap again to repeat the song that’s playing. • Crossfade - fades out the current song while fading in the next song to create a smooth transition between songs.
SONOS USER GUIDE Mac/PC controls Play / Pause Toggles between playing and pausing. Sonos speakers are designed to be always on; they use minimal power when there’s no audio playing. Next / Fast Forward Jumps to the next song. Click and hold to fast forward through the current song. Previous / Rewind Jumps to the beginning of the current song; click twice to play the previous song. Click and hold to rewind the current song.
SONOS USER GUIDE Repeat Repeats songs in the queue. The indicator brightens when the control is activated. Shuffle Changes the order of the songs in the queue. Turn it off to return the songs to their original playback order. If you turn it on again you get a different mix. The indicator brightens when the control is activated. Crossfade Fades out the current song while fading in the next song to create a smooth transition between songs. The indicator brightens when the control is activated.
SONOS USER GUIDE Sonos S1 Controller app This original Sonos app can be downloaded on your mobile device to control your older products. Products released after May 2020 aren’t compatible with the S1 Controller app. If you have both older and newer products, you can unplug your older products, or upgrade them; or you can create two separate systems— one running S2 with products that are S2 compatible and another running S1 with products that are not. Learn more.
SONOS USER GUIDE Tap an icon to find and play music. My Sonos A space to save and play your favorite music and collections so you always know where to find the music you love. Browse Browse through music services, your music library, and music on your mobile device. When you find music you like, start playing it in any room. Rooms See what’s playing in your rooms. Group rooms to play the same music in different rooms or everywhere. Search Search your music sources.
SONOS USER GUIDE Mac/PC controls Play / Pause Toggles between playing and pausing. Sonos speakers are designed to be always on; they use minimal power when there’s no audio playing. Next / Fast Forward Jumps to the next song. Click and hold to fast forward through the current song. Previous / Rewind Jumps to the beginning of the current song; click twice to play the previous song. Click and hold to rewind the current song.
SONOS USER GUIDE Repeat Repeats songs in the queue. The indicator brightens when the control is activated. Shuffle Changes the order of the songs in the queue. Turn it off to return the songs to their original playback order. If you turn it on again you get a different mix. The indicator brightens when the control is activated. Crossfade Fades out the current song while fading in the next song to create a smooth transition between songs. The indicator brightens when the control is activated.
SONOS USER GUIDE Roam Sonos Roam is the portable smart speaker for listening at home and on the go. • Enjoy up to 10 hours of continuous playback on a single charge—when it’s time to recharge, connect the included cable to a 7.5 W or higher USB power source, place Roam on a compatible Qi wireless charger, or magnetically snap Roam to its custom wireless charger (sold separately). • Lightweight, durable, waterproof design is ideal for the beach, pool parties, and more.
SONOS USER GUIDE Controls and lights Volume control Volume up (+); Volume down (-) Note: Press and hold to quickly change the volume. Playback control and sound swap • Press once to play or pause audio. • Press and hold to group with other speakers. Continue holding the button down to move the sound to and from your nearest Sonos speaker. • Double press for next track. • Triple press for previous track. Note: You can’t skip forward or go back when listening to a radio station.
SONOS USER GUIDE Back panel USB-C port Power button Use the included cable to connect to a compatible 7.5 W or higher USB-A power source. Power / Bluetooth Press to power on. Press and hold to power off. Note: When Roam is on, a single press activates sleep mode to save battery life. To wake Roam up, press any button. To pair a Bluetooth device, press and hold until you hear the pairing tone. Charging USB-C to USB-A Use the included cable to connect to a compatible 7.5 W (5V/1.
SONOS USER GUIDE Waterproof design Roam has an IP67 rating—it’s dustproof and waterproof and can be submerged 1 meter for up to 30 minutes. If Roam gets saturated with water, you can dry it off this way: 1. Flush Roam with tap water, then give it a quick shake. 2. Place the speaker vertically for a few seconds until it drains, then place it face down (logo side down) on a dry towel for a few minutes. 3. Start playing some audio to assist with drainage.
SONOS USER GUIDE Specifications Sonos Roam Feature Description Audio Amplifier Two Class-H digital amplifiers. Tweeter One tweeter offers crisp high frequencies. Mid-Woofer One mid-woofer ensures faithful playback of mid-range vocal frequencies. Adjustable EQ Use the Sonos S2 app to adjust bass, treble, and loudness. Microphone array Far-field microphone array uses advanced beamforming and multi-channel echo cancellation so your voice assistant can be readily activated.
SONOS USER GUIDE Feature Description Power & Connectivity WiFi Connects to WiFi network with any 802.11a/b/g/n/ac 2.4 or 5 GHz broadcast-capable router Bluetooth Bluetooth 5.0 supports audio streaming from your smartphone and other devices Inputs USB-C for charging Battery 18 Wh battery provides up to 10 hours of continuous playback on a single charge Recharging Recharge with the included USB-C cable connected to any 7.5 W (5V/1.
SONOS USER GUIDE Important safety information Please read these instructions and heed all warnings. Keep them in a convenient location and make sure everyone in the household is aware of them. Important:Do not connect the USB cable to Roam while using the NFC tag. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Clean with a damp or dry soft cloth. Do not use household cleaners or solvents as they may damage the finish on your Sonos products. 6.
SONOS USER GUIDE Move Move is the durable, battery-powered smart speaker for indoor and outdoor listening. • Rechargeable battery lasts up to 10 hours. Easily recharge by just setting Move on the charging base— no plugs or extra wires required. For power on the go, use a compatible USB-C charger. • Weatherproof design is ideal for barbecues, pool parties, and more. • Stream over WiFi at home—switch to Bluetooth anywhere else. • Easy voice control with Amazon Alexa and the Google Assistant built right in.
SONOS USER GUIDE Controls and lights Volume control • Touch and hold to quickly change the volume: • Volume up (right); Volume down (left). Play/Pause • Press once to play or pause music. • Press and hold to add the music that’s playing in another room. Next/Previous • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station.
SONOS USER GUIDE Back panel Join button Press to connect to your Sonos system during setup. USB-C port Use a compatible USB-C charger for charging on the go. • USB port may also be used for diagnostic purposes. (It can’t stream large data files, like some music files). Note: USB-C cable not included. Power button Press to power on; press and hold to power off. If Move is off the charging base, it goes to sleep to save battery when you’re not using it. Just press the power button to wake it up.
SONOS USER GUIDE • It’s ultra durable. With a tough outer shell and IP56 rating, Sonos Move is built to withstand falls, bumps, moisture, dust, UV rays, and extreme temperatures. Just don’t leave it out in a soaking rain storm, and remember that the charging base that’s included is for indoor use only. • Don’t use or store your Sonos Move upside down. Automatic Trueplay™ You can put Sonos Move just about anywhere.
SONOS USER GUIDE Accessories For add-ons tailored to perfectly fit your Move, see Accessories on our website. Specifications Sonos Move Feature Description Audio Amplifier Two Class-D digital amplifiers. Tweeter One tweeter creates a crisp and accurate high frequency response. Mid-Woofer One mid-woofer ensures the faithful playback of mid-range vocal frequencies plus deep, rich bass. Microphones Voice Control • Far-field microphone array.
SONOS USER GUIDE Feature Description Product Finish Black with black grille Package Contents Sonos Move, charging base, and Quickstart guide. * Specifications subject to change without notice. Charging base Charging base • Just set Move on the charging base for easy recharging. • Charging base is for indoor use only—be sure to keep it dry. • Move’s remaining battery life is always visible in the Sonos app. AC power 100-240 VAC, ~50/60 Hz, 1.2A. Output: 18.0 VDC, 2.5 A, 45.
