Instructions Manual SHW910X
INDEX EN WARNINGS - COMPONENTS .............................................................................................................................................. 3 INSTALLATION...................................................................................................................................................................... 4 USE - MAINTENANCE .......................................................................................................................................
WARNINGS - COMPONENTS WARNINGS INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. • The minimum safety distance between the cooker top and the extractor hood is 650 mm (some models can be installed at a lower height, please refer to the paragraphs on working dimensions and installation). • Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
INSTALLATION The cooker hood must be installed centrally over a cooking appliance. The minimum distance between the cooking surface and the metal grease filters on the underside of the hood must be at least 650mm. To install the hood proceed as follows: 1) Drill six 8mm diameter holes at X1-X2-J and insert the plastic rawl plugs supplied as illustrated in fig. 2 ensuring the brackets are fitted as shown in the blow up.
USE - MAINTENANCE USE The cooker hood functions are controlled by a series of slider or push button switches mounted on the front of the hood and control the worktop lighting and fan motor speeds. This cooker hood will not remove steam. 1) SLIDER SWITCHES (fig.11): - A switch controls the wotktop lighting - ON/OFF. - A switch controls the fan speeds - OFF/ON-1-2-3. - The red neon lamp illuminates when the motor is switched ON . 2) PUSH BUTTON SWITCHES (fig.
X1 = = 15 H X2 J 180 750 min 1140 max A = = B 180 590 min = = 180 275 290 600 700 900 1 X X1 H J C X2 1 2 J 1 2 3 2 C G J 4 5
6 H L H 7 M L 9 8 B 10 11 L 2 3 0 1 1 0 1 T1 T2 T3 L - 0 M MID MAX L S V1 V2 V3 0-1
436005999_ver3