Instructions / Assembly

A Division of Snow Joe

, LLC

Model SJ-SHLV02

SHOVELUTION

18" CLEAR SNOW SHOVEL

ASSEMBLY INSTRUCTIONS

FOR STORAGE:

Make a loop with the retaining strap around the spring-loaded

handle, and with the other end, secure to knob on the upper

pole.

NOTE: If you have further questions, please contact the Snow Joe

Sun Joe

customer service center at 1-866-SNOWJOE (1-866-766-9563).

mCAUTION!

HANDLE IS SPRING LOADED UNDER HEAVY TENSION.

To avoid injury, securely grasp handle before cutting zip ties.

Then, remove retaining strap and save for later storage.

TO DISASSEMBLE:

Follow instructions above in reverse order.

TO ASSEMBLE:

1. Depress the small button at the end of the lower pole, push

and insert the lower pole into the poly blade unit until it snaps

securely into place.

2. Remove the knob and the bolt from the upper pole.

3. Insert the top of the lower pole into the upper pole.

4. Align bolt holes, insert the bolt into the square hole,

through pole.

5. Tighten with the knob.

PAGE 1
R SHOVELUTION 18" CLEAR SNOW SHOVEL TM ASSEMBLY INSTRUCTIONS Model SJ-SHLV02 A Division of Snow Joe®, LLC © 2017 by Snow Joe®, LLC All rights reserved. Original instructions. mCAUTION! HANDLE IS SPRING LOADED UNDER HEAVY TENSION. To avoid injury, securely grasp handle before cutting zip ties. Then, remove retaining strap and save for later storage. TO ASSEMBLE: 1.
PAGE 2
R PELLE À NEIGE TRANSPARENTE SHOVELUTION 46 cm (18 po) MC INSTRUCTIONS D’ASSEMBLAGE Modèle SJ-SHLV02 © 2017 by Snow Joe®, LLC Tous droits réservés. Instructions d’origine. A Division of Snow Joe®, LLC mMISE EN GARDE! UN RESSORT EXERCE UNE FORTE TENSION SUR LE MANCHE. Pour éviter de vous blesser, tenez fermement le manche avant de couper les liens qui l’attachent. Retirez ensuite la sangle de retenue et mettez-la de côté pour l’utiliser quand vous remiserez l’outil. POUR ASSEMBLER : 1.