SONOS USER GUIDE 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. 8. Do not expose batteries (battery pack or batteries installed) to excessive heat such as sunshine or fire. 9. Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 10. Only use attachments/accessories specified by the manufacturer. 11.
SONOS USER GUIDE One Sonos One has Amazon Alexa built right in so you can use your voice to start and control the music on Sonos— • Perfect fit for shelves, counters, and snug spaces or mounted to a wall, ceiling or speaker stand. • Touch controls let you adjust volume, play and pause, or skip through songs. • Pair two Sonos Ones for left-right stereo sound, or use two Sonos Ones as rear surrounds for your home theater. • Works with either Sonos S2 or Sonos S1 .
SONOS USER GUIDE Controls and lights Volume control • Touch and hold to quickly change the volume: • Volume up (right); Volume down (left). Play/Pause • Press once to play or pause music. • Press and hold to add the music that’s playing in another room. Next/Previous • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station.
SONOS USER GUIDE Select a location You can put your speaker just about anywhere. Here’s a few guidelines: • Sonos One sounds great even when placed next to a wall or on a shelf. For best performance, leave at least 1" (2.5 cm) space around the back of the speaker. • It’s humidity-resistant so you can use it in the bathroom. • It’s not water-resistant so don’t put it near water or leave it in the rain.
SONOS USER GUIDE Feature Description Networking* Wireless Connectivity Using Sonos S2: Connects to WiFi network with any 802.11a/b/g/n 2.4 or 5 GHz broadcast-capable router. Using Sonos S1: Connects to WiFi network with any 802.11b/g 2.4 GHz broadcast-capable router. 802.11n only network configurations are not supported—you can either change the router settings to 802.11b/g/n or connect a Sonos product to your router. Ethernet Port One 10/100Mbps Ethernet port.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE One SL The speaker for stereo pairing and home theater surrounds. • Compact design fits just about any space. • Touch controls let you adjust volume, play and pause, or skip through songs. • Pair with a Sonos One or another One SL for left-right stereo sound, or use a pair as rear surrounds for your home theater. • Works with either Sonos S2 or Sonos S1 . • See Getting started when you’re ready to add a Sonos One SL to your system.
SONOS USER GUIDE Controls and lights Volume control • Touch and hold to quickly change the volume: • Volume up (right); Volume down (left). Play/Pause • Press once to play or pause music. • Press and hold to add the music that’s playing in another room. Next/Previous • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status.
SONOS USER GUIDE Specifications Feature Description Audio Amplifier Two Class-D digital amplifiers. Tweeter One tweeter creates a crisp and accurate high frequency response. Mid-Woofer One mid-woofer ensures the faithful playback of mid-range vocal frequencies plus deep, rich bass. Stereo Pair Turn two speakers into separate left and right channel speakers to create wider, deeper sound. Home Theater Add two speakers as surrounds for a true surround sound experience.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE Five The high-fidelity speaker for superior sound— • Three woofers provide deep bass within a sealed architecture that eliminates reverb and echo. Two side tweeters create an ultra wide soundstage while a center tweeter optimizes vocal playback. • Use the line-in port to connect your turntable or another device—simple control with the Sonos S2 app or Apple AirPlay 2. • Versatile design with smart orientation sensing.
SONOS USER GUIDE Controls and lights Volume control Touch and hold to quickly change the volume: • Volume up (right) • Volume down (left) Play/Pause • Press once to play or pause music. • Press and hold to add the music that’s playing in another room. Next/Previous song • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status.
SONOS USER GUIDE Connector panel Join button Ethernet port AC power (mains) input Stereo audio in Join button Press to connect during setup. Ethernet port Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional). AC power (mains) input Use only the supplied power cord (using a third-party power cord will void your warranty). Note: Insert the power cord firmly until it is flush with the bottom of the speaker. Stereo audio in (3.
SONOS USER GUIDE • Place Five across the room from where you’ll be listening (at or close to your ear height for best results). • For stereo pair placement information, see Stereo pairs. • The Five is humidity resistant so you can use it in the bathroom; however it is not water resistant so don’t position it near water or leave it outside during a rain storm. Speaker mounts and stands For wall mount kits or stands, tailored to perfectly fit your Sonos products, see Accessories on our website.
SONOS USER GUIDE Feature Description General Power Supply Auto-switching 100 - 240 V ~ 50-60 Hz 2.3 A AC universal input. Audio Line-In Auto-detecting 3.5 mm audio line-in connection. Dimensions (W x H x D) 14.33 x 8.03 x 6.06 in. (364 x 203 x 154 mm) Weight 14 lb / 6.36 kg Threaded Mount None Operating Temperature 32º to 104º F (0º to 40º C) Storage Temperature -4º to 158º F (-20º to 70º C) Humidity Resistant Designed to withstand high-humidity, like in a bathroom with a running shower.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE Arc The premium smart soundbar for TV, movies, music, and more— • 3D sound with Dolby Atmos. • Eleven high-performance drivers, including custom elliptical woofers and angled side tweeters for rich bass and clear dialogue. • Arc’s advanced processing creates five phased-array channels that deliver sound to your ears from all directions. • Quick and easy setup, with only one cable to connect to your TV. Elegant design discreetly mounts to the wall or sits on a credenza beneath the TV.
SONOS USER GUIDE Play/Pause Volume down Volume control Volume up Touch for small adjustments or touch and hold to quickly change the volume: • Volume up (right) • Volume down (left) Note: You can also use the app, a voice assistant, or your TV remote control. Play/Pause Next/Previous (Music only) Touch to play or pause sound. • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song.
SONOS USER GUIDE Microphone indicator • Tap the microphone light to turn the microphone on or off. • When the light is on, voice control is on and you can use voice commands. • When the light is off, voice control is off. Note: If the light is off, you can press and hold the Microphone indicator to talk to Alexa. Release the button to turn voice control off again. Status light Indicates the status.
SONOS USER GUIDE Ethernet port Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional). HDMI port Use to connect Sonos Arc to your TV. Select a location You can wall mount Sonos Arc under your TV or place it on a credenza. Place on a credenza • Place horizontally on a stable and level surface. • Keep 4.0" (102 mm) space (minimum) between the top of Sonos Arc and the bottom of your TV (if placing Arc below the TV).
SONOS USER GUIDE Connect the power cord 1. Insert the power cord firmly into Arc’s power port until it’s fully connected. Power port 2. Plug the other end into a power outlet. Caution: Use only the supplied power cord (using a third-party power cord will void your warranty).
SONOS USER GUIDE Connect Sonos Arc to your TV Use the HDMI cable to connect the soundbar to your TV. If your TV doesn’t have an ARC or eARC port, you’ll need to use the optical adapter too (the app guides you through it during setup). 1. Fully insert the HDMI cable into Arc’s HDMI port. HDMI ARC or eARC port HDMI cable 2. Connect the HDMI cable to your TV: • If your TV has an HDMI ARC or eARC port, plug the HDMI cable directly into the TV port labeled ARC, eARC, or ARC/eARC.
SONOS USER GUIDE Digital audio out If your TV doesn’t have an HDMI ARC or eARC port, you’ll use the optical audio adapter (included) to connect to your TV’s digital audio out port. 1. Remove the protective cap from the adapter. 2. Attach the optical adapter to the HDMI cable. Remove the protective cap Optical adapter HDMI cable 3. Connect the optical adapter to the TV’s optical digital OUT port. Note: The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port.
