Use and Care Guide

CONTACT US: 972-999-9998 • 888-436-5404 • Fax [phone] • www.SlipDoctors.com
Porcelain, ceramic, enamel, cast iron, steel and natural stone.
Green solution
Scrub pad (included)
Two 1 oz bottles; 1-gallon bottle
N/A
N/A
N/A
Surfaces*
Color
Mode of Application
Size
Dry Time
Water Resistant
Stain Resistant
Product Type
Coverage
Storage
Shelf Life
Warranty
Removal
Disposal
Coefficient of
Friction*
*results may vary depending
on surface and time of
exposure
Micro-treading solution
One standard-size bathtub or standard-size shower
50°F (10°C) - 80°F (27°C); Protect from freezing
5 years
2 years
N/A
Dispose of container and unused contents in accordance with local, state,
and federal regulations.
0.63 Wet DCOF - ANSI B101.3
0.65 Wet DCOF – ANSI A137.1 / A326.3
0.72 Wet SCOF - ANSI B101.1
*This product is not for use on fiberglass or acrylic bathtubs or showers.
Technical Data Sheet
Special Features
• Barefoot Friendly
• Increases Traction
• Fast & Easy Application
• Application Time 10 Minutes
• Not a Coating
• Long-lasting Results
Suggested Uses
• Commercial and Residential
• Bathtubs
• Showers
• Hotels
• Spas
• Locker Rooms
Product Description – SlipDoctors Bathtub and Shower Treatment Kit is an all-in-one treatment kit that
contains everything you need to help make your bathtub or shower safe. This product is highly effective in
areas that stay wet consistently. It is not a coating that can wear off, but a treatment that creates
microscopic treads on the surface of the bathtub or tiled shower. Bathtub and Shower Treatment Kit will not
damage or discolor your tub or shower and there will be no appearance change after application. In just 10
minutes, this treatment will help you prevent slip-and-fall accidents in your shower or bathtub for years.
SlipDoctors Bathtub & Shower Kit
Product Characteristics and Benefits