Full Product Manual

FOR QUESTIONS, MISSING PARTS OR WARRANTY,
CONTACT SNAP-LOC NOT STORE OF PURCHASE.
FOR QUESTIONS, MISSING PARTS OR WARRANTEE,
CONTACT SNAP-LOC BEFORE STORE OF PURCHASE:
CARE AND MAINTENANCE
“SNAP-LOC E-TRACK SINGLES” AND ACCESSORIES
There are a lot of great accessories available with the Snap-Loc
System of products that are not written about here. Contact
Snap-Loc or visit www.snaploc.com for more detailed information.
1. “Snap-Loc E-Track Singles” strap anchors are rated at 3000 lb. Break
Strength (1361 kg.) and 1000 lb. Working Load (454 kg.).
2. “Snap-Loc E-Track Singles” can be used most anywhere. However it
is your responsibility to determine suitability for any particular use.
3. “Snap-Loc E-Track Singles” are only as strong as stated when what
they are fastened to is equally as strong.
4. Most Snap-Loc Accessories have the weight rating stamped into
them, but if not, contact Snap-Loc for details.
5. If unsure of how to use or care for any of our products contact
Snap-Loc immediately at contact@snaploc.com or 1-800-798-4521.
6. Chips, color fading and minor surface rust may happen. If Snap-Loc
E-Track Singles” and accessories still work safely, keep using them.
If you feel at any time the structural integrity of the part has been
compromised discontinue use and replace with new parts.
SNAP-LOC STRAPS
Straps tend to get destroyed faster than most other components.
Here are some ways to help prevent that.
1. Make sure nothing touches the E-Fitting release lever as this may
cause strap to come loose.
2. E-Straps with Cam are quick to use and less prone to scratching cargo
and hold very snug.
3. E-Straps with Ratchet can hold cargo very tight but do not overtighten
or damage may occur to anchor points.
4. After periods of use the Ratchet mechanism may not spin well. Apply
a very small amount of WD-40 lubricant just on the mechanical metal
and avoid lubricant contact with the surface.
5. Do not expose straps to sharp edges, acids, chemicals, vibrations and
things that may cause damage to fabric webbing.
6. Secure left over strap end to keep it from getting caught on wheels
and other objects especially when in motion.
7. Replace worn out or damaged straps. Visit www.snaploc.com
8. Color fading may happen. If strap still works safely, keep using it.
9. Stow away in a dry place away from direct sunlight.
CHOOSING LOCATIONS AND FASTENING METHODS FOR “SNAP-LOC E-TRACK SINGLES
Most discover so many new uses for “Snap-Loc E-Track Singlethat the installation choices are almost endless. If you have any questions about
locations and methods contact Snap-Loc immediately at contact@snaploc.com or 1-800-798-4521.
1. Chose a location to install “Snap-Loc E-Track Singles” that is not too close to gas lines, electrical or other hazards. Not recommended for use in
submerged water or ice.
2. When using on moving objects, vehicles and trailers Dynamic G-Forces in acceleration, reduction of speed and wind resistance will increase
working load weight factors.
3. Always use 5/16” inch thick fasteners sold by Snap-Loc or call us for various applications and other fastener recommendations. Using fasteners
not supplied by Snap-Loc may void warranty and claims.
4. Routinely inspect all components for any signs of structural corrosion and replace as needed.
INSTALLATION
If product becomes damaged or structurally unsafe immediately discontinue use. For questions or return
authorizations please email contact@snaploc.com or call 1-800-798-4521.
1. Snap-Loc guarantees our products to be free from defects in material and workmanship for a period of 90 days from date you received the product.
2. No returns will be accepted without pre-approved authorization.
3. No returns will be accepted more than 30 days after authorization to return has been issued.
4. During the warranty period Snap-Loc will at its own discretion repair, replace parts or replace in whole products found to be defective in
material or workmanship. Installation labor on replacement parts excluded.
5. Pre-approved return shipping will be paid for by Snap-Loc if in the continental United States. Some restrictions apply.
6. Here are some things not covered under warranty; exceeding weight limit, misuse, accident, alteration, improper installation, over tightening,
scratching, chipping, discoloring, minor plastic cracks that dont aect usability, use in extreme freezing weather or extreme heat, water
submersion, exposure to corrosive chemicals, unauthorized repair and other similar negligence.
7. Snap-Loc will not be liable for direct or indirect consequential damages whatsoever.
8. The literature included with this product has been written for your safety. If you do not accept the terms and conditions herein do not use
this product and return it within 7 days after purchase. By keeping this product you are agreeing to our warranty terms and conditions.
9. This manual was created June 2019 please check www.snaploc.com for updates thereafter.
WARRANTY

Summary of content (4 pages)