SONOS USER GUIDE Wall mount Guidelines • • • • Use the Sonos Arc wall mount kit. You can buy it on www.sonos.com. Follow the instructions in the kit. Keep 4.0" (102 mm) space (minimum) between Sonos Arc and your TV. Make sure the touch controls are facing up. For best sound quality, keep both ends of Arc at least 1' (30cm) from a wall or other obstruction.
SONOS USER GUIDE 2. Mark the screw locations and remove the guide. Refer to Wall mounting information for placement help. 3. If you’re using the included wall anchors, use a 5/16" drill bit to drill the pilot holes and then insert the wall anchors. Don’t use the anchors if you’re drilling into wood or plastic.
SONOS USER GUIDE 4. Position the wall mount bracket over the marked screw locations, using a level to confirm accuracy. Use a Phillips-head screwdriver or a power drill to screw the bracket to the wall, making sure the arrows in the center are pointing up. 5. Screw the 2 knobs into the back of the soundbar until they are fully tightened.
SONOS USER GUIDE 6. Connect the power and HDMI cables to the back of the soundbar. Note: If you’re connecting the cables to the TV at this time, be sure to plug the HDMI cable into the HDMI ARC or eARC port on your TV. 7. Slide the soundbar down so the knobs fit into the slots on the wall bracket. Make sure the touch controls are facing up, and the soundbar is fully seated.
SONOS USER GUIDE Wall mounting information Wall Material Pre Drill Use Wall Anchors Use Screws Wood Stud 1/8" / 3 mm bit No 2 Drywall (no stud) 5/16" / 8 mm bit Yes 6 Plaster 5/16" / 8 mm bit No, requires toggle bolt (not included) 2-6 Concrete or Brick 5/16" / 8 mm bit Yes 2-6 Specifications Feature Description Audio Amplifier Eleven Class-D digital amplifiers.
SONOS USER GUIDE Feature Description Storage Temperature -4° F to 122° F (-20° C to 50° C) Control Use your remote control, voice, touch controls, or the Sonos S2 app. Supported Devices Connects to TV with HDMI cable (with or without an attached optical adapter). Plays sources connected to the TV, including cable boxes and game consoles. Package Contents Sonos Arc, AC power cord, HDMI cable, optical audio adapter, Quickstart Guide. * Specifications subject to change without notice.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. If your product is wallmounted: • Improper or inadequate wallmount installation could cause your device to fall, resulting in personal injury. • Never hang from the Sonos product or the wall bracket. • Once wall-mounted, periodically check to ensure screws remain securely tightened. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth.
SONOS USER GUIDE Arc SL The premium smart soundbar for TV, movies, music, and more— • 3D sound with Dolby Atmos. • Eleven high-performance drivers, including custom elliptical woofers and angled side tweeters for rich bass and clear dialogue. • Arc SL’s advanced processing creates five phased-array channels that deliver sound to your ears from all directions. • Quick and easy setup, with only one cable to connect to your TV. Elegant design discreetly mounts to the wall or sits on a credenza beneath the TV.
SONOS USER GUIDE Play/Pause Volume down Volume control Volume up Touch for small adjustments or touch and hold to quickly change the volume: • Volume up (right) • Volume down (left) Note: You can also use the app, a voice assistant, or your TV remote control. Play/Pause Next/Previous (Music only) Touch to play or pause sound. • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song.
SONOS USER GUIDE Connector panel Join button Ethernet port HDMI port AC power (mains) input AC power (mains) input Use only the supplied power cord (using a third-party power cord will void your warranty). Note: Insert the power cord firmly until it is flush with the speaker. Join button Press to connect during setup. Ethernet port Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).
SONOS USER GUIDE Select a location You can wall mount Sonos Arc SL under your TV or place it on a credenza. Place on a credenza • Place horizontally on a stable and level surface. • Keep 4.0" (102 mm) space (minimum) between the top of Sonos Arc SL and the bottom of your TV (if placing Arc SL below the TV). • Don’t place vertically or on its side. • Make sure the touch controls are facing up. Wall mount To put Sonos Arc SL on a wall, see Wall mount. Connect the cables Before you start 1.
SONOS USER GUIDE 2. Plug the other end into a power outlet. Caution: Use only the supplied power cord (using a third-party power cord will void your warranty). Connect Sonos Arc SL to your TV Use the HDMI cable to connect the soundbar to your TV. If your TV doesn’t have an Arc or eArc port, you’ll need to use the optical adapter too (the app guides you through it during setup). 1. Fully insert the HDMI cable into Arc SL’s HDMI port. HDMI ARC or eARC port HDMI cable 2.
SONOS USER GUIDE Digital audio out If your TV doesn’t have an HDMI Arc or eArc port, you’ll use the optical audio adapter (included) to connect to your TV’s digital audio out port. 1. Remove the protective cap from the adapter. 2. Attach the optical adapter to the HDMI cable. Remove the protective cap Optical adapter HDMI cable 3. Connect the optical adapter to the TV’s optical digital OUT port. Note: The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port.
SONOS USER GUIDE • 2 knobs • 6 wall anchors • 6 screws Note: Don’t discard the positioning guide. It may look like packing material. 1. If your TV is wall-mounted, place the positioning guide against the wall, aligning the top edge with the bottom of your TV. There should be 5.5" (140 mm) between the top of the wall mount bracket and the TV.
SONOS USER GUIDE 2. Mark the screw locations and remove the guide. Refer to Wall mounting information for placement help. 3. If you’re using the included wall anchors, use a 5/16" drill bit to drill the pilot holes and then insert the wall anchors. Don’t use the anchors if you’re drilling into wood or plastic. 4. Position the wall mount bracket over the marked screw locations, using a level to confirm accuracy.
SONOS USER GUIDE 5. Screw the 2 knobs into the back of the soundbar until they are fully tightened. 6. Connect the power and HDMI cables to the back of the soundbar. Note: If you’re connecting the cables to the TV at this time, be sure to plug the HDMI cable into the HDMI Arc or eArc port on your TV.
SONOS USER GUIDE 7. Slide the soundbar down so the knobs fit into the slots on the wall bracket. Make sure the touch controls are facing up, and the soundbar is fully seated.
SONOS USER GUIDE Feature System Requirements Description TV with HDMI Arc SL or optical digital audio output, broadband internet, and the Sonos S2 app. Networking* Wireless Connectivity See Setup options. Ethernet Port One 10/100 Mbps Ethernet port. You can wire directly to your router if your WiFi is unstable. General Power Supply Auto-switching 100-240 V, 50-60 Hz 3.5 A AC universal input. Dimensions (H x W x D) 3.4 x 45 x 4.5 in. (87 x 1141.7 x 115.7 mm) Weight 13.78 lb (6.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. If your product is wallmounted: • Improper or inadequate wallmount installation could cause your device to fall, resulting in personal injury. • Never hang from the Sonos product or the wall bracket. • Once wall-mounted, periodically check to ensure screws remain securely tightened. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth.
SONOS USER GUIDE Beam The smart, compact soundbar for your TV— • • • • • • Play anything—music, TV, movies, podcasts, radio, audiobooks, and video games. Perfect size to wall-mount above or below your TV, or place on a credenza. Great for small to medium-sized rooms. Microphone on/off so you can use it hands-free. Quick and easy setup, with only one cable to connect to your TV. Expandable. Add a Sub and two Sonos speakers, like Play:1s, for 5.1 surround sound. For more information, see Sonos home theater.
