Operation Manual

23
TIME ZONE
The drop-down list shows the world time zone. Select the time zone that
will work the best for you. If your date/time is during the daylight saving
time period, please check the Daylight Saving box to adjust the system
time properly.
DAYLIGHT SAVING
Activate/Deactivate the daylight saving function.
DEVICE SECURITY CODE
The Device Security Code is a specific security code to access the camera.
The default password of the camera is 123456. Please use this function to
change the default password into your personal security code.
1. Type in the old password.
2. Type in the new password and confirm the new password again.
3. Tap OK to save the setting.
Note:
1. Change password in system information page accordingly.
2. If you forget the Device Security Code, please hold down the reset button (P.8)
for 5seconds to reset the system to factory default. All settings will be restored to
factory default. You will need to configure your camera from the start.
VIDEO SETTINGS
This section allows you to configure the video quality and environment
mode.
Video Quality
The Video Quality setting section allows you to adjust the quality of the
video streaming. By selecting better video image will allow you to view
high resolution image. By selecting better streaming will allow the video to
display more smoothly (quality depend on local internet environment).
Only select better image when you have sufficient bandwidth and updated
mobile device(s). Please refer to P.4 for system requirment.