Installation & Assembly

November 24, 2015

1 of 2

LED Product Information and Warnings

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

• Please read all included assembly instructions and warnings carefully before installation. Contact

Customer Service if you have any questions or concerns. Before installation, please conrm that the xture

is compatible with your supply voltage and dimming system, if present.

• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory

sealed compartments, and avoid touching the LEDs with your hands or any object.

• Although all our xtures are equipped with protective devices, LED xtures are vulnerable to power surges

and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC

systems.

• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not

replace or substitute with another power supply.

• Remote LED Driver or Transformer installation must be done by a licensed electrician and in accordance

with local codes. Remote installations should be in an accessible location, as close to the xture as possible.

• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or

wire them in series.

• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built,

and improper connections may damage the xture.

• The ends of coaxial pendant cords have been precisely stripped and split at the factory and must not be

eld cut. Excess cord or cable should be neatly coiled and reserved in the xture canopy.

• Any mounting hardware is provided for your convenience and should be used with discretion. Always use

the appropriate hardware for the mounting surface.

PAGE 1
November 24, 2015 LED Product Information and Warnings Important • Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance. • Consult a qualified, licensed electrician to ensure correct branch circuit conductor. • Please read all included assembly instructions and warnings carefully before installation. Contact Customer Service if you have any questions or concerns.
PAGE 2
November 24, 2015 Assembly Instructions 7223 INSTRUCTIONS D’INSTALLATION Shear Series - Large Sconce Important • Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance. • Consult a qualified, licensed electrician to ensure correct branch circuit conductor. Consulter un électricien qualifié pour vous assurer que les conducteurs de la dérivation sont adéquats. J I H G E Fig. 2 D F A C B Fig. 1 Fig. 3 1. Shut off power to the outlet box (A). 2.