Table of contents 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 General safety instructions Manufacturer’s liability Appliance purpose Identification plate This user manual Disposal How to read the user manual To save energy Information for European Control Bodies 2 Description 2.1 2.2 2.3 2.4 2.5 General Description Cooking hob Control panel Other parts Available accessories 3 Use 3.1 3.2 3.3 3.4 3.5 3.
Instructions 1 Instructions 1.1 General safety instructions Risk of personal injury • During use the appliance and its accessible parts become very hot. Never touch the heating elements during use. • Protect your hands by wearing oven gloves when moving food inside the oven. • Never try to put out a fire or flames with water: Turn off the appliance and smother the flames with a fire blanket or other appropriate cover.
• Do not insert pointed metal objects (cutlery or utensils) into the slots in the appliance. • Do not pour water directly onto very hot trays. • Keep the oven door closed during cooking. • If you need to move food or at the end of cooking, open the door 5 cm for a few seconds, let the steam come out, then open it fully. • Do not open the storage compartment (where present) when the oven is on and still hot. • The items inside the storage compartment could be very hot after using the oven.
Instructions Risk of damaging the appliance • Do not use abrasive or corrosive detergents (e.g. scouring powders, stain removers and metallic sponges) on glass parts. • Use wooden or plastic utensils. • Racks and trays should be inserted as far as they will go into the side guides. The mechanical safety locks that prevent them from being removed must face downwards and towards the back of the oven cavity. • Do not sit on the appliance. • Do not use steam jets to clean the appliance.
• If any liquid does boil over or spill, remove the excess from the hob. • Take care not to spill acid substances such as lemon juice or vinegar on the hob. • Do not put empty pans or frying pans on switched on cooking zones. • If cracks or fissures form, or if the glass ceramic cooking surface breaks, turn off the appliance immediately. Disconnect the power supply and call Technical Support.
Instructions Installation • THIS APPLIANCE MUST NOT BE INSTALLED IN BOATS OR CARAVANS. • The appliance must not be installed on a pedestal. • Position the appliance into the cabinet cut-out with the help of a second person. • To avoid potential overheating, the appliance must not be installed behind a decorative door or a panel. • Have the electrical connection performed by authorised technical personnel. • The appliance must be connected to earth in compliance with electrical system safety standards.
1.2 Manufacturer’s liability The manufacturer declines all liability for damage to persons or property caused by: • Use of the appliance other than that specified • Failure to comply with the instructions in the user manual • Tampering with any part of the appliance • The use of non-original spare parts. 1.3 Appliance purpose • This appliance is intended for cooking food in the home environment. Every other use is considered improper.
Instructions • Deliver the appliance to the appropriate recycling centre for electrical and electronic equipment waste, or return it to the retailer when purchasing an equivalent product, on a one for one basis. Our appliances are packaged in non-polluting and recyclable materials. • Deliver the packing materials to the appropriate recycling centre. Plastic packaging Danger of suffocation • Do not leave the packaging or any part of it unattended. • Do not let children play with the plastic bags. 1.
Instructions 1.9 Information for European Control Bodies Fan forced mode the ECO function used to define the energy efficiency class complies with the specifications of European standard EN 60350-1. Energy efficiency technical data Information in accordance with the European energy labelling and ecodesign regulations is contained in a separate document accompanying the product instructions.
Description 2 Description 2.
Description EN 2.2 Cooking hob Zone Outside diameter (mm) Max. power draw (W)* 1 2 3 4 5 210 180 270 180 210 2300 1300 2300 1300 2300 Power draw in booster function (W) * 3000 1400 3000 1400 3000 * Power levels are approximate and can vary according to the pan used or the settings made. Advantages of induction cooking The hob is equipped with an induction generator for each cooking zone.
Description 2.3 Control panel 1 Programmer clock 5 Hob cooking zone knobs For displaying the current time, setting programmed cooking operations and the minute minder timer. Useful for controlling the cooking zones of the induction hob. Turn the knobs clockwise to adjust the operating power of the hot plate from a minimum of 1 to a maximum of 9. The working power is indicated on the display on the hob. 2 Temperature knob This knob allows you to select the cooking temperature.
Description Cooling fan Rack EN The fan cools the ovens and comes into operation during cooking. The fan causes a steady outflow of air that exits from the rear of the appliance and which may continue for a brief period of time even after the appliance has been turned off. Used for supporting containers with food during cooking. Tray rack Do not obstruct ventilation openings and heat dispersal slots. 2.
