User's Manual

REGULATOR LEAK OR CLIMB IN PRESSURE:
• Clean both regulators, inspect, and if necessary replace their piston seats.
LEAK IN THE GRIP FRAME, NEAR THE REGULATORS:
• Clean and inspect both regulators.
• Inspect and and replace any o-rings that show signs of damage.
LEAK BETWEEN GRIP FRAME AND BODY:
• While the Impulse
®
is pressurized, decrease the pressure in the primary regulator (turn clockwise) until
the regulator is off. If the leak stops, inspect the right side air transfer linkage, and the lower body
o-ring into which it ts – replace if damaged.
• If leak continues, inspect and if damaged replace the ring piston o-ring.
• If leak continues, inspect and if damaged replace the solenoid valve o-rings.
LEAK BETWEEN BODY HALVES:
• Inspect, and if damaged, replace the body o-rings
LEAK FROM FRONT OF MARKER
• Inspect, lubricate, and if damaged, replace the front o-ring on the ring valve core.
THE IMPULSE
®
HAS FIRST SHOT DROP OFF (FSDO)
• Clean, lubricate and inspect the bolt, ring piston and ring valve core.
• Increase the second-stage regulator pressure.
• Increase the FSDO setting value.
TRIGGER IS STUCK AND WILL NOT MOVE FREELY:
• Make sure the trigger mount screws have not been overtightened. Loosen them slightly.
• Remove the grip frame and remove the trigger. Clean any debris that may be impeding
trigger movement.
• Make sure none of the trigger adjustment screws have been set beyond their limits of operation.
TROUBLESHOOTING
IMPORTANT
WARRANTY
Smart Parts warrants for one (1) year to initial retail
purchaser that the paintball marker and regulator are free
from defects in materials and workmanship. Disposable
parts (batteries, o-rings, seals, etc.) are not warranted.
The valve assembly is warranted for six (6) months. The
solenoid and electronics on the marker are warranted for
six (6) months, plus an additional warranty of six months
for electronic parts only (installation and labor are not
included.) This warranty does not cover surface damages
(scratches and nicks), misuse, improper disassembly
and re-assembly, attempts made to drill holes or remove
metal from the external surfaces which could degrade
performance and reduce pressure safety factors of the
marker. Do not make changes to the basic marker parts
without written approval. The only authorized lubricant for
the marker is SL33K Lubricant. Use of any other lubricant
could result in voiding your warranty. Paintball mark-
ers are non-refundable. This warranty is limited to repair
or replacement of defective parts with the customer to
pay shipping costs. This warranty is effective only if the
customer returns the warranty registration card enclosed
with the marker. The warranty is non-transferrable. Do not
attempt to alter the trigger assembly in any way, as this
will void your Smart Parts Inc. warranty. Trigger alteration
of any kind may result in serious injury.
TECH SUPPORT
Our Technical Support Department is open
Monday through Friday, from 10am to 6pm
EST, and can be reached at 724-539-2660.
Additional support and downloadable product
manuals are available through our web site,
www.smartparts.com.
26
800.922.2147 www.smartparts.com