User Instructions

24 EN
DIRIS Digiware M-50 & M-70 - 548751C - SOCOMEC
10.2.2. “Protocols” tab
Once the system is fully congured to visualise measurements and consumption on WEBVIEW-M, the communication
protocols which will be used by the M-50/M-70 gateway to exchange data with an external supervisor (SCADA, Energy
Management System, etc.) can be congured from the “Protocols” tab.
 •NetworkConguration
This tab allows you to modify the gateway’s IP conguration:
After modifying those parameters, a reboot of the M-50/M-70 gateway is necessary.