Use 3 Use Instructions High temperature inside the oven during use Danger of burns • Keep the oven door closed during cooking. • Protect your hands by wearing oven gloves when moving food inside the oven. • Do not touch the heating elements inside the appliance. • Do not pour water directly on very hot trays. • Keep children under the age of 8 away from the appliance when it is in use.
Use • Do not spray any spray product near the appliance. • Do not use or leave flammable materials near the oven or the storage compartment. • Do not use plastic cookware or containers for cooking. • Do not place sealed tins or containers in the oven cavity. • Do not leave the appliance unattended during cooking operations where fats or oils could be released. • Remove all trays and racks which are not required during cooking. First use 1.
Use 3.2 Using the hob On first connection to the electrical mains, an automatic check will be carried out that will switch on all indicator lights for a few seconds. After use, turn off the hot plates used by returning the appropriate knob to the O position. Never rely solely on the cookware detector. To see whether the pan is suitable, bring a magnet close to the bottom: if it is attracted, the pan is suitable for induction cooking.
Cookware recognition Limiting the cooking duration When there is no saucepan on a cooking zone or if the saucepan is too small, no energy will be transmitted and the symbol will appear on the display. If there is a suitable saucepan on the cooking zone, the recognition system notices it and turns on the hob to the power level set using the knob. Energy transmission is also interrupted when the saucepan is removed from the cooking zone (the symbol will be shown on the display).
Use Advice on energy-saving Power levels • The diameter of the base of the pan must correspond to the diameter of the cooking zone. The power in the cooking zone can be adjusted to various levels. The table shows the levels suitable for various types of cooking. Power level 0 • When buying a pan, check whether the diameter indicated is that of the base or the top of the pan, as the top is almost always larger than the base.
Use Each cooking zone is equipped with a heating accelerator that allows the maximum power to be delivered for a time that is proportional to the selected power. This function allows the selected power to be achieved in the shortest amount of time. 1. Turn the knob anti-clockwise to position A and then release it. The display shows the symbol . 2. Select the required heating power (1 - 8) within 3 seconds. The selected power and symbol will flash alternately on the display.
Use The module tries to maintain the maximum deliverable power levels. Levels set by the automatic control will appear on the display. The flashing of a power level indicates that it will be automatically limited to a new level selected by the power control module. Hob power limitation The induction hob is configured to operate at 7.4 kW, but it can be set to operate at 4.8 kW or 3.7 kW. 1. Disconnect the appliance from the mains power supply and wait 10 seconds before turning the power back on.
Use After having released the knobs at the required power level, wait until the displays turn off. The power level can be changed again up to 4 minutes after the displays have turned off (without having to disconnect the appliance from the power supply). The last power setting will remain selected even in the event of a power failure. Control lock The controls lock is a device that protects the appliance from accidental or inappropriate use. EN 4. Turn and hold both knobs anti-clockwise again.
Use 3.3 Using the storage compartment The storage compartment is at the bottom of the cooker. To open it, pull the handle towards you. It can be used to store cookware or metallic objects necessary when using the appliance. 3.4 Using the oven Switching on the oven To switch on the oven: 1. Select the cooking function using the function knob. 2. Select the temperature using the temperature knob.
Grill The heat coming from the grill element gives perfect grilling results above all for thin and medium thickness meat and, in combination with the rotisserie (where fitted), gives the food an even browning at the end of cooking. Perfect for sausages, spare ribs and bacon. This function enables large quantities of food, particularly meat, to be grilled evenly. Fan with grill The air produced by the fan softens the strong heatwave generated by the grill, grilling perfectly even very thick foods.
Use The ECO function is a delicate cooking function and is recommended for food withstanding temperatures lower than 210 °C; in case of cooking at higher temperatures, select another function. Vapour Clean This function makes cleaning easier using the steam produced by a small quantity of water poured onto the appropriate groove placed on the bottom. 3.5 Cooking advice General advice • Use a fan assisted function to achieve consistent cooking at several levels.
Use • Place frozen foods without their packaging in a lidless container on the first shelf of the oven. • Avoid overlapping the food. • To defrost meat, use the rack placed on the second level and a tray on the first level. In this way, the liquid from the defrosting food drains away from the food. • The most delicate parts can be covered with aluminium foil. • For successful proving, a container of water should be placed in the bottom of the oven.
