Operation Manual
13
English
To end the function, press 9. MENU twice and then press SKIP FORWARD repeatedly until the
indicator at the bottom of the display disappears.
Then press 10. MENU again to conrm your selection.
6.7 Mute
During audio playback, press the SNOOZE button to mute the sound. Push the button again to
turn the sound back on. Mute will appear on the display. While the device is set to Mute, all the
other buttons do not function.
6.8 Automatic switch-off
While the device is in operation, press 1. MENU and then SKIP repeatedly until SLEEP ap-
pears on the display.
After pressing the 2. MENU button again, you can use the volume controls to set the number
of minutes after which the device is to switch off automatically.
Use the Off setting to deactivate the function.3.
Conrm your choice by pressing 4. MENU.
7. iPod
®
playback (using optional eDock)
Connect the eDock to your cubo, as described in the eDock operating manual.
Whilst the device is switched on, use the MODE button to select iPod
®
mode. IPOD is shown
on the display. If no eDock or no iPod
®
is connected, the display will indicate “NO IPOD”.
Press the PLAY button to start or stop playback (Pause). The function of the SKIP buttons is
similar to that of CD playback in iPod
®
mode. Use the STOP button to get to the respective
higher level of your iPod
®
(iPod
®
not supplied); the display will indicate MENU. In this case
the Skip buttons navigate through the individual levels of the iPod
®
, the PLAY button conrms
your selection. If no entry is made within 6 seconds, your cubo will switch back to normal
iPod
®
mode. The eDock of course also works with the iPhone, although to do this it has to be
switched to Airplane mode.
For details regarding the operation of your iPod
®
, please consult your iPod
®
operating manual.