Specifications Sheet

SHW910X

smeg 90cm wallmount rangehood

ID091012

Code SHW910X

EAN 9345025000705

ﬁnish stainless steel

dimensions 898mmW x 740–1140mm H x

490mmD

installation wallmount

motor 1 x 250W centrifugal

air extraction • duct direct to atmosphere — 150mm

diameter ducting required

• recirculate to kitchen — 125mm

ducting required

capacity 920m³/hr (IEC 61591: p=0)

860m³/hr (IEC 61591: p=1)

noise rating 52–71 dBA (IEC 60704-3)

illumination 2 X 20w halogen globes

speeds four, progressive button

maximum

current

0.17 amps

power supply 220–240V, 50Hz

supplied 3 x aluminium grease ﬁlters

optional charcoal ﬁlters (part #112.0157.240)

weight 14.2kg gross, 12kg net

package

dimensions

375x970x570mm

p = 0 airﬂow direct out of motor housing

p = 1 airﬂow after 1m & 90° bend + 1m

PAGE 1
SHW910X smeg 90cm wallmount rangehood EAN 9345025000705 finish stainless steel dimensions 898mmW x 740–1140mm H x 490mmD installation wallmount motor 1 x 250W centrifugal air extraction • • duct direct to atmosphere — 150mm diameter ducting required recirculate to kitchen — 125mm ducting required capacity 920m³/hr (IEC 61591: p=0) 860m³/hr (IEC 61591: p=1) noise rating 52–71 dBA (IEC 60704-3) illumination 2 X 20w halogen globes speeds four, progressive button maximum current 0.
PAGE 2
smeg 90cm wallmount rangehood 740 minimum – 1140 maximum SHW910X PLEASE NOTE: drawings are not to scale. They are to assist only. WARNING: technical specifications and product sizes can be varied by the manufacturer without notice. Cutouts for appliances should only be by physical product measurements. The above information is indicative only.