Specifications Sheet

SAI95
smeg SmartSense 90cm induction cooktop
ID051114
Code SAI95
EAN 3760120863479
finish black ceramic surface, 12mm bevelled edge
installation built-in hob, topmount
size 900mmW x 520mmD x x 41mm H + 4mmH ceramic
surface
cutout 810mmW x 490mmD
capacity five zones —
front right*: 220x180mm
2100W | boost 2600/3700W
rear right*: 220x180mm
2100W | boost 2600/3700W
rear centre: 180mm
1850W | boost 2300/3000W
front centre: 180mm
1850W | boost 2300/3000W
left: 260mm
2600W | boost 3300/5500W
*These two zones feature surface share
total power 11,100 watts
power levels • 9 heat settings per zone + 2 boost settings per
zone
• 3 auto-regulated temperatures
∫ 42ºC, ∫∫ 70ºC, ∫∫∫ 94ºC
current 46.25 amp, must be hard wired
timers • 3 timers, simultaneous or separate operation
• independent egg timer
controls ergonomic slide control
safety • pan detection
• automatic cut-off
• touch-control lock
• residual heat indicators
• automatic spillage stop
• child safety lock
pan size automatic pan size recognition
warranty two years parts and labour
FEATURES
SURFACE SHARE
The Smeg SAI95 90cm induction cooktop has five induction
cooking zones, two of which feature Smeg’s Surface Share
technology - they can be combined and operated with a single
control. Smeg’s Surface Share zones are the largest available
and rectangular in shape, ensuring that every part of the zone to
the edge is usable, without any cold spots. You can use pans of
different shapes - long, large, irregular or rectangular; and any
number of pans on the single shared surface.
PAN DETECTION
Zones which do not feature Surface Share are delineated by
a cross where the zone’s horizontal crossbar is the maximum
recommended diameter of the cooking utensil’s base and the
vertical crossbar being the minimum diameter. Only the base
area of the pan is activated by the electromagnetic field within
the cooking zone so there is no wastage of power.
SLIDE OR DIRECT CONTROL
For precise cooking control, each zone is operated by an
ergonomic slide control where you can choose to touch directly
or finger swipe up and down the 1 to 9 power levels with no
‘tapping’ required.
PRESET TEMPERATURES
There are three pre-selected options to take the guesswork out of
cooking – keep warm 42°, simmer 70° or rolling boil 94°C.
RECALL FUNCTION
After switching off the cooktop, it’s also possible to reactivate all
of the previous settings.
AUTOMATIC COOKING AND TIMERS
Each zone can be programmed for automatic cooking, where
the zone heats to full power and then automatically reduces
to the level you have selected. Stop-cook timers can also be
activated for each zone. The STOP & GO function means you
can pause the whole cooktop, and return to your previous
settings if you need to leave the cooktop unattended for any
reason.
SAFETY AND MAINTENANCE
For safety, Smeg’s SmartSense cooktops feature automatic
spillage stop, touch control locks, child safety locks and residual
heat indicators. Cooling fans ensure the temperature beneath
the carcase is tempered and protects the electronic controls. And
because boil-overs will not burn onto the surface, SmartSense
cooktops are very easy to clean simply with a damp cloth.
BOOST FUNCTION
Smeg SmartSense induction cooktops feature single boost (2,300W
and 2,600W) and double boost (3,000W and 3700W) options.
Boost provides an additional surge of power for even more intense
heat and is ideal for heating large quantities rapidly (eg water for
cooking pasta). The temperature will revert to power level 9 when
complete (boost is limited to 8–10 minutes if not stopped beforehand).