SONOS USER GUIDE Volume control Touch for small adjustments or touch and hold to quickly change the volume: • Volume up (right) • Volume down (left) Note: You can also use the app, Alexa, or remote control. Play/Pause Next/Previous (Music only) Touch to play or pause sound. • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station.
SONOS USER GUIDE Connector panel AC power (mains) input Join button AC power (mains) input HDMI port Ethernet port Use only the supplied power cord (using a third-party power cord will void your warranty). Note: Insert the power cord firmly until it is flush with the speaker. Join button Press to connect during setup. Ethernet port Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).
SONOS USER GUIDE Select a location You can mount Beam to a wall above or below your TV or place it on a credenza. Place on a credenza • • • • • • Place horizontally on a stable and level surface at least 2" (50mm) from the TV. Don’t place vertically or on its side. Don’t block the TV’s IR sensor. If put on a shelf, place at the front and keep 2" (minimum) clearance on both sides for best sound quality. Keep 1" (25mm) space (minimum) above Beam so you can reach the touch controls.
SONOS USER GUIDE 2. Connect the HDMI cable to your TV. You have two choices: • If your TV has an HDMI ARC port, connect the HDMI cable directly to the TV’s HDMI ARC port. • If your TV doesn’t have an HDMI ARC port, attach the optical adapter to the HDMI cable and connect it to the TV’s optical digital OUT port. If your TV has an HDMI ARC port HDMI ARC is a special port that looks like a standard HDMI port. Although they look the same, if you connect to a standard HDMI port, you won’t hear sound. 1.
SONOS USER GUIDE If your TV doesn’t have an HDMI ARC port You’ll need the optical audio adapter. 1. Remove the protective cap from the optical adapter. 2. Attach the optical adapter to the HDMI cable.
SONOS USER GUIDE 3. Connect the optical adapter to the TV’s optical digital OUT port. TV’s optical digital OUT port Optical adapter attached to HDMI cable Beam’s HDMI port Note: The optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port. Inserting the adapter incorrectly may damage the cable. If you don’t have the app, download it from the app store. You’ll use it to set up and control your Sonos system. See Getting started.
SONOS USER GUIDE Mount kit contents • • • • Wall mount bracket 4 wall anchors 4 wall screws 2 screws Note: Don’t discard the template. It may look like packing material. 1. Tape the cardboard template to the wall above or below your TV. Use a level. Keep 1" (25mm) space (minimum) for access to Beam’s touch controls. (Don’t install Beam vertically.) 2. Mark the center of the mounting holes and remove the template.
SONOS USER GUIDE 3. Use a 5/16" drill bit to drill pilot holes (see Wall mounting information) 4. Insert and secure the wall anchors (don’t use the anchors if drilling into wood).
SONOS USER GUIDE 5. Place the bracket on the wall and loosely tighten the wall screws to secure the bracket. Check with a level and then tighten the screws.
SONOS USER GUIDE 6. Connect the power and HDMI cables to Beam. 7. Place Beam on the bracket.
SONOS USER GUIDE 8. Insert and tighten Beam to the bracket using the mounting screws. Wall mounting information Wall Material Pre Drill Use Wall Anchors Use Screws Wood Stud 1/8" / 3 mm bit No Yes Drywall (no stud) 5/16" / 8 mm bit Yes Yes Hard wallboard or double board 5/16" / 8 mm bit Yes Yes Plaster 5/16" / 8 mm bit No, requires toggle bolt Yes Concrete or Brick 5/16" / 8 mm bit Yes Yes Specifications Feature Description Audio Amplifier Five Class-D digital amplifiers.
SONOS USER GUIDE Feature Microphones Description • Five far-field microphone array uses for advanced beam forming and multichannel echo cancellation. • LED hard-wired to voice microphones for privacy control so you know when the microphone is active. Voice Control Integrated voice control. System Requirements TV with HDMI ARC or optical digital audio output, broadband internet, and the Sonos app. Networking* Wireless Connectivity Connects to your home WiFi network with any 802.11 b/g/n router. 802.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.If your product is wallmounted: • Improper or inadequate wallmount installation could cause your device to fall, resulting in personal injury. • Never hang from the Sonos product or the wall bracket. • Once wall-mounted, periodically check to ensure screws remain securely tightened. 6.Do not use this apparatus near water. 7.Clean only with dry soft cloth.
SONOS USER GUIDE Amp Amp features a built-in state-of-the-art digital amplifier that can power large or small speakers so you can enjoy superior audio in any room. • • • • Power your bookshelf, floor-standing, in-wall, and in-ceiling speakers. Connect to your TV to create the ultimate entertainment system. Stream everything you love with the Sonos app and AirPlay. Plug in any audio device, like a turntable or a phone, and listen out loud. • Works with either Sonos S2 or Sonos S1 .
SONOS USER GUIDE Status light Indicates the status. Learn more If the light is distracting, you can turn it off in your room’s settings. Volume control Touch for small adjustments or touch and hold to quickly change the volume: • Volume up (right) • Volume down (left) Note: You can also use our app or your remote control. Play/Pause Next/Previous (Music only) Touch to play or pause sound. • TV—When the TV is on, touch to toggle the sound on and off.
SONOS USER GUIDE HDMI ARC Use an HDMI cable to connect Amp to your TV’s HDMI ARC port. Join button Press to connect during setup. AC power (mains) port Use only the supplied power cord (using a third-party power cord will void your warranty). Note: Insert the power cord firmly. Analog audio in Use a standard RCA audio cable to connect Amp’s analog audio inputs to the audio outputs from a separate audio component, such as a turntable or a portable music player.
SONOS USER GUIDE Placed on a credenza • • • • Place horizontally on a stable and level surface at least 3 in / 50 mm from the TV. Don’t block the TV’s IR sensor. If put on a shelf, place at the front and keep 3" (minimum) clearance on all sides. Don’t block the front of Amp so you can reach the touch controls. Connect the cables Attach desired speakers Your speakers’ power rating should be at least 125W for 8 ohm speakers, and at least 200W for 4 ohm speakers.
SONOS USER GUIDE If your TV has an HDMI ARC port HDMI ARC is a special port that looks like a standard HDMI port. Although they look the same, if you connect to a standard HDMI port, you won’t hear sound. 1. On your TV’s audio OUT panel, locate the HDMI ARC port. It may be on the back or side of your TV. Look for the port with “ARC” on the label. 2. Connect the HDMI cable to the TV’s HDMI ARC port. Note: If you can’t find a port with the word “ARC” on the label, your TV doesn’t have an HDMI ARC port.
SONOS USER GUIDE Line-in Connect an external source like a phono preamp (your turntable may have a built-in phone preamp), or other audio device. Learn more. Change from stereo to mono Amp plays audio in stereo by default. You can change the sound settings for the room associated with the Amp so that it plays in two mono channels when playing music.
SONOS USER GUIDE * Specifications subject to change without notice. Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE Port The versatile streaming component for your stereo or receiver. • • • • Plug in the audio equipment you already own and listen out loud. Stream everything you love using the Sonos app and AirPlay2. Use line-in to connect your turntable, or play music straight from a friend’s phone on your stereo. 12 V trigger automatically turns your amplifier on and off. • Works with either Sonos S2 or Sonos S1 . • See Getting started when you’re ready to add Port to your Sonos system.
