Datasheet

ManualsBrandsSMC ManualsAutomationModular Lubricator, 55 cm³, G1/4, 30 L/min

Filter Regulator Series AW10-A to AW40-A



ALAW



ALAF



ARAF



AFM



ARAW



AFM

AF Attachment

AFM / AFD

ARALAW

AW20-AAW10-A AW40-A

Standard Speciﬁ cations

Note 1) Drain guide is NPT1/8 (applicable to the

AW20-A) and NPT1/4 (applicable to the

AW30-A to AW40-A). The auto drain port

comes with ø3/8" One-touch ﬁ tting (applicable

to the AW30-A to AW40-A).

Note 2) Drain guide is G1/8 (applicable to the

AW20-A) and G1/4 (applicable to the

AW30-A to AW40-A).

Note 3) Option B, G, H, M are not assembled and

supplied loose at the time of shipment.

Note 4) Assembly of a bracket and set nuts

Note 5) When pressure is not applied, condensate

which does not start the auto drain

mechanism will be left in the bowl. Releasing

the residual condensate before ending

operations for the day is recommended.

Note 6) If the compressor is small (0.75 kW,

discharge ﬂ ow is less than

100 L/min[ANR]), air leakage from the drain

cock may occur during start of operations.

N.C. type is recommended.

Note 7) When the pressure gauge is attached, a 1.0

MPa pressure gauge will be ﬁ tted for standard

(0.7 MPa) type. 0.4 MPa pressure gauge for

0.2 MPa type (1.0 MPa pressure gauge only

for the AW10-A).

Note 8) Pressure can be set higher than the

speciﬁ cation pressure in some cases, but use

pressure within the speciﬁ cation range.

Note 9) Refer to Chemical data on page 76 for

chemical resistance of the bowl.

Note 10) A bowl guard is provided as standard

equipment (polycarbonate).

Note 11) A bowl guard is provided as standard

equipment (nylon).

Note 12) The combination of ﬂ oat type auto drain: C

and D is not available.

Note 13) Without a valve function

Note 14) The combination of metal bowl: 2 and 8 is not

available.

Note 15) For pipe thread type: NPT.

Cann

ot be used with M: Round pressure

gauge (with colour zone). Available by

request for special.

Note 16) : For pipe thread type: M5, NPT only

Symbol

Description

Body size

10 20 30 40

Semi-standard

Drain port

Note 12)

—

With drain cock



Note 13)

Drain guide 1/8 —



——

Drain guide 1/4 — —



Note 14)

Drain cock with barb ﬁ tting (for ø6 x ø4 nylon tube) — —



Exhaust

mechanism

—

Relieving type



Non-relieving type



h Flow direction

—

Flow direction: Left to right



Flow direction: Right to left



i Pressure unit

—

Name plate, caution plate for bowl, and pressure gauge in imperial units: MPa



Note 15)

Name plate, caution plate for bowl, and pressure gauge in imperial units: psi, °F



Note 16)



Note 16)



Note 16)



Note 16)

Model

AW10-A AW20-A AW30-A AW40-A AW40-06-A

Port size M5 x 0.8 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2 3/4

Pressure gauge port size 1/16

Note)

1/8

Fluid Air

Ambient and ﬂ uid temperature −5 to 60°C (with no freezing)

Proof pressure 1.5 MPa

Maximum operating pressure 1.0 MPa

Set pressure range 0.05 to 0.7 MPa

Nominal ﬁ ltration rating 5 μm

Drain capacity (cm

) 2.5 8 25 45

Bowl material Polycarbonate

Bowl guard —

Semi-standard (Steel)

Standard (Polycarbonate)

Construction Relieving type

Weight [kg] 0.09 0.21 0.41 0.75 0.81

Note) Use a bushing (part no: 131368) when connecting the R1/8 pressure gauge to the Rc1/16.