Datasheet
4
54
SY3000
SY7000SY5000SY3000
PLUG-IN
SJ1000/2000
SX5000 SX3000
SX7000
VQZ2000VQZ1000
VQZ3000
SV4000
SV2000 SV1000
SV3000
VQ7-8 VQ7-6
VFR6000
VFR5000
VFR3000 VFR2000
VFR4000
VP4070
VP4050
VZS3000 VZS2000
VQZ2000
VQZ1000
VQZ3000
VS410
VQ7-8 VQ7-6
VFS6000
VFS5000
VFS4000 VFS1000
VFS3000VFS2000
VQD1000
VK3000
SYJ7000 SYJ5000
SYJ3000
VF5000 VF3000
VF1000
VQ5000
VQC4000 VQC2000
VQC1000
VQ5000
VQC4000 VQC2000
VQC1000
Ø6 Ø10 Ø16 Ø20 Ø25 Ø32 Ø40 Ø50 Ø63 Ø80 Ø100 Ø125 Ø140 Ø160 Ø180 Ø200 Ø250 Ø300
VQD
1
0.07 2 M5 4
VK
1
0.12 4 M5, 1/8 4, 6
SJ 0.08–0.12 0.6 M3, M5 2, 4, 6
SYJ 0.12–0.74 0.35 (0.1)
2
M3, M5, 1/8, 1/4 4, 6, 8
SX 0.18–0.82 0.6 M5, 1/8, 1/4, 3/8 4, 6, 8, 10
VQZ 0.32–1.2 0.4 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
SV 0.28–1.6 0.6 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VQ/
VQC
0.2–4.7 0.4 M5 3.2, 4, 6, 8, 10, 12
SY 0.26–2.5 0.35 (0.1)
2
M5, 1/8, 1/4, 3/8, 1/2 4, 6, 8, 10, 12
VF 0.13–3 1.8 M5, 1/8, 1/4, 3/8, 1/2 —
VQ7 1.4–3.3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10
VFR 0.7–10.6 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
VP4 5.6–16.7 12 3/8, 1/2, 3/4, 1, 1 1/4, 1 1/2 —
VZS 0.33–0.53 1.8 1/8, 1/4 4, 6, 8
VQZ 0.17–0.74 1 M5, 1/8, 1/4, 3/8 3.2, 4, 6, 8, 10
VS4 1 5.5 1/8, 1/4, 3/8 —
VQ/
VQC
0.18–3.4 1 M5, 1/4, 3/8 3.2, 4, 6, 8, 10, 12
VQ7 1.1–3 1 1/4, 3/8, 1/2, 3/4 6, 8, 10, 12
VFS 0.4–9 1.8 1/8, 1/4, 3/8, 1/2, 3/4, 1 —
Subject to change
SOLENOID VALVES, MECHANICAL AND MANUAL VALVES
SY9000 (see example 1)
Ideal size for actuator control
Seal type,
main valve
Valve
series
Flow
characteristics
A, BE
(2 position/
mono stable)
Applicable cylinder
Speed: 500 mm/s or lower
Power
consumption (W)
Connection size
Threaded connection (G)
Push-in tting (Ø)
Applicable
tubing size (mm) Cv value
3
Rubber sealMetal seal
1. Only available with single coil. 2. Number in parentheses stands for power saving circuit. 3. Multiply by 980 to get a Q
n
value in l
n
/min.
Directional control valves – solenoid valves
Seal type
Rubber seal: Resistant to dust when the seals between
the spool and sleeve are made of rubber.
Metal seal: Long life thanks to the air bearing be-
tween metal spool and steel sleeve.
Conditions
■ Pressure: 0.5 MPa
■ Tubing length: 1 m
■ Load: 50%
■ Stroke: 200 mm
■ Speed: 500 mm/s or lower
Cylinder size and speed
Example 1: When using the valve series SY9000
(2500 l
n
/min) for driving Ø40 to Ø100 cylinders, they will
have an average speed under the following conditions.