SONOS USER GUIDE 12 V trigger Use a stereo or 3.5 mm to 3.5 mm cable to wake your third-party amplifier whenever Sonos starts playing audio. Note: Read the guide that came with your amplifier for details on the use of 12V trigger input. AC power (mains) input Use only the included power supply (using a third-party power supply will void your warranty).
SONOS USER GUIDE digital output to the digital input on the receiver. • If you have analog inputs on your AVR or amplifier, use a standard RCA audio cable to connect Port’s analog audio output to the audio inputs on the receiver. • Select the proper input channel on the receiver. See Control volume from your AVR or amplifier to adjust volume settings. If you don’t have the app, download it from the app store on your mobile device. You’ll use it to set up and control your Sonos system.
SONOS USER GUIDE Specifications Feature Description Audio Sound Quality THD+N<0.009%, 20 Hz-20 kHz Line In Analog (RCA), auto-detecting Line Out Analog (RCA), digital (coaxial) Networking* Wireless Connectivity Using Sonos S2: Connects to WiFi network with any 802.11a/b/g/n 2.4 or 5 GHz broadcast-capable router. Using Sonos S1: Connects to WiFi network with any 802.11b/g 2.4 GHz broadcast-capable router. 802.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE Sub Sonos Sub takes your audio experience to the next level— • Instantly adds a dimension of deep bass impact to your audio listening experience. • Pair Sub (Gen 3) with any other Sub and feel the bass from every corner of the room. • Allows placement anywhere because it’s wireless and compact—position it vertically or horizontally on any floor surface. • The top of the acoustic slot doubles as a handle so you can lift it. • Sub (Gen 3) is compatible with Sonos S2 only.
SONOS USER GUIDE Controls and lights Join button Press to connect during setup. Status light Indicates the status. Learn more If the light is distracting, you can turn it off in your room’s settings. Connector panel Ethernet port Use an Ethernet cable to connect Sub to your home network. AC power (mains) input Use only the supplied power cord to connect to a power outlet (using a third party power cord will void your warranty). Be sure to use the proper power adapter for your country.
SONOS USER GUIDE Make sure at least one side of the rectangular opening (acoustic slot) is unobstructed. • If you place Sub vertically flush against a wall, don’t block the front acoustic slot. • If you place Sub horizontally on the floor, don’t put anything on top of it. Leave at least 1" clearance along the top of Sub if placing under furniture. Note: Sub contains strong magnets. Don’t place it near equipment that is sensitive to magnetic fields.
SONOS USER GUIDE 2. Place the enclosed guide on one corner of the unit and fold the flaps over the edge. Felt foot Guide for felt foot placement 3. Peel the backing off one of the feet. 4. Press the felt foot (sticky side down) onto the unit inside the circular portion of the guide. 5. Attach the other 3 felt feet the same way. Connect the cables Attach the power cord and plug in Sub. Be sure to push the power cord firmly into Sub until it is flush with the surface.
SONOS USER GUIDE • Phase Control: Choose 0° or 180° to set the phase control for your Sonos Sub or third-party subwoofer. This can help integrate your subwoofer with other speakers in the room. (You’ll see this setting when you pair a Sonos Sub or third-party subwoofer with a Sonos Amp or Connect:Amp.) • Crossover Frequency: Adjust the frequency at which the sound transitions to the subwoofer. By default this is 80 Hz.
SONOS USER GUIDE Specifications Feature Description Audio Amplifier Two Class-D digital amplifiers. Speakers Two force-canceling speakers positioned face-to-face for deeper, richer sound and zero cabinet buzz or rattle. Dual Acoustic Ports Tuned to enhance Sub performance. Frequency Response Plays down to 25 Hz.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE Boost For when existing WiFi isn’t reliable enough for streaming music— • Boost broadcasts 360° signals through walls and ceilings for flawless coverage. • Streams without interference in the most challenging WiFi environments. • Bypasses your WiFi to create a separate high-performance wireless network just for Sonos speakers. • Works with either Sonos S2 or Sonos S1 .
SONOS USER GUIDE Controls and lights Join button Press to connect during setup. Status light Indicates the status. Learn more If the light is distracting, you can turn it off in your room’s settings. Connector panel AC power (mains) input Ethernet ports Ethernet ports (2) Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional).
SONOS USER GUIDE If you purchased a Boost to extend the range of your Sonos system, place the Boost in between the Sonos speaker that’s out of reach and the rest of the Sonos system. Wall mounting 1. Choose a location that’s close to an electrical outlet (power cord length is 6 ft. / 1.8m), away from heat sources, hidden wiring, gas lines, etc. 2. Drive an American standard #6 round head screw (metric, M3.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE Play:5 Our biggest home speaker with the boldest sound— • Hardware and software custom-designed by Sonos to produce pure, immersive sound that’s crystal clear at any volume. • Powered by three tweeters and three mid-woofers, each with a dedicated amplifier, perfectly tuned to match the speakers and acoustic architecture. • Pair two Play:5s for left-right stereo sound, or use two Play:5s as rear surrounds for your home theater. • Works with either Sonos S2 or Sonos S1 .
SONOS USER GUIDE Controls and lights Volume control Touch and hold to quickly change the volume: • Volume up (right) • Volume down (left) Play/Pause • Press once to play or pause music. • Press and hold to add the music that’s playing in another room. Next/Previous song • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status.
SONOS USER GUIDE Connector panel Join button Ethernet port AC power (mains) input Stereo audio in Join button Press to connect during setup. Ethernet port Use the supplied Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional). AC power (mains) input Use only the supplied power cord (using a third-party power cord will void your warranty). Note: Insert the power cord firmly until it is flush with the bottom of the speaker.
SONOS USER GUIDE • For a single Play:5 speaker we recommend positioning the speaker horizontally, enabling stereo sound over a wide sound stage. (A single Play:5 speaker positioned in vertical mode is a mono speaker—there is no stereo separation.) • Place the Play:5 across the room from where you’ll be listening (at or close to your ear height for best results). • For stereo pair placement information, see Stereo pairs.
SONOS USER GUIDE Feature Ethernet Port Description One 10/100Mbps Ethernet port. You can plug a Sonos product directly into your router if your WiFi is unstable. General Power Supply Auto-switching 100 - 240V ~ 50-60 Hz 2.3A AC universal input. Audio Line-In Auto-detecting 3.5mm audio line-in connection. Dimensions (W x H x D) 14.33 x 8.03 x 6.06 in. (364 x 203 x 154 mm) Weight 14 lb / 6.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE Playbar Home theater soundbar and streaming music speaker in one— • • • • Sophisticated 9-speaker design. Simple two-cord setup. One for power. One for your TV. Mount horizontally above or below the TV or place flat on a TV stand. Easily expandable. Add a Sub and two Sonos speakers for 5.1 surround sound. For more information, see Sonos home theater. • Works with either Sonos S2 or Sonos S1 . • See Getting started when you’re ready to add a Playbar to your Sonos system.
SONOS USER GUIDE Controls and lights Volume up (+) Volume down (-) Play/Pause Press to adjust the volume. Note: You can also use the app and remote control. • Press once to play or pause music. • Press twice to skip to the next song (if applicable to the selected music source). • Press three times to go back to the previous song. • Press and hold to add the music playing in another room. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status.
SONOS USER GUIDE AC power (mains) input Use only the supplied power cord (using a third-party power cord will void your warranty). Note: Insert the power cord firmly until it is flush with the speaker. IR repeater Allows the commands from your remote control to reach your TV if the Playbar is positioned in front of the TV. This setting is on by default, but can be turned off in the room’s settings. Select a location You can mount the Playbar to a wall above or below your TV or place it on a credenza.
