Dear Customer, Thank you for buying a Smeg 50’s Style Stand Mixer. By choosing one of our products, you have selected an appliance which combines iconic style with innovative technical design and attention to detail. This appliance coordinates perfectly with other Smeg products, or works equally great as a standalone statement piece in your kitchen. We hope you enjoy using your new appliance! For further information about the product please visit: www.smeg50style.com or www.smeg.
Contents 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Introduction This user manual Intended use General safety instructions Manufacturer liability Identification plate Disposal 2 Description 2.1 Product description 2.2 Description of parts 2.3 Standard accessories 3 Use 3.1 3.2 3.3 3.4 3.5 30 30 30 30 31 33 33 33 EN 1 Instructions 34 34 35 36 38 Before first use Using the stand mixer Using the pouring shield Functions Speed setting suggestions 4 Cleaning and care 4.1 Instructions 4.2 Ordinary daily cleaning 4.
Instructions 1 Instructions 1.1 Introduction Key information for the user: Instructions General information on this user manual, on safety and final disposal. Description Description of the appliance and its accessories. Use Information on the use of the appliance and its accessories, advice on preparing recipes with the appliance. Cleaning and care Information for correct cleaning and care of the appliance. Safety instructions Information Advice 30 1.
Instructions Follow all safety instructions in order to be able to use the appliance safely. • Read this user manual carefully before using the appliance. • Switch off the appliance immediately after use. • Do not leave the appliance unattended while it is operating. • Disconnect the appliance from the power socket as soon as you have finished using it and before cleaning it. • Do not immerse the appliance, the power cord or the plug in water or any other liquid.
Instructions For this appliance • Unplug the appliance from the power socket before changing the accessories or approaching moving parts. • Do not insert, remove or replace standard accessories with the safety lock disengaged (motor head lowered). • Do not touch moving parts while the appliance is operating. Keep hands, hair, clothing, spatulas and any other objects away from the mixer’s standard and optional accessories to avoid personal injury or damage to the machine.
1.5 Manufacturer liability The manufacturer shall not be held responsible for personal injuries or property damage caused by: • Any use of the appliance other than the one it was designed for • Not having read the user manual • Tampering with any part of the appliance • Use of non-original spare parts • Not following the safety instructions. 1.6 Identification plate The identification plate bears the technical data, serial number and brand name of the appliance.
Description 2 Description 2.1 Product description 1 7 3 11 6 12 3 5 4 10 4 13 2 14 9 8 Model SMF02 - SMF03 - SMF13 - Stand Mixer 1 Motor head 2 Body 3 Power and speed selector 4 Head raising/lowering release button 5 Lower attachment for standard accessories 6 Front attachment hub for optional accessories 7 Front hub cover 8 Bowl base 9 Bowl** 10 Pouring shield* 11 Dough hook 12 Flat beater 13 Wire whisk 14 Flex edge beater* *Standard only on certain models.
Description Motor head (1) Upper part of the appliance, responsible for rotating the standard and optional accessories. Power and speed selector (3) Lever for speed selection. The ‘0’ position of the lever corresponds to the OFF position (appliance off). To start the appliance, position the lever on one of the 10 available speeds (positions 1-10), depending on the type of mixing required. See ”3.5 Speed setting suggestions” for more details and suggestions.
Description 2.3 Standard accessories Aluminium dough hook For slowly combining, mixing and kneading leavened dough type mixtures including bread, pasta, pizza, etc. Aluminium flat beater Stainless-steel wire whisk For beating, mixing, whisking, whipping ingredients such as butter, eggs, cream, etc. Also ideal for preparing creams, custards, sauces, etc. Flex edge beater* For combining, mixing, and starting all mixing procedures. For preparing cake batters and pastries, biscuits, icing, etc.
Description EN Pouring shield* For protecting against splattering and to facilitate the addition of ingredients when in use. Only suitable for use with the stainless steel bowl*. The standard and optional accessories intended to come into contact with food are made of materials that comply with the provisions of current legislation. *Standard only on certain models. Also available as an optional accessory.
Use 3 Use 3.2 Using the stand mixer Danger of electrocution • Plug into an earthed three-pin socket. • Do not tamper with or remove the earth pin. • Do not use an adapter. • Do not use an extension cord. • Failure to follow these instructions could result in death, fire, or electrical shock. 1. Place the mixer on a flat, stable and dry surface. 2. Press the release button (1). 3. Hold down the button and raise the head (2), accompanying its movement with your hand. 2 3.1 Before first use 1.
4. Insert the bowl (3) in its base (4). Grasp the bowl by its handle (5) and turn the bowl (3) clockwise until it locks into place. A 6. Insert the accessory (6) in the lower attachment (7) and push it upwards. Keep pressing the accessory upwards and turn it anticlockwise until the pin (8) locks fully into place. 7 3 6 4 B 5 5. Select the accessory required based on the type of mixing to be performed.
