User's Manual
Table Of Contents
Confidential & Proprietary 27/39
The required part number is JOCT 16-6 supporting AWG 6. The way to install the grounding cable comply
with below procedures
Figure 4.8 – How to install Ground Terminal
The procedures are
1. Loosen a two M6 screws and then take compression terminal off
2. Insert AWG#6 Grounding Wire into terminal and then compress a terminal using tool
3. Assemble the terminal which made in step “2” using 2xM6 screws
4. Cut the ground wire to proper length and connect it to the earth ground source