Use and Care Guide
5/15/2020 PDMS - Smartcore Maintenance 022019
https://pdmsview.shawinc.com/viewer/doc/4498 2/2
PREVENTATIVE MAINTENANCE
Always protect floors when moving heavy objects to prevent permanent scratches and tears.
Do not use tape to secure floor protection during construction or renovation.Use ram board or similar to protect the
floor.
Use appropriate wide floor protectors under tables, chairs, and any other heavy home furnishing to avoid permanent
damage.
Walk-off mats should be used at all entrances to absorb soil and moisture. If mats are placed directly on top of the resilient
floors, use mats without latex or rubber backings to avoid possible discoloration.
Use appropriate window coverings to avoid direct sunlight as this can fade the color of the flooring.
ROUTINE MAINTENANCE
Daily removal of dirt and dust is important to prevent particles from abrading the surface of resilient floors. Sweeping, dust
mopping, and vacuuming are recommendations to remove soil particles that can result in scratches and worn appearances.
Do not use vacuums with rotating beater bars on hard surfaces.
Periodic wet cleaning will be necessary to help maintain the floor’s appearance. Always pre- vacuum or dust mop before any
type of wet cleaning. Appropriate vinyl floor cleaning equipment and cleaning agents (neutral pH floor cleaners) are
recommended. Do not use abrasive cleaners or cleaning agents that leave dull residues on the surface of the floors. Follow
the cleaning manufacturer’s instructions for damp mopping and application. If rinsing is necessary, use clean water and
expedite drying with air movers or fans.
Shaw Hard Surface Cleaneror equivalent floor cleaner are recommended for general spotting and cleaning.
Avoid using mop and shine products on your resilient flooring.
SPOT & SPILL REMOVAL
Our flooring products are engineered to resist and minimize common staining.
Absorb wet spills as quickly as possible by blotting with paper or cloth towels. Rinse with water if necessary and blot dry.
Dried spots should be removed by gentle agitation and rinsed with water. Blot dry.
Use Shaw Hard Surface Cleanercleaning products or products formulated for vinyl floor cleaning. Do not use detergents or
abrasive cleaners since these products can leave a dull residue.
Use rubbing alcohol (isopropyl alcohol) with a clean white cloth for spots requiring a solvent type cleaner that water and
cleaning agents cannot remove.
Please note that some stain conditions may become permanent.
Safety Caution: The surfaces of resilient floors change during wet cleaning and finish applications. Use appropriate safety measures.
2
For reference purposes only if printed or downloaded. Revision: 12032019