SONOS USER GUIDE Connect the cables Before you start 1. Disconnect existing home theater or surround sound equipment from your TV. 2. Connect any external devices, like a cable box or DVD player, directly to your TV. Connect the soundbar to your TV 1. Remove the protective cap from each end of the optical audio cable. 2. Connect the optical audio cable from your TV’s digital audio OUT (optical) to the Playbar’s digital audio IN (optical). Don’t twist or bend the cable.
SONOS USER GUIDE • Preserve audio quality: make sure the connector panel faces away from the TV. • Keep both ends of the Playbar at least 1 ft. (30cm) from a wall or other obstruction. Note: Connect the power and audio cables to the Playbar before mounting to the wall. What you need • • • • Masking tape Pointed tool (like an awl) Phillips head screw driver Power drill with Phillips head attachment Note: There are 2 spare screws (and anchors) included in the kit.
SONOS USER GUIDE 2. Use a pointed tool to pierce through the template and mark the mounting holes. Mark closer to the corners of the holes. 3. Remove the template. 4. Drill pilot holes. Wall mounting information Wall Material Pre Drill Use Wall Anchors Use Screws Wood Stud 1/8" (3 mm) bit No Yes Drywall (no stud) 3/16" (4.5 mm) bit Yes Yes Hard wallboard or double board 3/16" (4.5 mm) bit Yes Yes Plaster 1/4" (6.5 mm) bit Yes Yes Concrete or Brick 1/8" (3 mm) bit Yes Yes 5.
SONOS USER GUIDE 6. Place the bracket on the wall and loosely tighten the screws to secure the bracket. Check with a level and then tighten the screws. 7. Hang the Playbar securely on the bracket pegs.
SONOS USER GUIDE Specifications Feature Description Audio Amplifier Nine Class-D digital amplifiers perfectly tuned to match the nine dedicated speaker drivers and the acoustic architecture. Tweeter Three tweeters create the crispest and clearest high-frequency response. Mid-Woofer Six mid-woofers give you the full range of sound effects and music from the left and right channels, and crisp, clear dialog from the center.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. If your product is wallmounted: • Improper or inadequate wallmount installation could cause your device to fall, resulting in personal injury. • Never hang from the Sonos product or the wall bracket. • Once wall-mounted, periodically check to ensure screws remain securely tightened. 5.Do not use this apparatus near water. 6.
SONOS USER GUIDE Playbase Full-theater sound and music streaming for TVs on stands and furniture— • • • • Slim tabletop design practically disappears under your TV. Securely supports TVs up to 75 lb (34 kg). Simple two-cord setup. One for power. One for your TV. Easily expandable. Add a Sub and two Sonos speakers for 5.1 surround sound. For more information, see Sonos home theater. • Works with either Sonos S2 or Sonos S1 .
SONOS USER GUIDE Controls and lights Volume control Play/Pause Next/Previous song • Touch and hold to quickly change the volume: • Volume up (right); Volume down (left). Press to play or pause sound. • Swipe right across the touch controls to skip to the next song. • Swipe left to go to the previous song. Note: You can’t skip forward or go back when listening to a radio station. Status light Indicates the status. Learn more If the light is distracting, you can turn it off in your room’s settings.
SONOS USER GUIDE Connector panel Join button Ethernet port AC power (mains) input Digital audio IN (optical) Ethernet port Use the supplied Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional). You should only use this port to plug in either the Playbase, Sonos Bridge, or Sonos Boost. Digital audio IN (optical) Use an audio optical cable to connect the Playbase to your TV.
SONOS USER GUIDE Select a location You can place the Playbase under your TV or on a shelf. Under TV with single foot stand • Lift the TV and put Playbase under it with the Sonos logo facing front. • Make sure the TV stand rests completely on the Playbase with no overhang. • Your TV should not weigh more than 75 lb (34 kg) • Allow at least 1" between Playbase and other surfaces, like walls or cabinets.
SONOS USER GUIDE Connect the cables 1. Disconnect existing home theater or surround sound equipment from your TV. 2. Connect any external devices, like a cable box or DVD player, directly to your TV. Connect Playbase to your TV 1. Remove the protective cap from each end of the optical audio cable. 2. Connect the optical audio cable from your TV’s digital audio OUT (optical) to the Playbase’s digital audio IN (optical). Don’t twist or bend the cable.
SONOS USER GUIDE Note: The Playbase’s digital audio IN port and the optical cable are ‘D-shaped’—make sure the connector aligns correctly into the port. IMPORTANT: Remove the protective caps from each end of the optical audio cable. Connect the power cord Attach the power cord and plug in the Playbase. Push the power cord firmly into the Playbase until it is flush with the surface. If you don’t have the app, download it from the app store. You’ll use it to set up and control your Sonos system.
SONOS USER GUIDE Feature Description Networking* Wireless Connectivity Connects to your home WiFi network with any 802.11b/g/n router. 802.11n only network configurations are not supported—you can either change the router settings to 802.11b/g/n or connect a Sonos product to your router. Ethernet Port One 10/100 Mbps Ethernet port. You can plug a Sonos product directly into your router if your WiFi is unstable. General Power Supply Auto-switching 100 - 240V ~ 50-60 Hz 2.3 A AC universal input.
SONOS USER GUIDE Important Safety Information 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos components. 7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
SONOS USER GUIDE Accessories Find the perfect accessory for your Sonos system—tailored to perfectly fit your Sonos products. • Sonos Stand • Sonos Shelf • Wall Mount for Arc • Wall Mount for Beam • Wall Mount for Playbar • Sonos Architectural by Sonance speakers For the full selection of Sonos-compatible stands, wall mounts, and cables, see Accessories on our website. Sonos Stand A set of custom-designed stands for Sonos One and Play:1 provide an elegant solution for placing your home theater surrounds.
SONOS USER GUIDE Assembling your Sonos Stand 1. Take everything out of the box and place the base in the packaging slot to stabilize it for the next few steps. Unplug your Sonos speaker, and thread the speaker end of the power cord through the opening in the base. 2. Insert the stem snugly into the base, using the alignment pins to position the power cord channel either in the front or back. Use the 2 black screws and a Phillips-head screwdriver to attach the base.
SONOS USER GUIDE 3. Route the speaker’s power cord through the speaker platform. 4. Use the 2 silver screws to attach the speaker platform to the top of the stem, threading the power cable carefully. Snap the bottom plate on with the power cable channel in the back, and mount the platform on the stem.
SONOS USER GUIDE 5. Plug the power cord back into the speaker and place on the top mount, pulling any extra cable down from the top. Tighten the screws and attach the top cap with the notch facing toward the speaker. 6. Press the power cord into the stem, working from top to bottom. Pull the excess cable down from the base.
SONOS USER GUIDE 7. Tilt the stand forward slightly to wrap the excess cord around the bottom of the base. Plug the speaker’s power cable into the wall and enjoy the music! Sonos Shelf The easy-to-install shelf for Sonos One and Play:1 securely holds your speaker in place—its space-saving design provides a designated space for your speaker. • Designed to support up to 8 lbs (3.6 kg) • Dimensions (H x W x D): 0.89 x 10.23 x 6.29 in. (22.7 x 260 x 160 mm) • Weight: 1 lb (0.
