User's Manual

ManualsBrandsSomfy Systems ManualsElectronicsSWF Basic Remote Control BR-01

1. Adding

Setting -

Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press

Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button,

the shade will jog. The position is saved to the shade, repeat to set a new home position.

Using -

Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade

position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is

actively moving, the Stop/Intermediate button would need to be pressed twice.

Setting -

Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press

Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button,

the shade will jog. The position is saved to the shade, repeat to set a new home position.

Using -

Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade

position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is

actively moving, the Stop/Intermediate button would need to be pressed twice.

Setting -

Press Up or Down to operate shade with Single Channel Remote. Bring shade to desired position, press

Stop/Intermediate to stop the shade. At desired position, press and hold the Stop/Intermediate button,

the shade will jog. The position is saved to the shade, repeat to set a new home position.

Using -

Send the shade to the intermediate position by pressing the Stop/Intermediate button from any shade

position. Note: Shade should be stationary prior to pressing the Stop/Intermediate button, if the shade is

actively moving, the Stop/Intermediate button would need to be pressed twice.

1. Adding

Adjusting the Upper or Lower Limit of your shade, Single Channel Remote

1. Adding

Adding a control, Virtual Cord™

Setting an Intermediate (Home) Position, Single Channel Remote

Adding a Control, Single Control Remote

If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control.

Press and hold the shade end cap until the shade jogs (a brief up and down movement).

The control and shade endcap will flash green with solid red, confirming that you are ready to pair the

control.

On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing

button. The shade will jog.

Control is now saved to the shade.

If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control.

Press and hold the shade end cap until the shade jogs (a brief up and down movement).

The control and shade endcap will flash green with solid red, confirming that you are ready to pair the

control.

On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing

button. The shade will jog.

Control is now saved to the shade.

If the previous Virtual Cord™ is lost or damaged, follow these steps to add a new control.

Press and hold the shade end cap until the shade jogs (a brief up and down movement).

The control and shade endcap will flash green with solid red, confirming that you are ready to pair the

control.

On the back of the Virtual Cord™ control, use a paperclip or similar item, press and release the programing

button. The shade will jog.

Control is now saved to the shade.

If adding a new remote, follow these steps:

A. When the Virtual Cord™ is not present

Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red.

Confirming that you are ready to pair the control.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

B. Using the Virtual Cord™ Control, Copy and Paste

On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming

button until the shade jogs. The shade endcap will flash green, with solid red.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

If adding a new remote, follow these steps:

A. When the Virtual Cord™ is not present

Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red.

Confirming that you are ready to pair the control.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

B. Using the Virtual Cord™ Control, Copy and Paste

On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming

button until the shade jogs. The shade endcap will flash green, with solid red.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

If adding a new remote, follow these steps:

A. When the Virtual Cord™ is not present

Press and hold the shade endcap until the shade jogs. The shade endcap will flash green with, solid red.

Confirming that you are ready to pair the control.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

B. Using the Virtual Cord™ Control, Copy and Paste

On the back of the Virtual Cord™ Control, use a paperclip or similar item, press and hold the programming

button until the shade jogs. The shade endcap will flash green, with solid red.

On the back of the Single Channel remote, use a paperclip or similar item, press and release the

programming button. The shade will jog.

The control is now saved to the shade.

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and

down movement.)

The control and shade endcap will flash orange and green, confirming that you are in programming mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and hold the Stop/Intermediate button on the control, until the shade jogs.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flahses.

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and

down movement.)

The control and shade endcap will flash orange and green, confirming that you are in programming mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and hold the Stop/Intermediate button on the control, until the shade jogs.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flahses.

If adjusting the upper or lower shade limits, follow these steps:

Bring the shade to the upper or lower limit by pressing Up or Down button.

Once at the limit, press and hold Up and Down buttons at the same time until shade jogs. (A brief up and

down movement.)

The control and shade endcap will flash orange and green, confirming that you are in programming mode.

Adjust the shade using the Up or Down button to your desired new limit.

Press and hold the Stop/Intermediate button on the control, until the shade jogs.

The new limit is saved to the shade and programming is complete. The shade endcap light no longer

flahses.

For Optional Single Channel Remote

For Optional Single Channel Remote • For Optional Single Channel Remote

Operating your shade, Single Channel Remote

Operando su persiana, Single Channel Remote

Fonctionnement du store, Single Channel Remote

Down

Light Indicator

Stop/Intermediate/Home Position

Program Button

Program Buton

79056-00 (07/14)

Springs Window Fashions • Middleton, WI 53562-1096 • www.springswindowfashions.com

NOTE: Pressing the opposite direction button while shade is moving will stop the shade movement.