Installation Manual

GCT LTE Module Software Development Guide
Version V2.2
Aquila Confidential
Page16of27
7
AT Commands Description
PROPRIETARY AT COMMANDS
7.1 System at commands
7.1.1
AT%GIMEISV
Descriptions:
Set command changes the value of IMEI or SVN.
Read command returns the current IMEISV.
Parameter definition:
<item> String,
- “IMEI” : Set IMEI , this case is same at%gimei=”value”.
- “SVN_VAL” : Set Software Version Number S
<value> String,
- In case of “IMEI”: The International Mobile station Equipment Identity(14 digit) and the
check digit (1 digit, total 15 digits).
- In case of “SVN_VAL”: Software Version Number. (2 digits)
< IMEISV value >
String, The International Mobile station Equipment Identity (14 digits) and Software Version
Number (2 digits)
Example:
AT%GIMEISV?
%GIMEISV: 3564320588115700
OK
AT%GIMEISV=”IMEI”,”353376050126587”
OK