User Manual
Table Of Contents
- PLATNIUM_SE_SO-2000_operating_manual_cover_page4
- PLATINUM_SE_SO-2000_manual_R07
- Bedienungsanleitung
- 1. Einleitung
- 2. Lernen Sie Ihren PLATINUM SE kennen
- 3. Plattenspieler montieren
- 4. PLATINUM SE anschließen
- 5. Eine Aufnahme abspielen
- 6. Wenn die Wiedergabe beendet ist
- 7. Verbindung mit Bluetooth-Gerät herstellen
- 8. Anschließen an einen Computer
- 9. Wartung
- 10. Fehlerbehebung
- 11. Garantie
- 1. Introduction
- 2. Getting to know your PLATINUM SE
- 3. Assembling the turntable
- 4. Connecting PLATINUM SE
- 5. Playing a record
- 6. When playback finishes
- 7. Connecting with Bluetooth device
- 8. Connecting to a computer
- 9. Maintenance
- 10. Troubleshooting
- 11. Warranty
- 1. Introduction
- 2. Découvrez votre PLATINUM SE
- 3. Assemblage de la platine
- 4. Branchement de votre PLATINUM SE
- 5. Lecture d'un enregistrement
- 6. Une fois la lecture terminée
- 7. Connexion à un appareil Bluetooth
- 8. Connexion à un ordinateu
- 9. Entretien
- 10. Dépannage
- 11. Garantie
- Platinum_SE_manual_last_page2
GB
© sonoro audio GmbH 2021 33
• Remove the red ribbon from the drive belt.
• Rotate the turntable several times to make
sure that the drive belt is secure and rotating
smoothly.
4. Placing the cork mat
• Place the cork mat of the platter on the
platter.
5. Installing the counterweight
• Place the counterweight over the end of
tonearm, and slowly turn it anti-clockwise
while gently pushing it.
6. Installing the headshell
• Insert the headshell on the end of tonearm.
• Turn the lock nut clockwise direction to
secure the headshell.
7. Removing the stylus protective cover
• Hold the stylus protective cover from it’s front
and back.
• Slowly move the cover downward.
8. Setting the tonearm balance
• Set the anti-skating dial to zero.
Lock nut
Counterweight
Ribbon
Anti-skating dial