KBS-66K002SMTY Please scan the below QR code to get the video for easy installation. Email:sofucor_service@163.com Email:sofucorceilingfan@163.com Website: www.sofucorfan.
01 Safety Information 1 Remote control manual 13 Warranty 2 3 Match code Fans Balance 14 15 4 5 Care and cleaning Three ceiling installation methods Accessory drawing Installation procedure Trouble shooting Connecting Smart Systems 16 16 17 02 WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades. Warning: Kindly turn off the power when connecting cables.
03 2
04 5 9 5 2 9 2 3 9 3 3
05 4
06 Install the blades 1. Connect the blades and spokes 2. Pay attention to the front and back 3. Take out the screws 4.
06 Install the light plate 5.Loosen two screws, take out one 6. Install lamp plate, Retighten the three screws 7. Loosen the original screws on the light plate 8.
06 Install the downrod 9. Retighten the three screws 10. Disassemble the downrod(No.15) 11. Thread the motor wires into the rod 12.
06 Install the coverage 13. Tighten the screws 14. Put the decorative cover(No.1) through the downrod 15. Put the canopy cover(No.10) through the downrod 16. Put the canopy(No.
06 Install the rod ball 17. Put the rod ball through the downrod 18. Put the lock washer to the hole of the downrod and push the rod ball to the top of the downrod 19.
06 Black White 10
06 Wiring and installation 20. Connect the wire from the ceiling fan to the receiver(No.1-Red, White and Black wires)( No.2-Red, White and Yellow wires) 21. Install the mounting bracket, tighten 22. Install to ceiling mounting bracket 23.
06 Fixed coverage 24. Cover the canopy. 25. Tighten the screw 26. Push the canopy cover to the canopy 27.
06 07 Connect to app settings Connect to app settings: If you power on the fan for morethan 3 minutes,you will not be able to search for the device.At this time, you need to reset your fan:turn fan power Off and back on at the wall switch, within 30 seconds,press the "POWER" button for 5 seconds to reset. If the reset is successful,the light flashes,then add the Device again. After the reversible button is pressed, the fan slowly slows down to a stop. And then it started to reverse.
08 2. Setting the codes on the receiver: The Learn Key must be pressed with in 5 seconds,after pressing the Power button. If not,please press the Power button to restart.Keep pressing the button LEARN key in excess of 3 second it becomes a LEARN status. 3s 3. The receiver Can remember the last codes status. The ceiling fan light flash two times.
09 15
10 11 11 Website: www.sofucorfan.
17
18
19
20
Link skill to the Amazon Echo or Google Assistant Devices In the App, change the name of the device to an easily identifiable name such as bedroom light, bedroom fan. Make sure your Amazon Echo device is powered on and connecting to your home Wi-Fi network. Common commands Fan: Alexa, tum on/off . ● Alexa, what is the speed? ● Alexa, set the speed to 1/2/3/4/5/6. ● Alexa, setthe bedroom speed to max.