Use 7. Add the ingredients to the bowl. 8. To close, bring the motor head down by pressing the release button (1) and then tilt the motor head (2) slightly backwards until it releases. 9. Keep the button pressed down and lower the head (2), accompanying its movement with your hand. 11. Check that the speed selector (10) is positioned on ‘0’ (OFF). 12. Insert the plug into the power socket. 13.
Use • Do not touch the accessories while the appliance is moving. • Do not operate the mixer with the accessory inserted and the bowl empty. 3. Press the release button (1) to raise the head (2). EN Moving parts Danger of personal injury and damage to the appliance 2 When you have finished using the mixer: 1. Position the speed selector (10) on ‘0’ (OFF) and remove the plug from the socket. 2. Remove the pouring shield, if it is on the bowl (9).
Use 4. Push the accessory (6) upwards slightly and turn it clockwise to unlock it from the pin (8). Extract the accessory (6) from the lower attachment (7). 5. Remove the bowl (3) from its base (4) by turning it anticlockwise to release it.
3.3 Using the pouring shield 1. Fit the pouring shield (1) to the upper lip of the stainless steel bowl* after inserting the bowl in its base and the accessory in the lower attachment and lowering the head into the operating position. 2. Fit the pouring shield with the opening (1) facing outwards in order to add ingredients to the bowl without stopping the stand mixer.
Use 3.4 Functions Planetary movement Safety lock system The planetary movement is generated by rotation (1) of the accessory around its axis in the opposite direction to the rotary movement (2) of the mixer. This movement maximises coverage of the entire bowl with consistent results for all mixtures. The appliance has a safety system which automatically shuts off the appliance when the motor head is raised.
Use EN 3.5 Speed setting suggestions The speed selector shows the most appropriate accessory to use with the selected speed. The speeds indicated in the table are approximate and can vary depending on the recipe and the interaction of the different ingredients used. Speed setting LOW 1-3 LOW 1-3 MEDIUM 4-7 HIGH 8 - 10 Function Accessory COMBINE Combining ingredients. KNEAD Kneading - preparing leavened doughs (bread, pizza, egg pasta etc.), see ”Bread/pizza dough and egg pasta dough”.
Use Table of recommended accessory, recommended speeds and maximum capacities Accessory Preparation Speed Time Min/max capacity Egg whites 8 -10 2-3 min 2 - 12 (1) Cream 8-10 2-3 min 100 ml/1000 ml Prepared cake batters 1-7 3-4 min 2 kg total batter Pastry 1-7 3-4 min 2.6 kg total batter Bread/pizza dough 1-3 4 min 1.8 kg total dough (max 1.
General advice Tips for whisking egg whites • Never exceed the maximum speed and capacity indicated in the table in order to prevent damage to the appliance. • Turn on the appliance at a low speed until all the ingredients are mixed, then increase the speed on the basis of the required operation. • When adding ingredients, always pour them onto the edge of the bowl and not directly onto the moving accessory. • Reduce the speed when you add dry or liquid ingredients to stop them splattering.
Use Recommendations for recipes using eggs Prepared cake batters • For the best results, use eggs at room temperature. • When working with stiff pasta doughs, do not exceed the quantity of 3 medium eggs, adding small quantities of water if necessary. • For up to 1 kg of batter: start up the appliance at a low speed until the ingredients start to come together, then gradually increase the speed up to 7 for the remaining time.
Cleaning and care 4.1 Instructions Improper use Danger of electrocution • Switch off and unplug the appliance before cleaning the mixer and its standard and optional accessories. Improper use Risk of damage to surfaces • Do not use steam jets to clean the appliance. • Do not use cleaning products containing chlorine, ammonia or bleach on steel parts or parts with metallic finishes (e.g. anodised, nickel- or chrome-plated). • Do not use abrasive or corrosive detergents (e.g.
Cleaning and care 4.3 What to do if... Problem Possible cause The motor has overheated. Solution Disconnect the mixer from the power and leave the motor to cool. Insert the plug into the power socket. Do not use The plug is not properly inserted in adaptors or extensions. the power socket. Check that the house main breaker is on. The motor will not start The cable is defective. Have the cable replaced at an Authorised Service Centre. Lack of power. Check that the house main breaker is on.
Cleaning and care Possible cause Solution EN Problem The mixer is not resting on a stable Place the mixer on a flat, surface. stable surface. The anti-slip rubber feet are worn. Have them replaced at an Authorised Service Centre. The mixer vibrates The speed has been set too high Set a lower speed and ensure the bowl has not or the load is excessive. been overfilled. The bowl has not been correctly Check that the bowl is correctly locked into its locked into its base. base.
Cleaning and care Problem The accessory is struggling to turn inside the bowl Possible cause The dough mixture is too thick and Add water or other liquid to is stopping the accessory from loosen the dough mixture. turning. The bowl is too full. If the problem has not been resolved or in the event of another type of fault, contact your local technical support centre. 52 Solution Remove half the bowl’s contents and work it separately.