Use Timed cooking Setting the time If the time is not set, the oven will not switch on. On the first use, or after a power failure, the digits will be flashing on the appliance’s display. 1. Hold down the clock key for two seconds. The dot between the hours and the minutes flashes. 2. The time can be set via the value increase key and value decrease key . Keep the key pressed in to increase or decrease rapidly. 3. Wait 7 seconds. The dot between the hours and the minutes stops flashing. 4.
Use to reset the It is not possible to set a cooking time of more than 10 hours. To cancel the set programming press and hold down the value increase and the value decrease keys at the same time and then turn the oven off manually. 5. Press the menu key . The text will appear on the display in sequence with the pre-set cooking duration added to the current time (for example, the cooking end time shown is 18:30). 6. Press the or key to set the cooking end time. (for example, 19:30).
Use 10. Return the function and temperature knobs to 0. 11. To turn off the buzzer just press any key of the programmer clock. 12. Press the and keys at the same time to reset the set program. It is not possible to set a cooking time of more than 10 hours. It is not possible to set a programmed cooking time of more than 24 hours. After setting, hold the menu key down for 2 seconds to display the cooking time remaining. Press the menu key again.
Use Modifying the set data . 2. Use the value increase and value EN 1. Press the clock key decrease keys to set the number of minutes required. Deleting the set data 1. Press the clock key . 2. Hold down the value increase and value decrease keys at the same time. 3. Then switch off the oven manually if cooking is in progress. Selecting the buzzer The buzzer can have 3 tones. 1. Hold down the value increase value decrease time. 2. Press the clock key and keys at the same . 3.
Use Cooking information table Food Weight (kg) Function Runner position from the bottom Temperature (°C) Time (minutes) Lasagne Pasta bake 3-4 3-4 Static Static 1 1 220 - 230 220 - 230 45 - 50 45 - 50 Roasted veal Pork loin Sausages Roast beef Roast rabbit Turkey breast Roast pork neck Roast chicken 2 2 1.5 1 1.5 3 2-3 1.
4 Cleaning and maintenance Cleaning the surfaces Instructions To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Improper use Risk of damage to surfaces • Do not use steam jets to clean the appliance. • Do not use cleaning products containing chlorine, ammonia or bleach on parts made of steel or that have metallic surface finishes (e.g. anodizing, nickelor chromium-plating). • Do not use abrasive or corrosive detergents (e.g.
Cleaning and maintenance 4.1 Cleaning the hob Weekly cleaning Cleaning the glass ceramic hob Clean and maintain the hob once a week using an ordinary glass ceramic cleaning product. Always follow the manufacturer’s instructions. The silicon in these products creates a protective, water-repellent membrane which also resists dirt. All marks stay on the membrane and can therefore be removed easily. After cleaning, dry the surface with a clean cloth.
4.2 Cleaning the door Removing the door For easier cleaning, the door can be removed and placed on a towel. To remove the door proceed as follows: 1. Open the door completely and insert two pins into the holes on the hinges indicated in the figure. 3. To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved sections A are resting completely in the slots. Lower the door and once it is in position, remove the pins from the holes in the hinges.
Cleaning and maintenance Removing the internal glass panes For easier cleaning, the internal glass panes of the door can be removed. 1. Open the door. 2. Position the locking hooks in the hinge holes to prevent accidental closing of the door. 3. Remove the internal glazing pane by pulling the rear part gently upwards, following the movement indicated by the arrows (1). 5. Remove the intermediate glass pane by lifting it upwards. 6. Clean the external glass pane and the previously removed panes.
4.3 Cleaning the oven cavity Removing racks/trays support frames For the best oven cavity upkeep, clean it regularly after having allowed it to cool. Avoid letting food residue dry inside the oven cavity, as this could damage the enamel. Before cleaning, take away all removable items. For easier cleaning, it is recommended to remove: • the door • the rack/tray support frames • The seal. Removing the rack/tray support frames enables the sides to be cleaned more easily.
Cleaning and maintenance 4.4 Vapor Clean Vapor Clean is an assisted cleaning procedure which facilitates the removal of dirt. Thanks to this process, it is possible to clean the inside of the oven very easily. The dirt residues are softened by the heat and water vapour for easier removal afterwards. • Pour approximately 40 cc of water into the tray. Make sure it does not overflow out of the cavity.
