Installation Sheet

ManualsBrandsSloan ManualsPlumbingOptima Collection 2.2 GPM Deck Mounted Battery-Powered Gooseneck Body Faucet in Polished Chrome Color

Code No. 0816843

Rev. 2 (05/20)

INSTALLATION INSTRUCTIONS FOR OPTIMA SENSOR ACTIVATED LAVATORY FAUCETS

WITH THE OPTIMA CONTROL BOX

GOOSENECK DECK MOUNTED OPTIMA FAUCETS

ETF-600 Low-height,

hardwired

EBF-650 Low-height,

battery

ETF-610 Low-height,

hardwired

EBF-615 Low-height,

battery

ETF-660 Low-height,

hardwire with side sensor

EBF-665 Low-height,

battery w/side sensor

ETF-80 Mid-height,

hardwired

EBF-85 Mid-height,

battery

ETF-880 Mid-height,

hardwired

EBF-187 Mid-height,

battery

DECK MOUNTED OPTIMA FAUCETS

ETF-770 Hardwired with

side sensor

EBF-775 Battery with

side sensor

ETF-700 Hardwired

EBF-750 Battery

ETF-700-S Hardwired

with surgical bend

EBF-750-S Battery

with surgical bend

WALL MOUNTED OPTIMA FAUCETS

ETF-500 Hardwired

EBF-550 Battery

ETF-800 Hardwired

EBF-850 Battery

LIMITED WARRANTY

Unless otherwise noted, Sloan Valve Company warrants this product, manufactured and sold for commercial or industrial uses, to be free from defects in material and workmanship

for a period of three (3) years (1 year for SF faucets, special finish and PWT electronics and 30 days on PWT software) from date of first purchase. During this period, Sloan Valve

Company will, at its option, repair, replace, or refund the purchase price of any product which fails to conform with this warranty under normal use and service. This shall be the sole

and exclusive remedy under this warranty. Products must be returned to Sloan Valve Company, at customer’s cost. No claims will be allowed for labor, transportation or other costs.

This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products directly from Sloan Valve Company for purpose of resale. This warranty does

not cover the life of the battery.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES

OF ANY MEASURE WHATSOEVER.

TABLE OF CONTENTS

ETF-500-S Hardwired

with surgical bend

EBF-550-S Battery

with surgical bend

CONTROL BOX FOR ALL FAUCETS

Control Box w/ 0.5 gpm Turbine

EFP-40-A

Control Box w/1.5 gpm Turbine

EFP-11-A

Control Box w/o Turbine

EFP-39-A

• Prior To Install .......................................................................... 2.

• Mixing Valve Installation ........................................................... 2.

• Important ................................................................................ 2.

• Quick Connect Tee ................................................................... 2.

• Tools Required ......................................................................... 2.

• Deck Mounted Rough-in .......................................................... 4.

• Wall Mounted Rough-in ............................................................ 5.

• Dimensional Data .................................................................... 5.

• Troubleshooting Instructions ..................................................... 7.

• Care and Cleaning Instructions ................................................. 8.

ETF-420 Mid-height,

hardwired

EBF-425 Mid-height,

battery

ETF-410 Mid-height,

hardwired

EBF-415 Mid-height,

battery

Summary of content (10 pages)

