Instruction manual

USE - 3791477A143/A
e
USE
Preliminary operations
• Remove any protective film from the outside
or inside of the appliance, including
accessories.
• Remove any labels (apart from the technical
data plate) from the accessories and
shelves.
• Remove and wash all the appliance
accessories (see chapter "CLEANING
AND MAINTENANCE").
First heating
1. Set a cooking time of at least one hour (see
paragraph "Using the oven").
2. Heat the empty oven compartment at the
maximum temperature to burn off any
residues left by the manufacturing process.
When heating the appliance
• air the room;
•don't stay.
Using the accessories
Racks and trays
Racks and trays have to be inserted into the side
guides until they come to a complete stop.
• The mechanical safety locks that prevent the
rack from being removed accidentally must
face downwards and towards the back of
the oven cavity.
Using the oven
Digital programmer
Decrease key
Clock key
Increase key
Display symbols
Timed cooking
Pyrolytic cycle
Cooking
Minute minder timer
Temperature probe
Door lock
Setting the time
On the first use, or after a power failure, the
digits will be flashing on the
appliance’s display.
1. Hold the clock button down for a few
seconds. The dot between the hours and the
minutes flashes.
2. The time can be set via the increase key
and decrease key . Keep the button
pressed to increase or decrease rapidly.
3. Press the clock key or wait for a few
seconds.
See General safety instructions.
Gently insert racks and trays into the
oven until they come to a stop.
Clean the trays before using them for
the first time to remove any residues left
by the manufacturing process.
See General safety instructions.
If the time is not set, the oven will not
switch on.