Datasheet

7
338
■
LC6D-220AD LC6D-507AD
24 VDC ±10%, 3 A 24 VDC ±10%, 2.5 A
LXSH2S LXPB2S LXFH5S LXSH5S LXPB5S
LC6D-220AD-P1-X316
LC6D-507AD-P1-X316
LC6D-220AD-Q
LC6D-507AD-Q
ON OFF
1
2
Subject to change
ELECTRIC ACTUATORS
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]
LC6 – drive unit
for LX unit with stepper motor
Model
Power supply
Step angle
1
Whole step (1.8);
half step (0.9)
Whole step (0.72);
half step (0.36)
Motor current 2.0/phase 0.75/phase
Input signal Pulse input (input impedance 330)
Max. input frequency 10 kHz at whole step; 20 kHz at half step
Function
2
Power supply
Connection method Connector
Ambient temperature 5 to 40 °C
Ambient humidity 35–85% (free of humidity)
Corresponding cylinder
1. Setting is done by changing the switch. The product is set as follows when shipped from factory.
2. Function: automatic power save - reduces power output by 50%, at stop mode;
input power down - power to the motor is shut down by this input and the motor is switched to non-energized mode.
Drive unit LC6D
Part number Inputs Stepper motor Motor effect
1 pulse input for speed and
1 digital input for direction
2-phase 2.0 A/phase
5-phase 0.75 A/phase
1 pulse input for clockwise and 1 pulse
input for counterclockwise direction
2-phase 2.0 A/phase
5-phase 0.75 A/phase
Half step Whole step
Disconnected Connected
Delivery setting
1. ON: Half step (gives full torque)
2. OFF: Function for power saving (50%) is connected
Switch
= DELIVERY EX-STOCK FOR MORE INFO, ASK THE SMC EXPERTS: PHONE [phone] / [e-mail]
OFF
ON
1 2