Super Titan Owner’s Manual
(40”) 38” 17(17”) 1/2” SNAPSAFE® SUPER TITAN FEATURES: Thank you for purchasing a SnapSafe® Super Titan. The SnapSafe Kwik-Lock™ Modular Assembly System offers all the impregnability of a welded safe in an easy-to-assemble modular design. Now, you have the peace-of-mind knowing your valuables are protected from loss due to fire or theft. Best of all, you can easily locate and relocate this protection anywhere, piece-by-piece, to any room, in minutes.
#5 ASSEMBLING YOUR SNAPSAFE CLOSET VAULT ® #2 1. Unpack and lay out all parts. 2. Thread DOOR HANDLE SPOKES (Part #11) onto the hub on DOOR (Part #12). #1 3. Install a fresh high-quality 9V battery in the Entry Keypad. (See pgs 8 and 9). #3 4. Important – Remove temporary door hinge bolts from door hinges. 5. Enter the factory combination code and open the DOOR, then lift it off the DOOR FRAME (Part #6) and set aside. 6. Assemble Top, Bottom and Sides (Parts #1 through #4) first.
CHANGING YOUR COMBINATION CODE LOW BATTERY ALERT Write down and store a new 6-digit code (Do not store in vault). You cannot set the combination code to six (6) zeros (0). Your lock has a “Low Battery Alert.” If the Entry Keypad beeps repeatedly during an unlocking, the battery is low and needs immediate replacement. 1. Open vault door and lock it in open position. 2. Enter zero (0) six (6) times. One beep sounds indicating the entry is valid and the system is awaiting a code change. 3.
LOST COMBINATION CODE Our Technical Support at 1-877-214-4470 will help you once you have completed a Master Reset Code Request Form. This form can be faxed during regular business hours and must be returned completed along with a copy of a valid State ID. You will then be given a secured code that allows you to reset the vault to its original factory setting. THIS CODE DOES NOT OPEN THE VAULT. Once this step is complete, you will be given further instructions to open the vault.