SONOS USER GUIDE What you’ll need • • • • Pencil Phillips-head screwdriver Power drill (if needed for installation location) Level Assembling your Sonos Shelf 1. Place the wall bracket against the wall and mark the screw holes. (Make sure the black bracket foam ring is face up.
SONOS USER GUIDE 2. If using wall anchors, use a 5/16" drill bit to drill 2 pilot holes and then insert the wall anchors. Refer to the wall mounting information below for guidelines. Otherwise skip this step.
SONOS USER GUIDE 3. Use a Phillips-head screwdriver or a power drill to screw the bracket to the wall. 4. Position the shelf the way you want it (supports left or right speaker placement). Press the shelf firmly on to the wall bracket until it snaps into place (both front and back).
SONOS USER GUIDE 5. Route the speaker’s power cord through the shelf opening. (You’ll wrap the cord around the bottom of the shelf after it’s assembled.) 6. Press the bottom cover firmly onto the shelf until it snaps into place, carefully aligning the pins. Plug the power cord into the speaker and place the speaker on top of the shelf.
SONOS USER GUIDE 7. Wrap the excess power cord around the bottom of the shelf. 8. Your shelf assembly is complete—time to play some music! Wall Mount for Arc See Wall mount for more information.
SONOS USER GUIDE Wall Mount for Playbar See Wall mount for more information Sonos Architectural by Sonance speakers Sonos Architectural by Sonance speakers include exclusively-designed audio enhancements when used with a Sonos Amp.
SONOS USER GUIDE Rooms Everyone in the house can listen to something different, or you can group Sonos products together to play the same music. If you have a home theater speaker, you can send the TV sound to other rooms, too. Tap on a mobile device to see what’s playing in each room. To change what’s playing, tap a room, and choose different content from Browse, Search, or My Sonos. Select to play the same music in more than one room.
SONOS USER GUIDE Turn off WiFi You can turn off your speaker’s WiFi when it’s connected to your network with an Ethernet cable. This reduces power consumption and can improve connectivity for some wired speakers. For products like Amp, Connect, and Connect:Amp, turning off WiFi can reduce the internal temperature when they’re placed in a rack or stacked.
SONOS USER GUIDE Sonos home theater Sonos products for your TV provide full-theater sound and play music too. Create a home theater system by adding a pair of rear surrounds and a Sub. • Arc and Arc SL: premium smart soundbar for TV, movies, music, gaming, and more. Place on furniture or wall mount. • Beam: compact soundbar with Amazon Alexa voice control, perfect for small to medium-sized rooms. Place on furniture or wall mount.
SONOS USER GUIDE TV autoplay TV Autoplay—if music or other content is playing when you turn on your TV, the audio automatically switches to TV audio (default). If you don’t want this to happen, turn off TV Autoplay in your room’s settings. Ungroup on Autoplay—if your home theater speaker is grouped with other products when you turn on the TV, it automatically drops from the group (default). If you don’t want this to happen, turn off Ungroup on Autoplay in your room’s settings.
SONOS USER GUIDE Play music There are lots of ways to get the music playing on Sonos—choose whichever control works best in the moment. • The Sonos app. The free Sonos app is the easiest way to play anything and everything on Sonos. Simply and choose from the list of music sources. open the app, tap • Voice commands. If you have a voice-enabled Sonos speaker, you can use your voice to play and control the music. Ask Alexa to play your favorite radio station or the top hits on Spotify.
SONOS USER GUIDE Volume control Control the volume on your Sonos system several different ways—whatever works best in the moment. • Speaker touch controls: when you’re near a speaker, adjust the volume or stop the music using the touch controls on the speaker. • The app: slide the volume control up or down. If products are grouped, you can adjust the volume for the whole group or for individual speakers.
SONOS USER GUIDE Voice services You can use your voice to play and control songs, playlists, radio stations, and more. • Amazon Alexa: you’ll need the Sonos app and the Alexa app with the Sonos skill enabled. You’ll make some changes in both apps during setup. Learn more • The Google Assistant: you’ll need the Sonos app and the Google Assistant app. You’ll make some changes in both apps during setup. Learn more • Siri: you’ll need the Apple Home app.
SONOS USER GUIDE Alarms and sleep timer Wake to music you love by setting an alarm with a favorite song, station or playlist. Learn more. • Wake up to different songs, radio stations or playlists on different days. • Have your favorite songs rocking when you come home from work. • Schedule Sonos to play for a few hours every night you’re on vacation. Want to catch a few more z's? Turn on Snooze Alerts when you set an alarm. Sleep timer Love to fall asleep to music? Sonos can shut off automatically.
SONOS USER GUIDE Sonos system updates Sonos regularly adds new features so your listening experience is always improving. You can set your Sonos speakers to update automatically in the background so you always have the latest features without interrupting your listening. Learn more.
SONOS USER GUIDE Have a new router or network password? If you have a wireless setup (no Sonos product connected to your router): After you install a new router or change your network password, update your Sonos system with the new network information. Just open the Sonos app and we’ll walk you through it.
SONOS USER GUIDE Product guide feedback? We’d love to hear from you! We’ll read your feedback carefully and use it to help us improve our product guides. Write to us at: docfeedback@sonos.com If you’re having a problem with your Sonos system, please contact Customer Care at www.sonos.com/ support. Need more help? Get some simple tips for getting the most out of your speakers. • Using Sonos S2, tap > Support. • Using Sonos S1, tap > Help & Tips. Visit our Frequently Asked Questions (FAQ) pages at www.
a ance >II + Stream over WiFi at home, use Bluetooth anywhere Bluetooth Press and hold the power button until you hear the pairing tone >11 >11 + Play/ Pause Group or swap Volume up Single press Press & hold to group Sonos products; continue holding to swap audio between them >11 Next track Double press >11 Previous track Triple press t Microphone Press for voice assistants and microphone-related features Volume down
Q) Customer Support sonos.com/support U r Guide Se m/guides/roam sonos.co Terms of Use, License and Warranty /legal/terms-of-use sonos.com • Sonos Roam. www. ed Sonos • C 2021 Sonos, Inc. :;;~::,r,:~~~ered trademarks of and Roam a~e trat\ Pat & TM Off. Sonos. Inc. Reg. ~.
Important Product Information For Terms of Use, License and Warranty, and additional product information: www.sonos.com/guides The installer of this radio equipment must ensure that the product is located such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada's Web site www.hc-sc.gc.ca/rpb. As mentioned before, the installer cannot control the antenna orientation.
Important Safety Information 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sanos components. 6. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves. or other apparatus that produce heat. 8.
Guides ) Ray •
Overview The compact soundbar for music, TV, and more• Quick and easy setup, with only one cable to connect to your TV. • Great sound for compact spaces-versatile design allows you to set it on a credenza, mount it on a wall, or place it inside a TV stand. • Stream music, radio, podcasts, and more when the TV is off. • Expandable. Add a Sub and two Sonos speakers, like Ones, for 5.1 su rround sounc1 • Control your Sonos system with the Sonos aRR (for Android and iOS).
Controls and lights Touch for small adjustments or touch and hold to quickly change the volume: Volume ,c ontrol • Volume up (right) • Volume down (left) N,o,te: You can also use the Sorios app or your TV remote. Play/Pause Touch to play or pause audio.
• Swipe rig'ht across the touch controls to skip to the next song. Next/Previous (music only} • Swipe left to go to the previous song. Note: You can't skip forward or go back when listening to a radio station. Displays the prod uct's connection Statu,s light to WiFi, indicates when the volume is muted , and signals errors.
