Use and Care Guide

PLEASE CALL 1-888-755-4497 BEFORE RETURNING TO THE STORE.
WWW.SMART-POND.COM
11. Connect the UV clarifier plug into a properly grounded
electrical outlet. Fig. 29
Fig. 29
12. Wait several seconds for the light to turn on then check the
indicator window to verify if the light is functioning correctly.
Fig. 30
NOTE: This clarifier has a safety feature that only allows the
UV light to turn on if the lamp holder is fully seated
into the cover.
Fig. 30
TROUBLESHOOTING – UV Clarifier
If the light fails to operate:
• Check to make sure the power cord is plugged in and the light is getting power.
• Check to make sure that the lamp holder is screwed completely into the cover. (This product is
designed to prohibit operation unless it is fully assembled with the lamp holder screwed completely into
the cover.)
• Check bulb to make sure that it has not burned out. Replace the bulb as necessary, or after every
season. Bulbs are available by calling the customer service department or go to Lowe’s and purchase
smartpond model #PCRB.
GFCI
Indicator
window