Instructions / Assembly

ManualsBrandsSmoke Hollow ManualsGrillsVECTOR Series 3-Burner Portable Tabletop Grill Propane Gas in Red with Side Tables

Tabletop Gas Grill

VT280RDS

Tools needed for assembly:

Phillips screwdriver, Pliers or Adjust-

able Wrench

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flames.

3. Open lid.

4. If odor continues, keep away from

the appliance and immediately call

your fire department.

Failure to follow these instructions could

result in fire or explosion which could

cause property damage, personal injury

or death.

DANGER

1. Never operate this appliance unat-

tended.

2. Never operate this appliance within

10 ft (3.0 m) of any structure, com-

bustible material or other gas cylin-

der.

3. Never operate this appliance within

25 ft (7.5 m) of any flammable liquid.

4. Do not fill cooking vessel beyond

maximum fill-line.

5. Never allow oil or grease to get hot-

ter than 400°F or 200°C. If the tem-

perature exceeds 400°F (200°C) or

if oil begins to smoke, immediately

turn the burner or gas supply OFF.

6. Heated liquids remain at scalding

temperatures long after the cooking

process. Never touch cooking appli-

ance until liquids have cooled to

115°F (45°C) or less.

7. If a fire should occur, keep away

from the appliance and immediately

call your fire department. Do not at-

tempt to extinguish an oil or grease

fire with water.

Failure to follow these instructions could

result in fire or explosion which could

cause property damage, personal injury

or death.

DANGER

Conforms to ANSI Std Z21.89-2013

Outdoor cooking specialty gas appliance

Summary of content (18 pages)