Connector panel • • • • Join button Press to connect during setup_ AC power (mains) i nput Use only the supplied power cord (using a th irdparty power cord will void your w arranty)_ Optical port Use to connect the souridbar to your TV Ethernet port Use an Ethernet cable if you want to connect to a router, computer, or network-attached storage (NAS) device (optional)_
Select a location You can wall mount Ray above or below your TV, or place it in or on a TV stand. TV stand placement • Place horizontally on a stable and level surface at least 2" (50mm) from the TV. • Don't place vertically or on its side. • Don't block the TV's IR sensor. • If put on a shelf, place at the front and keep 2" (minimum) clearance on both sides for best sound quality. • Keep 1" (25m m) space (minimum) above Ray so you can reach the touch controls.
Connect the cables, Before you start • Disconnect existing home theater or surround sound equipment from your TV. • Connect any external dev ices, like a cable box or DVD player, directly to your TV_ • Turn your TV on. 0 Connect the power cord and plug in the soundbar. INote: Use only the supplied power cord (using a third-party power cord \viii void your warranty).
Connect the optical cable (included) to the optical port on the back of your soundbar. Connect the optical cable to your TV's optical digital OUT port (The Ns optical adapter's port is "D-shaped~make sure the connector aligns correctly into the port. Inserting the adapter incorrectly may damage the cable.
Product settings You can customize Sonos prod ucts for your surrounding s. Go top > System and select a product. Room Name If you move your speaker to a new room, you can change its name in settings . You can turn off your speaker' s WiFi when it's connected to your network with an Ethernet cab le. Tum off W iFi {not on po:rtable products) Thi s reduces power consumption and c an improve connectivity for some wi red speakers.
Home th,eater Sonos products for your TV provide full-theater sound and play music too. Create a home theater system by adding a pair of rear surrounds and a Sub. Home theater settings Use the Sanos app to adjust sound settings or change the w ay your home theater speaker works with your TV. If the TV audio is out of sync w ith the video, you can TV Dialog: Sync adjust the audio delay (lip sync) in your room's settings.
Set up surround speakers, It's easy to tum two Sanos speakers (same rnodel), or a So11os Amp and your favorite non-Sonos speakers, into separate right and left channels for your home theater. 1. Place ead 1 surround speaker about 10ft from your favorite listening position, angling them toward the seating area. 2. Go to -(l- > Sy stem. 3. Select a room with a soun.dbar and choose Add .Surround s to get started. Note: If you gmup the rooms air create a stereo pai r instead, you won't have surround sound.
Trueplay™ Every room is different. Trueplay tun ing measu res how sound reflects off walls, furnishings, and other surfaces in a room, then fine tunes you r Sonos speaker to make su re it sou nds great no matter where you've placed it. Trueplay works on iOS mobile devices ru nni ng iOS 8 or later. During tuning, you'll move around the room holding your mobile device. 1. Select¢-> System, and pick the room you want to tune. 2. Choose Trueplay Tuning to get started.
Walll mo1 unt Use the Ray wall mount kit (sold separately1 available at s,o nos..com). It's designed for mow1ting on a flat w all. Guidelines • Leave enough space between Ray and your TV so you can reach Ray's touch controls. • For best sound qua lity, keep both ends of Ray at least 1' (30cm) from a wall or other obstruction.
Wall mount Pre-drill Use wall anchors Use screws Wood stud 1/8" / 3mm bit No Yes Drywall (no stud) 5/ 16" I 8mm bit Yes Yes 5/ 16" I 8mm bit Yes Yes Plaster 5/ 16" 18mm bit Yes Yes Concrete or brick 5/ 16" 18mm bit Yes Yes Hard wallboard or double board
Set it up ~ ~ ~✓, 1/ ~ .,,,,-,-,., / _,, .,.. ,· ,, ,__,,.
• If your TV is wall-mounted, align the top ed ge of the bracket with the bottom of your TV, leaving at ,,.,./-✓l least 2.5 inches (mm) between them_ /' 1. . ~ • I:'. Mark the screw locations and remove the bracket /,,./ ~ '"~ ; / • If you're using wall anchors, use a 5/1 6" drill bit to drill pilot holes, starting with the hole on the left Then insert the wall anchors. Don't use wall _,./•·· ,:·,,,,, 1·, .,,._•·. // .......· anchors if you're drilling into wood or plastic.
0 Using a Phillips head screwdriver, fasten the 2 attachment screws to the back of the sound bar, making sure they are fully tightened . G Remove the protective cap from the optical cable, then connect the power and optical cables to the back of the soundbar. 0 Slide the soundbar down so the attachment screws fit into the slots on the wall bracket. Make sure the touch controls are facing up and Sones Ray is fully seated.
Specifications :Feature Description AUDIO Amp lifiers Four Class- □ digital amplifiers. Two full-range w oofers ensure you'll hear the faithful Woofers pl ayback of mid-range vocal frequencies plus deep, rich bass. Tweeters Aud io ports Adjustable EQ Two tweeters create a crisp and clear high-frequency response. Two micro ports with proprietary anti-d istortion technology. Use the Sonos app to adjust bass, treble , and loudness.
GENERAL Oiiim ensii-o ns {H x W x D) 2.79 x 22.00 x 3.74 in (71 x 559 x 95mm) Co:li-o rs Black, w hite Finish Matte Weight 4.29 lb (1 95 kg) S:peaker status lig:ht Displays the speaker's con nection to W iFi, indic ates when the volume is muted, and signals errors. Operating temperature 32°F to 104° F (0° C to 40~ C) Stora-g-e temperature -4°F to 122° F (-20° C to 50° C) Control Use your IR (infrared-enabl'ed) TV rem ote control, touch controls or the Sonos app. CPU Quad Core; 1.
POWER & CONNECTIVITY Power supply Auto-switching 100-240 V, 50-60 Hz 2.0A AC universal input Connects to WiFi network with any 802.1 1b/g/n, 2.4 GHz broadcast-capable router. WiFi 802.11 n only network config urations are not supported - you can either change the router settings to 802.1 1 b/g/n or con nect a Sones prod uct to your router. Optical Use the incl uded optical cable to com ect the soundbar to you r TVs optical digital audio output.
Important safety informatiion 1. Read these instructions. 2. Keep these instructions. 3. Heed all wam ings. 4. Follow all instructions. 5. Do not use this apparatus near 1,vater. 6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Play and control audio using the Sonos app, your TV remote, or the touch controls on Ray.
>11 :P\ Play/ Pause Next Track Single press Swipe right >11 :: ( Group Previous Track Press and hold to group Sanos products Swipe left •• •• Volume Press left to decrease, right to increase )II )II ) :: /Q:
Customer Support sonos.com/support User Guide sonos.com/guides/ray Terms of Use, License and Warranty www.sonos.com/legal/terms-of-use C 2022 Sonos, Inc. All rights reserved. Sonos•, Sonos Ray, and Ray are trademarks or registered trademarks of Sonos, Inc. *Reg. U.S Pat & TM Off.
Important Product Information Terms of Use, License, Warranty, and Privacy To use this Sonos product you have to accept the Sonos Terms of Use, License and Warranty Agreement, available at www.sonos.com/legal/terms -of-use. Sonos privacy statement is available at www.sonos.com/legal/prlvacy. For additional product information: www.sonos.com/ guides.
Important Safety Information 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. a. Do not install near any heat sources such as radiators. heat registers, stoves.
• 610-00097 MIX Packaging FSC Fsc· C103297
