FilterLinc Plug-In Electrical Noise Filter Model : 1626 (5 Amp) 1626-10 (10 Amp)
FilterLinc Owner’s Manual TABLE OF CONTENTS ABOUT FILTERLINC ................................................................................................................................... 3 Key FilterLinc Features .............................................................................................................................. 3 What is Included with FilterLinc .................................................................................................................
FilterLinc Owner’s Manual ABOUT FILTERLINC FilterLinc is designed to: • Prevent noisy electrical devices from polluting onto the power lines • Prevent INSTEON or X10 signals from being absorbed into appliances Unfiltered pass-through outlet Filtered outlet Key FilterLinc Features • 2-stage modified pie filter centered at 120 kHz • 49.
FilterLinc Owner’s Manual About Electrical Noise and Signal Attenuation Many electrical devices in your home may cause interference with your INSTEON or other power linebased automation devices. Such devices will cause either: • Electrical Noise – noise on your home’s electrical wires • Signal Attenuation – absorption of INSTEON power line communicating signals Electrical Noise Some devices may only emit electrical noise when operating so they can be difficult to detect.
FilterLinc Owner’s Manual INSTALLATION Preparing to Install FilterLinc CAUTION Read and understand these instructions before installing and retain them for future reference. FilterLinc is intended for installation in accordance with the National Electric Code and local regulations in the United States or the Canadian Electrical Code and local regulations in Canada. Use indoors only. FilterLinc is not designed nor approved for use on power lines other than 120V 60Hz, single phase.
FilterLinc Owner’s Manual SPECIFICATIONS, CERTIFICATION, AND WARRANTY Specifications View specifications for FilterLinc at: www.smarthome.com/1626.html Certification This product has been thoroughly tested by ITS ETL SEMKO, a nationally recognized independent third-party testing laboratory. The North American ETL Listed mark signifies that the device has been tested to and has met the requirements of a widely recognized consensus of U.S.
