Datasheet

Resin Attachment
Cyclone Pad
Mark-free Pad Series
Minimises the transfer of rubber constituents to the workpiece.
Mark-free NBR Pad
Stuck Fluororesin Pad
1
3
2
4
5 µm
5 µm
5 µm
5 µm
Made to Order
The above adsorption marks show sample data. Actual results will depend on the conditions.
5 m
Related Pad
Pad
Si board
Adsorption mark
Analysis equipment:
Scanning probe microscope
Measurement conditions:
Measurement mode
Atomic force microscope DFM mode
Sample conditions:
Press the vacuum pad to the Si board
for 1 hour.
Monitoring location:
Monitored at a randomly selected
location where adsorption marks were
likely due to contact between the
vacuum pad and Si board.
Standard silicone rubber
Enlarged
view
PEEK material is used for the pad adsorption surface.
Prevents the transfer of rubber constituents.
Pad diameter: ø6 to ø32
No adsorption mark is left because
the vacuum pad does not come into
Minimises the transfer of rubber constituents which is
supposed to be the cause of adsorption.
Pad diameter: ø4 to ø125
Fluororesin sheet is baked into the pad adsorption
surface. Prevents the transfer of rubber constituents.
Pad diameter: ø40 to ø125
Attachment
Heavy-duty type
25