626 (Jun04_web).
1626 (Jun04_web).qxd 6/24/2004 1:53 PM Page 2 Congratulations and Introduction Thank you for purchasing the FilterLinc Plug-In Noise Filter. The FilterLinc is designed to: 1. Prevent noisy electrical devices from polluting onto the power lines. 2. Prevent PLC/X10 signals from being absorbed into appliances. Electrical noise on the powerline generally includes spikes, clutter, waveform disturbances, and sags. Sometimes the noise will not affect the home automation system.
1626 (Jun04_web).qxd 6/24/2004 1:53 PM Page 3 The best way to determine the offending device is to isolate the circuits one at a time. Start by turning off all the circuit breakers except one circuit for testing. Attach a transmitter and an appliance module (both known good units). Attach a radio to the appliance module and turn it up. If you are sending signals from one room to another on the same circuit, you will be able to hear the radio turn on and off.
1626 (Jun04_web).qxd 6/24/2004 1:53 PM Page 4 About FilterLinc’s Certification FilterLinc has been thoroughly tested by ITS ETL SEMKO, a nationally recognized independent third-party testing laboratory. Products bearing North American ETL Listed mark signifies that the product has been tested to and has met the requirements of a widely recognized consensus of U.S.
