Datasheet

5
168
■
EX250-SPR1
PROFIBUS DP
9.6 kbps; 19.2 kbps; 45 kbps, 93.75 kbps; 187.5 kbps;
500 kbps; 1.5 Mbps; 3 Mbps; 6 Mbps; 12 Mbps
IP67
UL, CE
EX250-SPR1
EX250-EA1
EX250-EA2
WX-A5S
EX500-AP010-S
EX500-AP050-S
WX-B5PY-B5P-B5S
WX-B5PT-B5P-B5S
WX-B5P-5-B5S
WX-B5PR-P
EX250-IE1 EX250-IE2 EX250-IE3
M12 M12 M8
EX250-IE1
EX250-IE2
EX250-IE3
EX250-IE1-X103
EX250-IE2-X103
EX250-IE3-X103
EX9-FU05
WX-83P
PCA-1557743
Subject to change
FIELDBUS
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]
EX250 – serial interface unit (PROFIBUS DP)
Type
Fieldbus protocol
Communication
speed
Supply voltage
24 VDC ±20% (input and control)
24 VDC +10% to –5% (valve)
alarm for low voltage is given at approx. 19 VDC
Power consumption
(SI unit)
100 mA or less
Number of I/O 32 inputs and 32 outputs (24 outputs to VQC)
Enclosure
Standards
■ Up to 32 inputs per node M8 or M12 ■ For valve series VQC, SV and SY
■ Up to 32 outputs to valves per node (24 outputs to VQC)
Serial interface unit – for PROFIBUS DP
Part number Description
PROFIBUS DP node
End plate, input side (standard)
End plate, input side
(DIN rail mounting)
Connector – for PROFIBUS DP
Part number Description
Power supply, connector only
Power supply, 1 m cable
Power supply, 5 m cable
Y-connector (for cable
with molded plug)
T-connector (drop cable)
Cable 0.5 m (between node and T-connector)
Terminating resistor M12
Input modules
– mounted using supplied tie rods
Type
Number of inputs 2 channels 4 channels 4 channels
Input connector type
Transistor input PNP or NPN (selectable via switch)
Power supply
24 VDC (1 V voltage drop
for power supply)
Sensor type 2- or 3-wire sensors
Power supply to
sensors
120 mA per input module
Input modules
Part number Description
Input module, 2 inputs (2 × M12)
Input module, 4 inputs (2 × M12)
Input module, 4 inputs (4 × M8)
Input module, 2 inputs (2 × M12),
polarityswitch
1
Input module, 4 inputs (2 × M12),
polarityswitch
1
Input module, 4 inputs (4 × M8),
polarityswitch
1
1. Polarityswitch with protection element
SMC’s EX250 series is designed to connect the valve
series VQC, SV and SY (see chapter 4) and input mod-
ules for different eldbus protocols.
All input and output signals are combined in a com-
pact manifold that conforms to IP67. Up to 32 input
channels and 32 outputs can be connected in a single
manifold.
All connections (air, power supplies, eldbus and
sensor) are located on the same side of the manifold
which allows mounting in tight spaces.
All status indicators clearly visualized by LEDs on the
front of the manifold.
GSD-les and installation manuals are available on
SMC’s website www.smc.eu.
For eldbus connectors and cabling,
see end of this chapter.
Fuse
– for input modules
Part number Description
0.5 A fuse for EX250-IE1, -2 & -3
Connectors – for input modules
Part number Description
M8 (connector), screw connection to EX250-IE3
M12 (connector), screw connection to EX250-IE1 & -2
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]