PAGE 1
Code No. 0816843 Rev.
PAGE 2
PRIOR TO INSTALLATION Prior to installing the Sloan Optima Faucet, install the items listed below. Also, refer to rough-in illustrations on pages 4 and 5. • Lavatory/sink • Drain line • Hot and cold water supply lines or pre-tempered water supply line MIXING VALVE When installing the faucet with a Sloan mixing valve, these Installation Instructions AND the Installation Instructions packaged with the mixing valve MUST be followed.
PAGE 3
MANIFOLD INSTALLATION A. Ensure there is enough clearance for the flexible supply hose from the spout to connect to the control module B. Secure control module to wall using the included mounting accessories. The control module must be mounted on a level vertical surface with the Sloan logo on the manifold facing outwards on the top right side of the manifold. Do not mount the manifold in any other position. C.
PAGE 4
DECK MOUNTED INSTALLATIONS FAUCET FAUCET FAUCET BASE GASKET BASE GASKET BASE GASKET GASKET GASKET FAUCET RETAINER QUICK CONNECT SPOUT HOSE FAUCET RETAINER MOUNTING STUD SLOTTED MOUNTING WASHERS (2) QUICK CONNECT SPOUT HOSE WING NUTS (2) MOUNTING STUD REVOLVING NUT SENSOR CABLE QUICK CONNECT SPOUT HOSE REVOLVING NUT ETF-410 Mid-height, hardwired EBF-415 Mid-height, battery ETF-420 Mid-height, hardwired EBF-425 Mid-height, battery ETF-600 Low-height, hardwired EBF-650 Low-height, battery F
PAGE 5
DECK MOUNTED INSTALLATIONS FAUCET FAUCET WATERWAY TUBE FAUCET SPOUT SHANK BASE GASKET TRIM PLATE 3/8” SUPPLY TUBE FAUCET SENSOR CABLE SPACER (MUST BE USED WITH TRIMPLATE) GASKET QUICK CONNECT SPOUT HOSE SENSOR TRIM PLATE (OPTIONAL) FAUCET RETAINER FLAT WASHER LOCK WASHER SENSOR CABLE MOUNTING STUD REVOLVING NUT RUBBER WASHER SENSOR SHANK FAUCET SHANK WASHER WASHER NUT NUT SENSOR CABLE NUT QUICK CONNECT SPOUT HOSE QUICK CONNECT SPOUT HOSE ETF-880 Mid-height, hardwired EBF-187 Mid-heigh
PAGE 6
BELOW DECK CONTROL ROUGH-IN DIMENSIONS OPTIMA CONTROL BOX MODEL IMAGE HEIGHT WIDTH DEPTH 5” (127 mm) 6” (163 mm) 4 1/2” (115 mm) 6 1/4” (159 mm) 6” (153 mm) 4 1/2” (115 mm) 10 1/8” (258 mm) 6” (153 mm) 4 1/2” (115 mm) 10 3/4” (274 mm) 6” (153 mm) 4 1/2” (115 mm) OPTIMA CONTROL BOX OPTIMA CONTROL BOX WITH DOUBLE INLET FILTER TEE OPTIMA CONTROL BOX WITH SINGLE INLET FILTER TEE AND BDM (MIX60) OPTIMA CONTROL BOX WITH SINGLE INLET FILTER TEE AND BDT (MIX35)) QUICK CONNECT HOSE/SENSOR CABLE
PAGE 7
DECK MOUNTED FAUCET MODEL ROUGH-IN DIMENSIONS (WITHOUT TRIMPLATE) A B C D E FAUCET MODEL HEIGHT 1 MOUNTING (DECK TO TOP OF SPOUT) ETF-880/EBF-85 ETF-880/EBF-187 E FF G H PROJECTION 1 PROJECTION 2 HEIGHT 1 (CENTERLINE (CENTERLINE SPRAY MAX.
PAGE 8
GOOSENECK DECK MOUNTED / WALL MOUNTED FAUCET MODEL ROUGH-IN DIMENSIONS WITHOUT TRIMPLATE 4” Electrical Box & Plaster Ring or 2 ½” Hole for Mounting bracket 8
PAGE 9
TROUBLESHOOTING INSTRUCTIONS NOTE: To automatically check battery strength, troubleshoot, diagnose and report faucet issues with a wireless device, use the Sloan SmartPhone APP. The APP is available free-of-charge at the Apple iPhone APP store for iOS devices or the Google Play APP store for Android devices. For more information about the APP and its capabilities please visit www.Sloan.com. LED indicator light in the IR (infrared) sensor is red. A. Battery power is low.
PAGE 10
TROUBLESHOOTING INSTRUCTIONS (CONT.) Faucet delivers only a slow flow or dribble when sensor is activated. A. Water supply valve is partially closed. Open the supply stop(s) completely. B. Inlet fitting filter is clogged. Remove, clean, and reinsert. Replace with EFP101A solenoid filter kit if necessary C. Aerator or spray head is clogged. Remove, clean, and reinsert.