76K0001 Please scan the below QR code to get the video for easy installation.
01 Safety Information 07 08 09 10 11 02 03 04 05 06 02 WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades. Warning: Kindly turn off the power when connecting cables. WARNING: To reduce the risk of fire or electric shock, this fan is NOT suitable for use with solid-state speed controls.
03
04
05
06 1.Connecting 10 and 7 2.Tighten the blade screws 3.Tighten all the blade screws 4.Loosen the screw 5.Install the blades 6.
06 7.Connecting 13 to the fan light 9.Lossen the screw 9.Tighten the screws 8.Tighten the screws 10.Passing the wire through “2” 10.
06 11.Put the decorative cover throught the downrod 12.Put the canopy cover through the downrod 13.Put the canopy throught the downrod 14.Put the rod ball throught the downrod 15. Put the lock washer to the hole of the downrod and push the rod ball to the top of the downrod 16.
06 17.Install the mounting bracket, tighten the screw 18.
06 19.Connect the wires connector 21.Put the receiver into the mounting bracket 23.Use wire connecting nuts to connect the live wire coming fromthe receiver, house and neutral wire coming from the receiverand house. 20.Connect the balck and white wire 22.Use wire connecting nuts to connect the two ground wires( green) coming from the downrod and hanging bracket 24.
06 25.Push the canopy cover to the canopy 26.
07 ① ⑤ ② ⑥ ① Fan ON/ OFF ② Fan Speed + ③ Fan Speed - ④ Foward/ Reverse ③ ⑦ ⑤ Light ON/ OFF ④ 8 ⑥ Warm light/ Brightness Dimmer(Long Press) ⑦ Neutral light/ Brightness Dimmer(Long Press) 8 White light/ Brightness Dimmer(Long Press) After the reversible button is pressed, the fan slowly slows down to a stop. And then it started to reverse.
08 3s 2. The Learn Key must be pressed within 5 seconds, after turning on the main switch. Keep pressing the button LEARN key in excess of 3 seconds it becomes a LEARN status. 3. The indicator light of the remote flashes two times and the code is successful.
09
10 11