Vapor Clean cycle setting End of the Vapor Clean cycle 1. Turn the function knob to the symbol and the temperature knob to the 4. Open the door and wipe away the less stubborn dirt with a microfibre cloth. 5. Use a non-scratch sponge with brass filaments on hard to remove deposits. 6. In case of grease residues use specific oven cleaning products. 7. Remove the water left inside the oven.
Cleaning and maintenance 4.5 Extraordinary maintenance 4. Slide out and remove the light bulb. Replacing the internal light bulb Live parts Danger of electrocution • Unplug the appliance from the mains. The oven is fitted with a 40W light bulb. 1. Completely remove all accessories from inside the oven. 2. Remove the rack/tray support frames. 3. Remove the bulb cover using a tool (e.g. a screwdriver). Do not touch the halogen light bulb directly with your fingers, use an insulating material. 5.
Cleaning and maintenance Installing and removing the seal EN To remove the seal: • Unhook the clips located in the 4 corners and in the centre, then pull the seal outwards. To refit the seal: • Hook the clips located in the 4 corners and in the centre onto the seal. Seal maintenance tips The seal should be soft and elastic. • To keep the seal clean, use a nonabrasive sponge and wash with lukewarm water.
Installation 5 Installation 5.1 Positioning Heavy appliance Crushing hazard • Position the appliance into the cabinet cut-out with the help of a second person. Pressure on the open door Risk of damage to the appliance Any wall units positioned above the worktop of the appliance must be at a minimum distance of at least Y mm. If a hood is installed above the hob, refer to the hood instruction manual to ensure the correct clearance is left.
Installation EN Appliance overall dimensions B - Class 2 subclass 1 (Built-in appliance) A 900 mm B 600 mm C1 D min. 150 mm 900 - 915 mm H 750 mm I 450 mm L2 900 mm 1 Minimum distance from side walls or other flammable material. 2 Minimum cabinet width (=A). C - Class 2 subclass 1 (Built-in appliance) The appliance must be installed by a qualified technician and according to the regulations in force.
Installation Dimensions of the appliance: locations of gas and electric connections (mm) Positioning and levelling Heavy appliance Risk of damage to the appliance • Insert the front feet first and then the rear ones. • After making the gas and electrical connections, screw on the four feet supplied with the appliance. A 124 B 38 F min 105 - max 160 H 776 L 898 E = Electrical connection 92 The appliance must sit level on the floor to ensure stability.
Installation Fastening to the wall 3. Assemble the fastening bracket. EN The anti-tip devices must be installed in order to prevent the appliance from tipping over. 1. Screw the wall fastening plate to the rear of the appliance. 4. Align the base of the hook on the fastening bracket with the base of the slot on the wall fastening plate. 2. Adjust the height of the 4 feet.
Installation 5. Align the base of the fastening bracket with the ground and tighten the screws to fix the measurements. 6. Use 50 mm for the distance from the side of the appliance to the bracket holes. 94 7. Move the bracket onto the wall and mark the position of the holes to be drilled in the wall. 8. After drilling the holes in the wall, use wall plugs and screws to fasten the bracket to the wall. 9.
Installation Power voltage Danger of electrocution • Have the electrical connection performed by authorised technicians. • Use personal protective equipment. • The appliance must be connected to ground in compliance with electrical system safety standards. • Disconnect the mains power supply. • Use cables withstanding a temperature of at least 90°C. • The tightening torque of the screws of the terminal board leads must be 1.5 - 2 Nm. The appliance can work in the following modes: • 220-240 V 2~ EN 5.
Installation The aforementioned power cables are sized taking into account the coincidence factor (in compliance with standard EN 60335-2-6). Metal cable clamp If you use a 3 x 10 mm² cable, you should replace the plastic cable clamp with the metal cable clamp provided. Access to the terminal board To connect the power supply cable, access to the terminal board on the rear cover: 1. Remove the screws securing the lid to the rear cover. 2. Slightly turn the lid and remove it from its housing.
Installation EN Loosen the cable fastener screw before installing the power supply cable. 4. At the end, reposition the lid on the rear cover and secure it with the previously removed screws. 5.3 Instructions for the installer • Do not bend or trap the power cable. • The appliance must be installed according to the installation diagrams. • If the appliance does not work correctly after having carried out all the checks, contact your local Authorised Service Centre.