PAGE 1
Tabletop Gas Grill VT280RDS Conforms to ANSI Std Z21.89-2013 Outdoor cooking specialty gas appliance DANGER Tools needed for assembly: Phillips screwdriver, Pliers or Adjustable Wrench DANGER If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flames. 3. Open lid. 4. If odor continues, keep away from the appliance and immediately call your fire department.
PAGE 2
WARNING WARNING The combustion of Propane gas can yield the formation of chemical compounds known in the state of California，U.S.A., to cause birth defects， cancer，and other serious health matters. For Outdoor Use Only (outside of any type of enclosure) WARNING If you smell gas – ● Turn off the gas supply to the appliance ● Extinguish any and all open flames ● Open the Lid of the Grill ● If the odor remains, stay away from the grill and notify your gas supplier and/or the Fire Department.
PAGE 3
Read all safeguards and assembly instructions before assembling and operating your grill. In order to properly assemble your grill, you will only need two tools: ● Phillips head screwdriver ● Pliers or adjustable wrench (tools not included) Before assembling your new grill, unpack all the parts from the box. Carefully remove all packing material and lay out all the parts for easy access and identification.
PAGE 4
SAFETY WARNINGS 1. The installation of this grill must conform to local codes, or in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1 / NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B 149.2, or The Standard for recreational Vehicles, ANSI 119.2 / NFPA, and CSA Z240 RV Series, Recreational Vehicle Code, as Acceptable. 2. The Gas Grill is for use with LP (Propane) Gas ONLY! LP Gas Cylinder is NOT included with the Grill.
PAGE 5
READ ALL SAFEGUARDS AND INSTRUCTIONS THOROUGHLY! YOUR SAFETY IS VERY IMPORTANT – FAILURE TO FOLLOW PROPER PROCEDURES AND SAFEGUARDS MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY OR DEATH. DANGER DANGER ● ● The GRILL is for outdoor use only! ● Do NOT use this grill for other than its intended purpose. ● ● ● ● ● Do not leave grill unattended when in use.
PAGE 6
VT280RDS Parts List Note: For assistance, including missing or damaged parts, call toll free - 866-475-5180 from 8:30 am - 4:30 pm Central Time, Monday - Friday 1 3 2 1 3 4 21 5 6 7 8 11 19 9 10 22 12 13 14 15 16 17 Hardware Pack Quantity Description 18 2 4 6 2 2 6 M6x12 Combo Truss Head Bolts, Black Nickel Plated M5x17 Shoulder Bolts, Black Nickel Plated M5x12 Shoulder Bolts, Black Nickel Plated M5x10 Combo Truss Head Bolts, Black Nickel Plated M5 Nuts M6x20 Combo Truss Head Bolts, Black N
PAGE 7
VT280RDS Parts List Item No.
PAGE 8
Assembly Note: Carefully cut the tape holding the carton together. Cut the carton so that it can lay flat on the ground to provide a clean surface for assembling your Grill. Remove the packing materials and all the parts from inside the Cabinet. After unpacking all the parts, check to make sure you HAVE all the parts. If anything is damaged or missing, contact our toll free number: 866-4755180. Discard all packing material in a safe and recyclable manner. Save this Assembly Manual for future reference.
PAGE 9
Assembly Step 3: Attach the Heat Indicator Step 3 Locate: Heat Indicator Procedure: Remove the nut from the Heat Indicator first, then attach the Heat Indicator to the Grill Lid using the nut as shown in Fig. 3. Fig. 3 Step 4: Attach the Lid Decorative Plate and Lid Handle Step 4 Locate: Lid Decorative Plate, Lid Handle and (2) M6x20 bolts Procedure: Attach the Lid Decorative Plate and Lid Handle to the Grill Lid using (2) M6x20 bolts as shown in Fig. 4. Fig.
PAGE 10
Assembly Step 6: Attach the Wood Chip Box Rails Step 6 Fig. 6A Locate: Wood Chip Box Left & Right Rails, (4) M5x10 bolts Procedure: Push the Wood Chip Box Left Rail into the rectangular hole in the Front Panel of the Firebox as shown in Fig. 6A. Attach the bracket of the Wood Chip Box Left Rail to the left side of front panel using (1) M5x10 bolt as shown in Fig. 6B. Attach the Wood Chip Box Left Rail to the Rear Panel of the Firebox using (1) M5x10 bolt as shown in Fig. 6C. Fig. 6B Fig. 6C Fig.
PAGE 11
Assembly Step 7: Attach the Wood Chip Box Assembly Step 7 Locate: Wood Chip Box, Wood Chip Box Front Panel Assembly, Wood Chip Box Lid, Wood Chip Box Handle, Wood Chip Box Lock, Wood Chip Box Tent, (2) M6x12 bolts, (2) M5x10 bolts and (2) M5 nuts Fig. 7A Procedure: Attach the Wood Chip Box Handle and Wood Chip Box Lock to the Front Panel Assembly using (2) M6x12 bolts as shown in Fig. 7A. Attach the Wood Chip Box to the Front Panel Assembly using (2) M5x10 bolts and (2) M5 nuts as shown in Fig. 7B.
PAGE 12
Assembly Step 8: Attach the Heat Tents Step 8 Locate: (2) Heat Tents Fig. 8A Procedure: Install (1) Heat Tent by inserting the tabs through the slots on the Rear Bracket on the Firebox as shown in Fig. 8A. Insert the other end of the Heat Tent with the slots into Front Bracket on the Firebox as shown in Fig. 8B. Push Heat Tent back into position. Fig. 8B Refer Fig. 8A to Fig. 8B, attach another Heat Tent as shown in Fig. 8C. Fig. 8C Step 9: Attach the Warming Rack Step 9 Fig.
PAGE 13
Assembly Step 10: Place the Cooking Grid Step 10 Locate: (2) Cooking Grids Procedure: Place (2) Cooking Grids into the Firebox as shown in Fig. 10. Fig. 10 Step 11: Attach the Side Shelf Brackets Step 11 Locate: (1) Side Shelf Left Bracket, (1) Side Shelf Right Bracket and (4) M6x12 bolts Procedure: Attach (1) Side Shelf Left Bracket and (1) Side Shelf Right Bracket to the right side of the Firebox using (4) M6x12 bolts as shown in Fig. 11. Fig.
PAGE 14
Step 14 Completed Grill Assembly of your grill is now complete. To order a cover for your grill, please visit: www.thesmokercompany.
PAGE 15
OPERATING INSTRUCTIONS Connecting the LP gas cylinder to the grill ● ● ● ● ● ● ● ● ● ● The LP Gas Cylinder must be a 20 pound cylinder and have a Type 1 Cylinder Valve Outlet Connector. Handle the Cylinder with care - do not drop it. When you are not using the grill, the LP Gas Cylinder should be disconnected. Connect the regulator and hand tighten firmly. Do a leak test each time you connect a LP Gas Cylinder and before lighting the grill. Never use a match or lit flame to test for leaks.
PAGE 16
OPERATING INSTRUCTIONS Adding Wood (Optional) To add wood before cooking, simply fill the wood chip box with your choice of flavoring hardwood chips. The amount and type of wood you use is entirely up to you. One full box is typically enough for 30 minutes of smoking. Once the box is filled with wood, slide the box into the grill. To add wood chips while cooking, pull out the wood chip box from the grill. Dump the wood chip ash in a metal container (Preferably with water) to extinguish the wood chip ash.
PAGE 17
OPERATING INSTRUCTIONS CARE AND CLEANING ! WARNING ! ● Do not do any cleaning or maintenance on any grill parts until all parts are cool! Be sure that the valve on the LP Gas Cylinder is closed and in the OFF position ● After every cooking session, you may run the gas grill on HIGH to burn off any food residue, keeping the residue from building up. CLEANING ● ● ● ● Use only mild dishwashing detergents, hot water, a nylon scrub pad and a BBQ wire brush cleaning tool.
PAGE 18
This Smoke Hollow ® Grill is guaranteed against broken or damaged parts at time of purchase. All parts carry a 1-year limited warranty. Paint is guaranteed to be free of defects for 90 days except for rust, which may appear after repeated use. This warranty does not cover damage or issues related to neglect, abuse, or modifications to the product. Repair labor is not covered.